Equipment Accessories

Manufactured from ABS plastic this drip tray is resistant to most chemicals and solvents. Designed to collect oil or water based fluid this item is ideal for use for vehicles or generators.

Choose from a range of blast media grits and sizes for use with your Clarke Sand Blast Cabinet or Clarke spot blast and grit gun. Clarke Aluminium Oxide Powder blasts deep to remove rust, paint corrosion and limescale. It is also suitable as a graffiti remover. It is ideal for paint removal, cleaning, etching and surface preparation. Can be used on all metals, brick, concrete and other masonry.

The large capacity Clarke COP10 10-litre oil drain pan is manufactured from tough durable plastic and is suitable for use with antifreeze and oil making it ideal for use in garages or workshops. This useful product is designed as a wide pan with integrated handles and a spout for clean disposal, which can also be connected to a hose to avoid any unnecessary spillage when being emptied. The full range of Clarke Oil Drain Pans come provided with a 12-Month Manufacturer's Warranty.

Allen key holder, HxW 115 x 105 mm, with 10 holders. Supplied = assembled. Width = 115 mm. Height = 105 mm. Number of holders = 10 pcs. (2 - 12 mm Ø). Material = steel, zinc plated. Product type = tool holders for perforated panels. 10 holders, Ø 2 - 12 mm.

Ball unit, recessed, plastic, load bearing ball Ø 19 mm. Supplied = assembled. Design of ball rollers = recessed. Ball diameter = 19 mm. Effective load = 20 kg. Ball material = plastic (POM). Housing material = sheet steel, electrolytically zinc plated. Overall height = 22 mm. Housing diameter = 29 mm. Max. speed = 0.5 m/s. Circle of holes diameter = 35 mm. Flange diameter = 49 mm. Bore hole diameter = 5.1 mm. Installation height = 10 mm. Fastening drill holes = 2. Product type = ball units. For easy movement, rotation and positioning of loads with minimal effort. Run smoothly with precise rolling characteristics. Max. conveyor speed 3 m/s. These high quality ball units are suitable for transporting p…

Features: brand new high quality Made of high quality material, durable The electrode clamp is made of copper, and a very small amount of impurities, especially phosphorus, arsenic, aluminum, etc., will greatly reduce the conductivity of copper. Assembly is simple, just push the transparent protective cover to install securely and seamlessly. 17-Pack TIG Welding Stubby Gas Lens 3/32" # 12 Hot Cup Kit for WP-17 / 18/26 Welding Guns. Specification: Name: TIG welding torch accessories Applicable to: WP-17 / 18/26 series Color: as picture shown Type: welding accessories Scope of application: TIG Tungsten Needle Clip: 2.4 Quantity: 17pcs Package Included: 3 * lens 4 * 10N24S collets 2*17GL332

High quality consumables for WP17 WP18 WP26 TIG Welding Torches. Collet, 2pcs each: 1.0mm (0.040”), 1.6mm (0.063”), 2.0mm (0.079”), 2.4mm (0.094”), 3.0mm (0.118”), 3.2mm (0.126”). Collet Body, 2pcs each: 2.4mm (3/32"), 10N32, suitable for collet 1.0mm to 2.4mm. 3.2mm (1/8"), 10N28, suitable for collet 3.0 to 3.2mm. Alumina Nozzles 1pcs each: 3#, 10N50M, 1/4” 5.5mm. 3L#, 10N50ML, 1/4” 5.5mm. 4#, 10N50, 1/4” 6.5mm. 5#, 10N49, 5/16” 8mm. 6#, 10N48, 3/8” 10mm. 7#, 10N47, 7/16” 11mm. 8#, 10N46, 1/2” 13mm. 10#, 10N45, 5/8” 16mm. Caps, 1pcs each: Long Cap 57Y02, Length 12cm (4.7”). Short Cap 57Y04, Length 2.3cm (0.9”) It is the standard consumables, so it fits all

Specifications: Automatic welding lens filter with solar charge function and fully automatic darkening. Overall process protection against UV and IR with adjustable sensitivity and delay time. Variable shade(DIN) from DIN9 to DIN13 can be adjusted by turning a shade knob. Solar powered and the power can turn on and off automatically. With low battery indication, replaceable battery and lens test button to test if the lens can work normally. High clear filter with high quality LCD and multi-layer optical filter interference. Serves to most standard welding helmet's viewing window. Type: Welding Helmet Lens Material: PP Light State: DIN 4 Dark State: from DIN 9 to DIN 13 (Free Outside

Perfo spanner holder, length 75 - 145 mm, horizontal, side ordered holder. Supplied = flat pack. Length = 145 mm. Width = 145 mm. Colour = zinc plated. Product type = tool holders for perforated panels. Horizontal, size-ordered holder. Will hold up to 8 spanners. 75-145 mm in length. Quick-fix perfolock system can be removed and repositioned with a simple 45 degree twist. Designed for use with bott perforated panels.

Perfo screwdriver holder, width 225 mm, stores up to 7 screwdrivers. Supplied = flat pack. Width = 225 mm. Colour = zinc plated. Product type = tool holders for perforated panels. Stores up to 7 screwdrivers. Quick-fix perfolock system can be removed and repositioned with a simple 45 degree twist. Designed for use with bott perforated panels.

Perfo socket holder, width 270 mm, stores up to 7 stockets. Supplied = flat pack. Width = 270 mm. Colour = zinc plated. Product type = tool holders for perforated panels. Quick-fix perfolock system can be removed and repositioned with a simple 45 degree twist. Designed for use with bott perforated panels.

Specifications: Adopting high quality copper, the welding panel adapter has good resistance to heat, and wears longer. The welding panel adapter has long wire feeding distance, and high wire feeding speed. This welding panel adapter acts well as replacement for Binzel wire feeder, with which could work well. Type: Welding Panel Adapter Product Material: Copper, Plastic Wire Feeding Speed: 68m/min Wire Feeding Advance Time: 7s Wire Feeding Lag Time: 9s Features: Durable, Good Heat Resistance, Long Service Life Cable Length: 90cm(Approx.) Reliable Wire Feeding Distance: 26m/1023.62" (Approx.) Applicable Wire Diameter: 0.8-1.2mm/0.03" (Approx.) Flange Size: Inner Diameter:

Description: It is compact and lightweight design allows you to easily control the switch with one hand, allowing you to work more easily and conveniently. Due to its ergonomic design, it can reduce hand fatigue resulting from long-term welding to improve work efficiency. Manufactured by high-quality ABS and brass material, this TIG welding torch set has a long service life. The welding torch tail is 12cm long and 1.8cm wide. The ceramic nozzle is 3cm long and 1.5cm wide. The tungsten needle clip is 2.5cm long and 0.4cm wide. The deflector is 2.2cm long and 1cm wide. You can use this set for maintenance and replacement of worn or broken TIG-9 series welding torches. Item Name: Arc Welding

Specifications: Electrode holder is made of high quality material, which is durable and wear-resistant. Handle adopts special insulation heat-resistant material, which is non-conductive, anti-scald, and is suitable for long time use. It is a perfect electrode holder for welding. Type: Welding Clamp Material: Plastic, Rubber, Brass Current Capacity: 400A Features: Non-slip, Easy to Use, Durable, Electrode Holder Size: 21.5cm x 8cm x 4.2cm(Approx.) Notes: Due to the light and screen setting difference, the items color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x Welding

Tool holder, with protective cap, pack of 5, depth 50 mm. Supplied = assembled. Depth = 50 mm. Diameter = 6 mm. Material = steel, zinc plated. Product type = tool holders for perforated panels. Vertical hook end. Protective cap. Pack of 5.

Pack of conical nozzles suitable for use with Supermig®, Electromig® and Powermig® ranges of MIG welders. Compatible with MB15 torches. Features & Benefits: • Pack of conical nozzles suitable for use with Supermig®, Electromig® and Powermig® ranges of MIG welders. • Compatible with MB15 torches. • Model No. MIG955 Specifications: Model No MIG955 Brand: Sealey Nett Weight: 0.09kg Pack Qty: 3 Torch Type: MB15