Equipment Accessories

Features:1/4" thread size with 1/4" BSP taper. Sold loose.

Bakers Fluid No.3 is a specially formulated liquid flux ideal for soldering and tinning of copper and tinned materials.Easy to apply.Fast acting and economical in use, ensuring sound strong joints.No.3.Size 250ml.Additional Information:• Type: Soldering Fluid• Size: 250ml

Blue Spot flux covered solder is suitable for electrical work and soldering. 60:40 Tin/Lead. Weight: 100g.Additional Information:• Mix: 60/40• Size: 100g

Want to use your Hungarian hairdrier in Hull or your Italian iron in Ipswitch? Then look no further for your solution than this EU/GB earthed travel plug adaptor from Brennenstuhl, the market leaders in electronic technology. With decades of experience in the market, you can be assured that you will receive a product of superior, outstanding quality to provide you with an ongoing and reliable power solution. This adapter will allow you to use electrical equipment with an earthed socket system in countries with the British plug system, ideal for travelling and use on holiday with an ultra lightweight structure that can fit into most bags and luggage for easy portability. Get set to experience …

Esd Desoldering Tool~ Capacity 7,7 cm³~ Metal body~ Nozzle is heat resistant up to 200° C~ Length including nozzle: 195 mm~ ø 20 mm~ Manufactured according to DIN EN 61340 5.1 & 5.2Technical Specification:Product Standards Applicable: IEC 61340 5.1 & 5.2CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoDimensions: Length: 15mm x Height: 220mmWeight: 0.054KgWarranty: 12 months. C.K products are guaranteed for 1year against imperfect materials or workmanship. Damage caused through normal wear and tear or resulting from inappropriate u…

The swivelling hose reel enables hose extension at any angle, and quick retraction. Specifications: Max Pressure: 15 Bar Length: 30 m

5 m Professional Rubber Air Line Hose Ideal for use with the XR FLEXVOLT air compressor DCC1054

For heavy duty high flow applications

For heavy duty high flow applications

1/4" BSP. Display packed three sockets per card. Contents: 1 x 1/4" BSP PCL Parallel Union Nut / Socket (Pack of 3)

For heavy duty high flow applications

This Dinse-type adaptor enables a 35-50 accessory to be used in a 10-25 welder socket. Contents:1 x Dinse Type Adaptor Converts 10-25 to 35-50Enables the use of a Dinse-type 35-50 accessory in a 10-25 welder socket

PVC air line hoses for the workshop and industrial user, Supplied with zinc plated fittings. Manufactured to BS EN ISO 5774 Specifications Contents: 1 x Air Line Hose, 20m, 3/8"/10mm Bore, 1/4" BSP

Integral adaptor/tailpieces. Display packed two tailpieces per card.

Health and Safety Executive guidance regulations recommend a flexible isolating hose to be used between the air tool and coupling, thus isolating the tool's vibration. Supplied with PCL adaptor and appropriate male tailpiece. Manufactured to BS Specifications Contents: 1 x Air Line Whip Hose, 600mm, 1/2" BSP

Contact tips for use with MB15 MIG welding torches. Manufactured from high conductivity copper alloy. Pack of 5. Contents: 1 x MB15 MIG Torch Tips, 0.6mm (Pack of 5)

Contact tips for use with MB15 MIG welding torches. Manufactured from high conductivity copper alloy. Pack of 5. Contents: 1 x MB15 MIG Torch Tips, 0.8mm (Pack of 5)

Fitted with swivel nut connectors at either end. Manufactured in accordance with BS ISO3821, 730 and 1256 Contents: 1 x Acetylene Hose, 10m x 10mm

Fitted with swivel nut connectors at either end. Manufactured in accordance with BS ISO3821, 730 and 1256 Contents: 1 x Oxygen Hose, 10m x 10mm

Fitted with swivel nut connectors at either end. Manufactured in accordance with BS ISO3821, 730 and 1256 Contents: 1 x Propane Hose, 10m x 10mm

Regulator suitable for use with disposable gas bottles with Draper gas MIG welders, TIG welders and other manufacturers gas welders. Contents: 1 x MIG Gas Bottle Regulator Disposable Cylinder No Gauge

This compact air regulator is designed for use with air tools. It is fitted with a standard 1/4" BSP thread, which is suitable for most pneumatic tools. The 33mm diameter pressure gauge is dual marked with psi and bar. It is lightweight and easy to install and maintain for use. Contents: 1 x 1/4" BSP On-Gun Air Regulator and Gauge, 140psi Specifications: Max. inlet pressure: 140psi Gauge diameter: 33mm Weight: 108g

This compact air regulator is designed for use with air tools. It is fitted with a standard 1/4" BSP thread, which is suitable for most pneumatic tools. The 41mm diameter pressure gauge is dual marked with psi and bar. It is lightweight and easy to install and maintain for use. Contents: 1 x 1/4" BSP On-Gun Air Regulator and Gauge, 180psi Specifications: Max. inlet pressure: 180psi Gauge diameter: 41mm Weight: 116g

Collets and collet bodies hold and position the tungsten electrode in a TIG torch body. The 1.6mm collet bodies in this pack of three are for use with the Dinse Type 35–50 Air Cooled TIG Welding Torch, 4m (Stock No. 70087) and the TIG Welding Torch for All Draper Inverter/Welders (Stock No. 57096). Contents: 3 x 1.6mm TIG Torch Collet bodies Specifications: Weight: 0.039kg