Routers & Trimmers

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 19mm • Shank Diameter: 16mm • Length of Cut: 38mm • Overall Length: 83.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 65

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly. A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed. Boards are simply clamped together until glue is cured. For larger boards, biscuits can be doubled up by making two passes. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 4 • Overall Length Metric: 76 • Bearing Dia Metric: 15…

Uses/4" shank bits
Fits RT0700 Compact Router
Allows for different profiles when using the same router bit
Ideal for trimming laminated boards and other thin materials

The Einhell TP-RO 18 Li BL is a brushless router which is a member of the Power X-Change family and will run on any 18v Power X-Change battery. This starter set includes two interchangeable bases and a selection of accessories, as well as a storage bag to keep everything in. The brushless motor in the P-RO 18 Li BL delivers excellent performance and is covered by a separate 10 year warraty when registered with Einhell. Important: The collets provided are only suitable for use with 6mm or 8mm shank accessories. These collets should not be used with 1/4" shank accessories as they can't be properly tightened and are a safety hazard. Features & Benefits • Member of the Power X-Change family …

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 19mm • Shank Diameter: 16mm • Length of Cut: 76mm • Overall Length: 121.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 25 • Overall Length Metric: 68

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: 67

Festool V-Nut Router HS S8 D11/9,5/60°
Technical features: S 8 mm. D 11.00 mm. NL 9.50 mm. GL 50.00 mm. alpha 60.00 . contents: 1 piece
Technical features: S 8 mm. D 11.00 mm. NL 9.50 mm. GL 50.00 mm. alpha 60.00 °. contents: 1 piece
Box contents: Festool V-groove cutter HS S8 D11/9.5/60
In HS steel
Box contents: Festool V-groove cutter HS S8 D11/9.5/60°