Other for Fishing

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Thre-ated 17-4p 44hcr of 1600N/mm2. Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. They have low contents of chrome and carbon, this made them rus-tproofing. The holes for the line are finally polished using sand and pressure, the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins, are elec-tro welding and have an anti-tiring piece. The TQ-Spetton and EUROSHARK spearguns are available in 6,25 and 6,50mm, and a lot of sizes between 70 …

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Threated 17-4p 44hcr of1600N/mm². Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. They have low contents of chrome and carbon, this made them rustproofing. The holes for the line are finally polished using sand and pressure,the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins, are electro welding and have an anti-tiring piece.

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Threated 17-4p 44hcr of1600N/mm². Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. Theyhave low contents of chrome and carbon, this made them rustproofing. The holes for the line are finally polished using sand and pressure, the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins,are electro welding and have an anti-tiring piece.

Specifications:- Length (Cm): 70

This table is a very practically divided, plastic bivvy table primarily intended for the preparation of assemblies and rigs. Divided means that its work surface is divided into 4 different sized parts for laying out all kinds of jewelry and accessories for stringing. Thanks to the high edge around the entire perimeter of the table, there is no danger that your jewelry and small items will roll off and get lost. Adjustable telescopic legs with a height of 29 to 40 cm are a matter of course. Technical information:NGT bivouac table designed for preparing assemblies and rigs4 separate surfaces with a high edge for the ideal distribution of jewelery and all necessary small itemsHeight adjustable …

Sea Falcon Pliers Long Nose Split Ring 8 Inches (1867) Brand: Sea Falcon Model: Sea Falcon Pliers Long Nose Split Ring Dimensions: 8 Inches Color: N/A Features: N/A Part Type: Sea Falcon Pliers Long Nose Split Ring

Fuji T-KWTG Size 25 Rod Guide Torzite Titanium K Frame x 1 piece (3503) Brand: Fuji Model: T-KWTG Part Type: Rod Guide Length: 61.9 mm Height: 41.2 mm Diameter: N/A Features: Titanium + Torzite Color: Silver Other Measurements: Refer to diagram

H.DESSAULT is a brand that offers high-quality spearfishing equipment, specifically designed to enhance the diving experience. Their C4 Shark Fins, with a 6.5 mm 1 Fin Shaft, are one of their most popular products. These fins provide maximum propulsion while diving, allowing for swift and efficient movement through the water. Their spearguns are also a popular choice among spearfishermen, as they offer a comfortable grip and easy handling. Additionally, H.DESSAULT offers a wide range of spearshafts, ensuring that their customers have access to the perfect size and thickness for their specific diving needs. With a focus on quality and precision, H.DESSAULT's spearfishing equipment is a top choice …

Sigal HRC shaft takes it´s name from the hardness test of the steel which is conducted by penetration with a diamond point. The shafts are made of sandvik steel with heat treatment 48/50 HRC that makes them very tenacious even when they hit the hardtest rocks. The peculiarity of this series is represented by the presence of shark-fin pins that are laser-welded in a non-through housing which avoids the presence of structural critical points.All the shafts are equipped with 4 fins, 3 of which are grouped together in a backward position while the last one is more distant and it is aimed to help loading the speargun only. The position of the latter can be customized according to the user´s

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Sharkfin Double Barb 65 mm Pole.Tahitian spearshaft sharkfin double barb 6.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb 75 mm Pole.Tahitian spearshaft single barb 7.5 mm.

Spearguns - Spearshafts.SIGALSUB Tahitian Spearshaft Single Barb with Cone 8 mm Pole.Tahitian spearshaft for air-gun single barb with cone 8mm length 145cm.

Realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms.Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.SANDVIK steel hardened externally through an exclusive plasmatic vacuum process in high temperatures.This process makes the external part to have a hardness about 60 HRC without harming the resistance to the flexion of the rod.Process of very strict control (rod by rod before to the mechanizing) to verify the perfect straightness of the rod.Flap in stainless steel of wharf AISI 301 of 0,8 mm thickness.Mechanical resistance 1269 …

Realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms.Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.SANDVIK steel hardened externally through an exclusive plasmatic vacuum process in high temperatures.This process makes the external part to have a hardness about 60 HRC without harming the resistance to the flexion of the rod.Process of very strict control (rod by rod before to the mechanizing) to verify the perfect straightness of the rod.Flap in stainless steel of wharf AISI 301 of 0,8 mm thickness.Mechanical resistance 1269 …

Fishing equipment - Tools.AMIAUD Round Gaff Hook 220x12 mm.Stainless steel boat hook with screw- thread m20,.- length:215 mm- ø 10 mm.- 80 mm opening.

Looking for an additional spool for your DAIWA BG MQ fishing reel? Look no further than the spare spool in black. Perfect for those long fishing trips or when you need to change up your line quickly, this accessory is a must-have for any angler. Crafted with high-quality materials and designed to provide optimal performance, the DAIWA BG MQ Spare Spool Black is sure to help you reel in that big catch. Don't settle for anything less than the best when it comes to your fishing gear - invest in this reliable and durable spare spool today!

Looking for an additional spool for your DAIWA BG MQ fishing reel? Look no further than the spare spool in black. Perfect for those long fishing trips or when you need to change up your line quickly, this accessory is a must-have for any angler. Crafted with high-quality materials and designed to provide optimal performance, the DAIWA BG MQ Spare Spool Black is sure to help you reel in that big catch. Don't settle for anything less than the best when it comes to your fishing gear - invest in this reliable and durable spare spool today!

Featuring the best Daiwa technologies to offset the corrosive power of the sea! The new Saltist MQ reel features a Monobloc aluminium body (MQ) and Magsealed bearings. The body houses a large Tough Digigear that transfers the power from your wrist directly to the line. The tubular Air Bail improves line lay for great casting performance even with light braid in windy conditions. If you're in the market for a new powerful and rugged reel for sea fishing, look no further than the Saltist MQ.Features:- Drag with ATD technology and carbon disks- Bearings : 6 + 1- Monobloc aluminium body and Air Rotor in ZAION- LC-ABS (Long Cast) spool- Cross spiral line lay- Single piece aluminium handle, screws …

Featuring the best Daiwa technologies to offset the corrosive power of the sea! The new Saltist MQ reel features a Monobloc aluminium body (MQ) and Magsealed bearings. The body houses a large Tough Digigear that transfers the power from your wrist directly to the line. The tubular Air Bail improves line lay for great casting performance even with light braid in windy conditions. If you're in the market for a new powerful and rugged reel for sea fishing, look no further than the Saltist MQ.Features:- Drag with ATD technology and carbon disks- Bearings : 6 + 1- Monobloc aluminium body and Air Rotor in ZAION- LC-ABS (Long Cast) spool- Cross spiral line lay- Single piece aluminium handle, screws …

All spears are made of stainless steel AISI 301 1800N/mm2 and hardened subsequently. 60 mm standard barb, but they can fit up to 75mm barbs. Demka Spetton spears are manufactured with state of the art machinery, resulting in a perfect calibration and a extraordinary finish. Made of 1,800Nm/mm2 AISI 301 steel, the most resistant on the market. They are subsequently hardened in order to avoid bending, thus providing complete and durable straight position. There are different types: single barb, double barb, line thre-aded or slide rings with traditional rivets, and ALS electro welding. Different thickness available: 6.25, 6.50 and 7mm. Refer to the Di- mensions Chart.Specifications:- Diameter:

Spearguns - Accessories.SALVIMAR Predathor Pressure Gauge With Charging Adapter Manometer.Predathor pressure gauge for pneumatics spearguns with charging adaptors.

Spearguns - Spearshafts.SALVIMAR Single Flopper Inox 17-4PH 80 mm Pacific Spearshaft.Shaft with a superior strength, dedicated for ``big game hunting´´.

LSD Rod Holder Wide Tuned Brown C Brown (9216) Brand: LSD Model: Rod Holder Wide Tuned Dimensions: 23 x 7 x 8 cm Color: Brown C Brown Features: N/A Part Type: Rod Holder Wide Tuned