Routers & Trimmers

The first cordless router available on the Power For All 18v battery platform, the AdvancedTrimRouter 18V-8 has a brushless motor with variable speed and is supplied with a set of accessories including a parallel guide, dust extraction adaptor and a roundover bit. Compact and lightweight at just over 1kg without battery, the AdvancedTrimRouter 18V-8 is comfortable to handle and has a transparent baseplate which provides a clear view of the work area while the machine is in use. It can be used with any Power For All 18v lithium ion battery and shares battery compatibility with all other tools in the range. Features & Benefits • Compact cordless trim router • Part of the Power For All …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Bottom Cut Feature.

TCT Two flute cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Features and Benefits: Two flutes give a clean finish to cut edges TCT plunge centre tip

D - 8mmNL - 28mm

Holzmann OFT102 universal router table suitable for mounting both 1/4" and 1/2" routers. Features include a single piece solid laminated mdf table, extra large 810 x 610 mm table surface (36 mm thick), 458 x 152 mm sturdy guide fence, a tough plastic mounting plate which can be drilled to mount any router. Stepped insert rings (105/72/32 mm diameter) allow the diameter of the aperture to be reduced when working with smaller diameter cutters, steel legstand. (Router not included). Features: Suitable for 1/4" and 1/2" Routers Tough plastic mounting plate which can be drilled to fit any router model Dust extractor outlet at rear of table Stepped insert rings to reduce the apeture size when using …

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Diameter 12.7mm. Cutting length 19mm. Shank 1/4in.

Do not use on shank sleeves. The Collet holds router bits. The correct Collet size must be used at all times to avoid danger when operating. Collet • Holds Router Bits • Collet holds router bits • Correct Collet size must be used at all times to avoid danger when operating • Do not use on shank sleeves Specifications: Diameter mm: 8,00 Key width mm: 19

18V Drill Driver with Brushless Motor Technology25% more power Brushless motors have fewer moving parts results in a quiet motor that never needs maintenance. The reduced friction enables a better use of available energy from the battery pack as there is no resistance from brushes50% more run time Brushless motor technology means the carbon brush resistance is eliminated, so less battery energy is wasted. The efficiency of a brushless motor results in a greater run time from each charge2-Speed variable gearbox for efficient drilling of various materials.Drilling and hammer functions19+1 position adjustable torque control for consistent application into a variety of materials Trigger switch with …

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.