Other for Fishing

Dr Slick PCN6FX Chain Nose Pliers Power Tool 6 Inches Silver (1817) Brand: Dr Slick Model: PCN6 Dimensions: 6 Inches Color: Silver Features: N/A Part Type: PCN6

The concept behind the Dyamant shaft.It´s a very hydrodynamic shaft, well finished, built with top level materials, rigid and versatile, with lowered pins, suitable also for ´closed´ and ´open´ head spearguns like traditonal arbaete.We suggest, for big preys, to tie the line on the bridge, in front of the preload fin.Dyamant shaft technical description.The Dyamant shaft is made in 17.4 PH rebored.Is made by 17.4 PH bars certificated by steelwork.straight and smooth.The Dyamant shaft is C.N.C.machined.The Dyamant shaft has 3 fins, 2 backwards (at 60/90 mm from tang) and one for preloadinga (at 200 mm from tang), for the 6.25 and 6.5 diameters, 4 fins, 3 backwards (at 60/90/120 mm from tang) and a…

Feature:- Oceano Shaft - Made in 17.4 PH - Shark fins - 4 fins (including 1 pre-loading fin) - Fins located very close to the mechanism for increased performance

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Double Barb with Cone 8 mm Pole.Tahitian spearshaft double barb with cone 8 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb 675 mm Pole.Tahitian spearshaft sharkfin double barb 6.75 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 65 mm Pole.Tahitian spearshaft sharkfin double barb with cone 6.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb with Cone 7 mm Pole.Tahitian spearshaft sharkfin double barb with cone 7 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb 75 mm Pole.Tahitian spearshaft single barb 7.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 675 mm Pole.Tahitian spearshaft single barb with cone 6.75 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 75 cm.81-a750m/145c.- tahitian shaft for air-gun with single barb ø 7.50 length 145cm with cone.

Aluminum tube green color, length cm 67.

Exceptional Cressi-sub rubber with external diameter of 18mm and inside of 2.5mm. Hardness shore 42. Black color. It's the traditional Cressi rubber commercialized in traditional versions under the name S45.It's perfect to use it as personalized assembly for fishers that prefer one rubber and require a lot of acceleration strength without damages made by the rod.The basic composition is pure latex of Malaysia without any kind of burden or mix of impurities in its composition, except for the black color and the inert necessary products to provide them the perfect hardness (shore 38) and make them highly resistant to UV action, salt water and ozone.All Cressi rubbers are vulcanized naturally without …

The luxe design of the Highbrow Compact takes the pocket dump up a notch. The assisted opening mechanism is smoothly activated by the convenient finger flipper. Ease of use is a priority with the ambidextrous design: the pivot lock can be accessed from both sides and the pocket clip can be arranged for left or right hand carry.Features:- 7Cr blade- Pivot Lock- Slide lock safety- Assisted opening- Drop point blade- Right or left carry- Lanyard hole- Blade length: 2.8Specifications:- Length: 6.9 in- Weight: 4.4 oz

Features:- Pliers pro aluminum 20 cm- Aluminum construction that gives it lightness in hands, high resistance to corrosion.- External hardened steel blade, easily cuts braided carbon.- Jaw hardened carbon steel with V-Grip design for maximum clamping pressure.- Internal spring that keeps open the clamp to work easily with one hand.- Curved design that allows easily work the fish`s mouth or in small spaces.- Ergonomic design.- Luxury Case included.

Made from the best high tensile spring steel drawn to 1950-2000 MPa (57-58 Rockwell ). Special coating for ultimate corrosion resistance!Round notches ( can be used with dyneema wishbones ) or shark fins.

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Thre-ated 17-4p 44hcr of 1600N/mm2. Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. They have low contents of chrome and carbon, this made them rus-tproofing. The holes for the line are finally polished using sand and pressure, the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins, are elec-tro welding and have an anti-tiring piece. The TQ-Spetton and EUROSHARK spearguns are available in 6,25 and 6,50mm, and a lot of sizes between 70 …