Other for Fishing

Realized with a few parameters of endings and really strict levels for a greater adjustment to all kinds of mechanisms.Mechanized made with useful stainless hard metal to avoid the pollution of the material of the rod and possible points of oxide of the mechanized zones.SANDVIK steel hardened externally through an exclusive plasmatic vacuum process in high temperatures.This process makes the external part to have a hardness about 60 HRC without harming the resistance to the flexion of the rod.Process of very strict control (rod by rod before to the mechanizing) to verify the perfect straightness of the rod.Flap in stainless steel of wharf AISI 301 of 0,8 mm thickness.Mechanical resistance 1269 …

It is NOT the full reel, it is only the Spare Spool for BG MQ 2020 Spare Spool.It is a generic picture, it can not match with the real spare part.We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

It is NOT the full reel, it is only the Spare Spool for Emeralda Air LT 2021 Spare Spool. It is a generic picture, it can not match with the real spare part. We don not have a compatibility chart and we cannot ensure the compatibility of this spare part with other products or models.

Features: - Zipper accessories pocket- Shoulder strap top closure- Longitudinal hingeSpecifications: - Dimensions: ø 19×123 cm- Weight: 670 gr

Features:- Shoulder strap- Top closureSpecifications:- Dimension: 32x125 cm- Poly 600 , 670 gr

Features:- Shoulder strap- Top closureSpecifications:- Dimension: 32x125 cm- Poly 600 , 670 gr

The Sakura Aluminum Pliers is a high-end model, robust and with a neat design. It will serve you to firmly hold all types of objects but is also particularly suitable for unhooking hooks and lures. Their main use is to facilitate the opening of split rings for the replacement of hooks, of course. Equipped with ergonomic handles to ensure a better grip, the Aluminum Pliers pliers are made of aluminum for lightness and robustness. It has good resistance to saline corrosion if care is taken to rinse it with fresh water after each outing and to lubricate it regularly.Specifications:- Dimensions (cm): 17

Features:- Shaft Bolt with patented line-of-sight collimation system- Thanks to a special milling of the seam, the shaft Bolt fits perfectly with the release mechanism box of the Ares speargun- This solution keeps the shaft aligned with the shaft guide, preventing lateral movements- When launching, the energy of the bands is transferred to the thrust centre, the oscillations in the tail of the shaft are smaller, obtaining a very precise, stable shoot with greater penetrationSpecifications:- Diameter: Ø7,0 mm- Lenght: 1050mm- Material: 174Ph / Fin: made using MIM (metal injection moulding) technology. Laser welding / Flap: Capture

Exlusive Ares Spearshaft.The Ares rifle can carry its specific rod or any other as it adapts, but the Ares rod is only used for this rifle, and is not compatible with any other.Shaft Bolt with patented line-of-sight collimation systemThanks to a special milling of the seam, the shaft Bolt fits perfectly with the release mechanism box of the Ares speargunThis solution keeps the shaft aligned with the shaft guide, preventing lateral movementsWhen launching, the energy of the bands is transferred to the thrust centre, the oscillations in the tail of the shaft are smaller, obtaining a very precise, stable shoot with greater penetrationMaterial: 174PhFin: made using MIM (metal injection moulding) …

Spearguns - Spearshafts.SALVIMAR Single Flopper Inox 17-4PH 70 mm Pacific Spearshaft.Shaft with a superior strength, dedicated for ``big game hunting´´.

Spearguns - Spearshafts.SALVIMAR Single Flopper Inox 17-4PH 75 mm Pacific Spearshaft.Shaft with a superior strength, dedicated for ``big game hunting´´.

Sandvik steel shaft, shark fins realized with M.I.M. - Metal Injection Molding - applied with laser welding. Tricuspid tip for perfect penetrationSpecifications:- DIAMETER: Ø 6,5mm- LENGHT: 105cm

Made from the best high tensile spring steel drawn to 1950-2000 MPa (57-58 Rockwell). Special coating for ultimate corrosion resistance!Round notches (can be used with Dyneema wishbones) or shark fins.New Heavy duty Barb on 7mm and 7.5mm, as well as reinforced pin, makes this shaft the best allied when hunting big fish!

Rubber mini bungee to hold the shaft line to the guns muzzle and this way absorb the impact of the shot! Cork screw swivel for maximum safety holding the shaft!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Made from Sandvik stainless steel, tempered and drawn to 1500-1600 MPa (47-48 Rockwell). Sandvik stainless steel, made in Sweden, is unanimously considered the best stainless steel in the market for the production of spearfishing shafts!Available in 6mm, 6.25mm, 6.5mm, 6.75mm, 7mm, 7.5mm and 8mm with standard notches, round notches or with 2 different types of shark fins - Euro ( smaller to pass on closed muzzles ) and America ( bigger with a Hole to hold the shaft line ) , Tahitian ( up ) or Hawaiian ( Down ) Barb or M7 Threaded6.75mm and above are all equipped with Heavy Duty barb and pin!

Silicone mini bungee to hold the shaft line to the guns muzzle and this way absorb the impact of the shot!Snap swivel for the maximum speed changing the shaft!

Made from the best high tensile spring steel drawn to 1950-2000 MPa (57-58 Rockwell). Special coating for ultimate corrosion resistance!Round notches (can be used with Dyneema wishbones) or shark fins.New Heavy duty Barb on 7mm and 7.5mm, as well as reinforced pin, makes this shaft the best allied when hunting big fish!

PATHOS Shafts are made with the best stainless steel of the market, the SANDVIK. They are also heat treated to increase the hardness and to avoid bending, shafts are manufactured using computer numeric machine (CNC).We can divide our shafts in 3 groups: NOTCHES, SHARK FIN, THREAD.In all except thread we have 1 flopper or 2 floppers available ol 5 and 7 cm. Pathos designed shark fin Tab, is smoot finished in order to be used with dynema wishbone.We use 3 or 4 tabs where one can be used like rest tab. Also we have 3 kind of shark fins tabs: Small, Medium and Large.Medium and Large can hold more than one power band with dynema wishbone. All Pathos shafts has tri-cut point.

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Threated 17-4p 44hcr of1600N/mm². Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. They have low contents of chrome and carbon, this made them rustproofing. The holes for the line are finally polished using sand and pressure,the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins, are electro welding and have an anti-tiring piece.

Our spears are made of stainless steel of first quality, under the strictest technical control in stainless steel Threated 17-4p 44hcr of1600N/mm². Afterwards to cut and to give cone shape to the tip and they are hardened to avoid bending and to give them elasticity. They have low contents of chrome and carbon, this made them rustproofing. The holes for the line are finally polished using sand and pressure,the same process used in notches They have a 70mm barb, with a reinforced screw. The EUROSHARK spearguns have pins like shark fins, are electro welding and have an anti-tiring piece.