Gas sensors

Flue cowls are designed to be fitted outside to chimney and flue tops to prevent rain, moisture and debris from falling into your fire or stove.

Flue cowls are designed to be fitted outside to chimney and flue tops to prevent rain, moisture and debris from falling into your fire or stove.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

When installing a vertical flue to come out the roof, keeping the elements out of any gaps or cracks should be a top priority. Water penetration should be a major concern, and dealt with accordingly using the Worcester Pitched Flashing kit, ensuring that no water can get through the roof. Compatible with all Greenstar oil-fired condensing boilers Quick and easy to install Angled to stop unwanted water entering the system To be used as part of a vertical flue installation Aesthetically pleasing design Coloured to match existing rainwater systems

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. IMPORTANT: Your stove must have a minimum of a 1 metre vitreous flue pipe between the stove and the stainless steel twin wall system.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick, whilst extending between 75-150mm. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. The Extension Length comes complete with a special locking band and provides an extension of 75mm to 150mm when slipped over a standard length. This can be used

A top quality stainless steel, high temperature insulated twin wall Tee Cap, guaranteed for 10 years against defects due to faulty manufacture. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

Rafter support brackets maintain a 50mm clearance from combustable materials andprovide lateral support.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or

Suitable for use with the Ideal's condensing gas boiler range including Independent, Logic, Logic+ and Vogue boilers, this robust, anti-corrosive flue terminal is an effective way to dispose of acidic flue gases. The terminal is white in colour in order to blend into and provide an aesthetically pleasing flue system. Quick and easy to install, you simply have to attach the terminal into the rest of the system using the push-fit connections. Suitable for use with Ideal's Logic boiler range Easy to Install Quality product Easy to use Effective disposal of acidic gases

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Known informally as a 'pot hanger cowl' or chimney liner cowl, this great new product from Colt Cowls revolutionises the method of installing a cowl or birdguard onto a flexible flue, negating the removal of the chimney pot when installing. Designed to fit 125mm/5" flexi liner.

Known informally as a 'pot hanger cowl' or chimney liner cowl, this great new product from Colt Cowls revolutionises the method of installing a cowl or birdguard onto a flexible flue, negating the removal of the chimney pot when installing. Designed to fit 150mm/6" flexi liner.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.