Chimneys

Clamping bracket for fixing flexible flue liner. This item is used in conjunction with a fixing plate to suspend the liner from the chimney pot. The plate is placed beneath the chimney pot and the clamping bracket placed on top. The bracket then clamps securely around the outside of the flexible flue to hold the flue in position.

Clamping bracket for fixing flexible flue liner. This item is used in conjunction with a fixing plate to suspend the liner from the chimney pot. The plate is placed beneath the chimney pot and the clamping bracket placed on top. The bracket then clamps securely around the outside of the flexible flue to hold the flue in position.

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

Created with Green-Worm condensate boilers in mind, the Vertical Flue Adaptor allows for extra flexibility when setting up an effective flue system, allowing you to use multiple flue sizes. Simple to install, piping simply pushes into the adaptor seals, creating a watertight system. The adaptor is anti-corrosion, necessary when disposing of acidic flue gases, creating a long lasting system. Compatible with all Green-Worm condensing boilers Quick and simple to install Anti-corrosion White-coated finish Aesthetically pleasing design Suitable for use with the Glow-worm Condensing Boiler range. 2 year out of box guarantee 60/100 concentric flue system To be used along side 002023604 vertical terminal…

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamel, and conforming precisely to all relevant quality standards.

Silicone Seal supplied by colt cowls and manufactured by Roccheggiani.

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamel, and conforming precisely to all relevant quality standards.

This adjustable radiation shield may be extended to suit the joist height and is set at a diameter to fit between the outter flue casing and the joist box. Should be used in conjunction with a Ventilated Fire Stop. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

This Storm Collar should be fitted above the flashing (Roof Plate) to prevent water entering between the outter skin of the flue and the flashing. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

Designed to connect, and firmly join the Clarke stoves listed below with standard 5" flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

This Wall band is used to provide lateral support for a vertical flue, giving 50mm clearance from a non-combustable wall.

Innovative design features ensure the Worcester Keyless Filling Link delivers reliable, trouble-free performance without risking backflow or overfilling. Extremely quick to install and operate WRAS approved Reduces the risk of call-outs to top up the system No need for an external filling loop

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

18inch x 18inch x 4inch/110mm pipe Aluminium Roof Flashing (MacFlash). Suitable for flat roofs and roof pitches up to 45 degrees Special corrugations that can be easily dressed to form a seal Can be used with flue pipes for condensing boilers Collar die-formed to flashing and manufactured from synthetic rubber to British Standards Easy to install and use

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Standard concentric 87 degree flue elbow for use with a 60/100 mm diameter pipe 87 Degree Flue Elbow Diameter 60/100mm Part of the Viessmann Vitodens range

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Chimney adapter for connecting stove pipe to a flexible flue liner.

Chimney adapter for connecting stove pipe to a flexible flue liner.

Multifit 135 Deg Bend 60/100 + Fixing Screws 720648501. Multifit 135 Deg Bend 60/100 + Fixing Screws 720648501.

Flue support bracket Suitable for use with any 60mm/100mm flue pipe Quick and easy to install Adjustable positioning Includes fixings Secure support

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.