24 V car light bulbs

The K-LED 2.0 F can switch between a rotating or flashing warning signal by switch or programming A sensor measures the ambient brightness and controls the change between day / night level based on the measured values. This guarantees you the best possible warning effectiveness The beacon has been developed without moving parts and thus offers optimum protection against strong vibrations and shocks The K-LED 2.0 is characterised by a long service life The impact-resistant, extremely flat polycarbonate light dome guarantees particularly reliable protection against knocks, e.g. from branches Lamp Type: LED - Number of LEDs: 20 With flashing warning signal - Lens Colour: Green - LED colour: …

Can be synchronised with two or more units Besides continuous light, four different flash patterns (single, double, triple and quadruple flash) can be set Tested and approved according to the European Directive for beacons (ECE-R65 ) Integrated day / night mode Slim version with an installation height of only 12.8 mm Lamp Type: LED - Number of LEDs: 3 - Power consumption: 14W With flashing warning signal - Lens Colour: Crystal clear - LED colour: Blue - Fastening Type: for horizontal fastening

The new development enables maximum performance with minimalist design, because the beacon does not require a classic light dome The light is visible through a circular light band Despite its minimal light emission area, the beacon emits a clearly visible flashing warning signal and complies with European Directive ECE-R65 for use on public roads The LED technology, the materials used and the design ensure a very long service life and guarantee long-term functional reliability Further advantages are the protection against water and dust as well as the excellent electromagnetic compatibility (EMC) Lamp Type: LED - Number of LEDs: 32 - Power consumption: 13W With rotating warning signal …

Innovative wide-area LED light guide for the taillight function, combined with reflector Thanks to particularly homogeneous illumination, the taillight function is particularly well visible in the dark over a large area - for greater road safety The luminaire is characterised by a long service life, low life cycle costs and high robustness Tested to IP 6K9K, this luminaire is protected against the ingress of dust and water when permanently submerged. Consequently, it also withstands high-pressure cleaning Overvoltage protection ensures that the luminaire is not damaged even during voltage peaks according to ISO 7637 Length: 300mm - Width: 130mm - Height: 40mm - Lamp Type: LED - Number of …

Set of two modules homologated as "half bar" (ECE R65 HTA1) Wide angle coverage of at least 270° when using two modules and 360° when using four modules Synchronisation of 2 or 4 modules possible Assembly as integration into the vehicle body or body product Lamp Type: LED - Number of LEDs: 16 - Power consumption: 30W With flashing warning signal - Lens Colour: Yellow - LED colour: yellow (amber) ADR/GGVS approved - Prot.type (IP Code): IP 6K7

The special signal pattern of daytime running lights is more clearly discernible on the road during the day than normal dipped headlights, thus reducing the risk of accidents. Extremely flat installation depth of the modules Lights up automatically when the ignition is switched on. The metal housing reliably protects the lighting electronics from external influences and also serves to dissipate heat. Adaptation to the vehicle contour within the scope of the type-approved mounting positions Ø: 30mm - Height: 30mm - Lamp Type: LED - Number of LEDs: 10 - Series Connection Light functions: 2 - with daytime running light (LED)/with position light (LED)

Halogen rotating beacon Generates a rotating warning signal by means of a highly polished parabolic reflector and incandescent lamp Protected against dust and splash water Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: yellow (amber) Prot.type (IP Code): IPX9K/IP5K4K Housing material: EPDM (ethylene propylene diene Monomer (M-class) rubber) - Housing Colour: Black - Diffusing Lens Material: PC (Polycarbonate)

Robust LED worklight with corrosion-resistant plastic housing. For long-range illumination. Ideally suited as a replacement for halogen worklights With cooling fins for effective heat dissipation With 4 high-power LEDs and low power consumption of only 19 W Protection class: IP 6K7, IP 6K9K. type test: UKCA, ECE-R10, RCM, ADR / GGVSEB. EMC protection: CISPR 25 Lamp Type: LED - Number of LEDs: 4 - Power consumption: 19W - Colour Temperature: 6500K Clear diffusing lens

Halogen rotating beacon For 24V applications Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: Yellow Prot.type (IP Code): IPX9K/IP5K4K Housing material: Plastic - Housing Colour: Yellow - Diffusing Lens Material: PMMA (Polymethylmethacrylate) Height: 208mm - without bulb - Electromagnetic Compatibility (EMC)

The RotaLED Compact is the LED successor to the existing halogen beacon series Rotafix, Rotaflex and Rota Compact. These are 1:1 interchangeable Signal generation by means of electronic concept, without moving parts Compact design Impact-resistant polycarbonate light dome Dust-tight, resistant to high-pressure cleaners and protected against immersion to a depth of 1 m Lamp Type: LED - Number of LEDs: 16 - Power consumption: 7W With rotating warning signal/with indicator (LED) - Lens Colour: yellow (amber)

Classic halogen beacon for 24V applications High design for a large light emission surface and all-round visibility Scratch-resistant light bonnet Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: Yellow Prot.type (IP Code): IPX9K/IP5K4K Housing material: Plastic - Housing Colour: Orange - Diffusing Lens Material: PMMA (Polymethylmethacrylate)

Classic halogen beacon for 24V applications High design for a large light emission surface and all-round visibility Scratch-resistant light bonnet Lamp Type: H1 - Power consumption: 70W With rotating warning signal - Lens Colour: Blue Prot.type (IP Code): IPX9K/IP5K4K Housing material: ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) - Housing Colour: Black - Diffusing Lens Material: PMMA (Polymethylmethacrylate)

LED indicator light (tail lift light) for rear mounting on tail lifts - with ECE approval, without indicator failure check The flashing light has 1 light function: Flashing light With 12 yellow LEDs, 2 fixing screws M6, with moulded leads, zinc die-cast housing Length: 108mm - Height: 75mm - Lamp Type: LED - Number of LEDs: 12 - without indicator failure control Light functions: 1 - with indicator (LED) ADR/GGVS approved/ECE approved - Prot.type (IP Code): IPX9K/IP6K7 Colour: Yellow

State-of-the-art LED technology enables an optimum signal image with low power consumption Tested according to IP 6K9, this luminaire is protected against the ingress of dust and water during continuous immersion The luminaires have been tested according to HELLA standard 67101 class 6.1 and therefore meet the requirements for buses, trucks and tractors in large series over 6.5 tonnes To extend the service life of the luminaire, the components are arranged in a temperature-optimised manner. This prevents the LEDs from overheating at high temperatures. Reverse polarity protection: Incorrect contact between poles ensures that the luminaire is not damaged Length: 210mm - Width: 32mm - Height: …

State-of-the-art LED technology enables an optimum signal image with low power consumption Reverse polarity protection: Incorrect contact between poles ensures that the luminaire is not damaged Tested according to HELLA standard 67101,IP 6K9K, protected against high pressure / steam jet cleaning. The luminaires are tested according to HELLA standard 67101 class 4.1. The high vibration resistance makes this product ideal for use in heavy construction machinery. Ø: 55mm - Height: 64mm - Lamp Type: LED - Number of LEDs: 3 Light functions: 1 - with indicator (LED) CCC approved - Prot.type (IP Code): IP6K9K

Lamp Type: LED - Number of LEDs: 8 - Power consumption: 24W - Colour Temperature: 5500K Patterned diffusing lens Prot.type (IP Code): IP67 Aluminium Housing - Housing Colour: Black - Diffusing Lens Material: PC (Polycarbonate) Width: 143mm - Height: 120mm - Depth: 65mm

Together with the special honeycomb pattern in the diffusing lens, the parabolic reflector enables homogeneous illumination of the working area at close range. The black housing of this robust worklight consists of glass fibre reinforced plastic. To protect the diffusing lens, the housing is provided with a protruding edge at its front. Together with the swivel base, the handle simplifies the adjustment of the worklights, so that the working area can be optimally illuminated. The bracket enables a stable four-point mounting of the worklight. Lamp Type: H3 - Power consumption: 35/70W Patterned diffusing lens

The Mega Beam H3 is a halogen worklight whose aluminium reflector is based on free-form technology. Despite its compact dimensions, the reflector ensures excellent light output. The black lamp housing of this robust worklight consists of glass fibre reinforced plastic, which is acid-proof and corrosion-resistant. The housing is provided with a protruding edge to protect the diffusing lens. Lamp Type: H3 - Power consumption: 35/70W Patterned diffusing lens ADR/GGVS approved - Prot.type (IP Code): IP5K9K

Voltage: 24 V Rated power (w): 21 Socket type: baw9s Lamp type: h21 w

The spare bulb kit is equipped with 2 x OSRAM OE H7 24V TRUCKSTAR PRO headlamp bulbs plus other spare bulbs Ideal spare bulb kit for 24V vehicles with H7 headlamp bulbs with the H7 TRUCKSTAR PRO giving 100% more light and up to 2.5 times the lifetime of a standard 24V headlamp bulb The spare bulb kit contains. 2 x 64215TSP H7 headlamp bulbs, 2 x 7511 (P21W) bulb, 2 x 7510TSP (PY21W), 2 X 7537 (P21/5W), 2 X 5627 (R5W), 2 X 5637 (R10W), 2 X 3930 (T4W) 24V bulbs plus 15A, 20A and 30A flat fuses Essential for professional truck drivers containing all the most popular spare bulbs and fuses Easy identification with clear labelling

The classic worklight Compact and robust For versatile applications Lamp Type: H3 - Power consumption: 55/70W Patterned diffusing lens Prot.type (IP Code): IP6K9K Synthetic Material Housing - Housing Colour: Black - Diffusing Lens Material: Glass

The classic worklight Compact and robust For versatile applications Lamp Type: H3 - Power consumption: 55/70W Patterned diffusing lens Prot.type (IP Code): IP6K9K Synthetic Material Housing - Housing Colour: Black - Diffusing Lens Material: Glass