Recuperators & Ventilation Recovery

1 cabin BV100H-D with 2 axial fans 2 hoses of 2 meters x 10 cm, - 1 filter, - 1 power cord, - 1 instruction / warranty booklet Weight: 37 Kg Dimensions from open: 96 x 74 x 62 cm, - Suction section: 96 x 66 x 62 cm, - Material: Steel with gray finish Voltage: 230V 50 Hz, - Air intake: 710 cubic meters / hour, - Noise level: 60 dB

1 cabin BV200H-D with fan 1 hose of 2 meters x 10 cm , - 1 filter, - 1 power cord, - 1 instruction / warranty booklet Weight: 24 Kg Dimensions from open: 68 x 60 x 45 cm, - Suction section: 68 x 52.5 x 45 cm Material: Steel with gray finish, - Air intake: 355 cubic meters / hour

The TwinFresh Easy from Vents is a decentralised living room ventilation with heat recovery and is the perfect solution for ventilation of all living rooms. It integrates perfectly into your everyday life thanks to its quiet operation.

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra SELV LHTP Single Room Heat Recovery Unit offers Safety Extra Low Voltage, a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls between 318 - 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing …

The Tempra units are designed for use in bathrooms, toilets and utility areas. The Vent-Axia Lo-Carbon Tempra HTP Single Room Heat Recovery Unit offers a constant trickle speed with pull cord or switch live to boost airflow with an adjustable 5-50 minute overrun timer and optional 3 minute delay on timer or internal humidistat adjustable between 60 to 90 percent room humidity. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers

The Vent-Axia Lo-Carbon Tempra SELV LP Single Room Heat Recovery Unit is available with Safety Extra Low Voltage, a constant trickle speed and with a pullcord or switch to boost airflow. The units are suitable for installation into external walls up to 460mm thick and all installations can be carried out from inside a building. To facilitate ease of maintenance and installation the Tempra's simple construction is not difficult to fit in the same location as an existing 100mm diameter fan and offers easy access to the heat exchanger for regular maintenance. Under the Building Regulations Document F, continuous running products such as the Lo Carbon Tempra are only required to move an amount of …