Routers & Trimmers Trend

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work. Extra long shank allows the cutter to trim laminate and veneer on the underside of the workpiece. Also to form shallow rebates and slots with a template or guide. Double shank mounted bearings for increased surface contact for additional stability and control. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: …

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 25 • Overall Length Metric: 56

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

Trend Trade Straight Cutter - 15mm diameter 15mm diameter x 25mm cut length for heavy duty slotting grooving and rebating with templates, side fences or in a router table using a 1/2in shank router. Centre tip design for drilling and stopped cut applications for premium results in all materials. High quality micro-granular tungsten carbide cutting edges for maximum performance and durability on laminate, chipboard, ply, MDF and solid timber. K mark shank to ensure safe working practices. Supplied in a storage tube for maximum protection when transporting from job to job. Specifications: • Shank Diameter: 1/2 • Dia Metric: 15 • Cut Length Metric: 25 • Overall Length …

For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Overall Length Metric: 95

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 105

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 70

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A 3mm approximate overlap should be left before copy profiling. When using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 13 • Overall Length Metric: 57 • Bearing Dia Metric: 15.9

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 16 • Overall Length Metric: 59 • Bearing Dia Metric: 12.7

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. Narrow diameter ideal for following tighter curves on more intricate work. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: …

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 12.7mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates on thin stock, ideal for pattern making or replicating components. Narrow diameter ideal for following tighter curves on more intricate work. 1/4in shank for easy control in smaller routers with K mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • …

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall …

Trend Professional 1/2in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative laminates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. 1/2in shank for heavier work, ideal for router table work with the template below the workpiece. K mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: …

6A Fast Charging Ð 2Ah: 32mins, 4Ah: 48mins, 5Ah: 54mins Air Cooled Ð Reduces heat build-up for more efficient faster charging LED Charge Indicators Ð Easy read indicators show ÔChargingÕ and ÔFull ChargeÕ states Protective Side Vents Ð Prevents dust and debris ingress

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

Trend Snappy HSS Imperial Drill Bit Set - 7 Piece Set 7 Piece High Speed Steel Drill Bit Set in Imperial diameters for all pilot and clearance hole applications. Comprises 1 x 1/16" drill bit, 1 x 3/32" drill bit, 1 x 1/8" drill bit, 1 x 5/32" drill bit, 1 x 3/16" drill bit, 1 x 7/32" drill bit, 1 x 1/4" drill bit. Each drill is fitted into a spring steel collet style chuck for maximum grip to prevent slippage in use and can be easily replaced if damaged. Durable HSS drill can be used on metals, alloys, plastics and all timber applications. The perfect drilling set for fast, accurate drilling across a wide range of materials for enhanced performance and productivity. Specifications: • …

Trend Snappy TCT Countersink Set - 5 piece set A 5 piece set for all your countersinking and piloting needs covering Imperial screw gauges from No4 through to No12. Comprises 1 x 2.0mm (5/64"") drill countersink, 1 x 2.5mm (3/32"") drill countersink, 1 x 2.75mm (7/64"") drill countersink, 1 x 3.25mm (1/8"") drill countersink and 1 x 3.5mm (9/64"") drill countersink with 9.5mm and 12.7mm counterbore diameters." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Adjustable drilling depth to suit material thickness with easily replaceable drills should any damage occur. Can be used to make countersinks …

Trend Snappy 4.75mm x 12.7mm TCT Counterbore - to recess screws for plugging 12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial sizes Used in conjunction with the Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters, fixings can be hidden with an almost invisible plug for a high quality, professional finish. 4.75mm diameter drill allows for pilot/screw clearance to prevent splitting and to ensure accurate, consistent alignment. Drill depth can be altered to suit material thickness and is easily replaceable if it becomes damaged. TCT cutting faces can be resharpened ensuring …

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials. Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut. Specifications: • Dia Metric: 36 • Sawbore Imperial: 1/4 • Saw Kerf Metric: 2.5 • Saw Teeth: 2