Recuperators & Ventilation Recovery

The Vent-Axia Lo-Carbon Tempra LP Single Room Heat Recovery Unit is available with a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of air as laid down in table

The Vent-Axia Lo-Carbon Tempra SELV P Single Room Heat Recovery Unit is available with Safety Extra Low Voltage, a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 318mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of

The Vent-Axia Lo-Carbon Tempra LP Single Room Heat Recovery Unit is available with a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of air as laid down in table

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra LT Single Room Heat Recovery Unit offers a constant trickle speed and a switch live to boost airflow with an adjustable five to fifty minute overrun timer and an optional three minute delay on the timer. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the …

The Vent-Axia Lo-Carbon Tempra SELV P Single Room Heat Recovery Unit is available with Safety Extra Low Voltage, a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 318mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of

Large 12'' 300mm Industrial/Commercial Extractior Fan with Fixed Grille & Wall Kit Product type: ELECTRIC FAN

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra SELV LHTP Single Room Heat Recovery Unit offers Safety Extra Low Voltage, a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls between 318 - 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an

The Vent-Axia Lo-Carbon Tempra SELV P Single Room Heat Recovery Unit is available with Safety Extra Low Voltage, a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 318mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra T Single Room Heat Recovery Unit offers a constant trickle speed and a switch live to boost airflow with an adjustable five to fifty minute overrun timer and an optional three minute delay on the timer. The units are suitable for installation into external walls up to 318mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra HTP Single Room Heat Recovery Unit offers a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra SELV LHTP Single Room Heat Recovery Unit offers Safety Extra Low Voltage, a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls between 318 - 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an

The Vent-Axia Lo-Carbon Tempra SELV LP Single Room Heat Recovery Unit is available with Safety Extra Low Voltage, a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of …

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra HTP Single Room Heat Recovery Unit offers a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra HTP Single Room Heat Recovery Unit offers a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra SELV LHTP Single Room Heat Recovery Unit offers Safety Extra Low Voltage, a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls between 318 - 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra SELV T Single Room Heat Recovery Unit offers Safety Extra Low Voltage, a constant trickle speed and a switch live to boost airflow with an adjustable five to fifty minute overrun timer and an optional three minute delay on the timer. The units are suitable for installation into external walls up to 318mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular …

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra SELV LHTP Single Room Heat Recovery Unit offers Safety Extra Low Voltage, a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls between 318 - 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing …