Routers & Trimmers

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on the extra-long 40mm shanks, for quick identification. Specifications Shank 1/2in. Cutting Diameter 19.1mm. Cutting Length 50.0mm.

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses Trimming plastic or plywood overlay. Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide 1/2in Shank.

Diameter (D) of 28mm and cutting height (NL) of 7mm
Made in Germany
Package Dimension : 3.94 inches L x 1.97 inches W x 1.97 inches H

Safely and effectively remove grout using your Dremel multi-tool and reduce the risk of damaging tiles compared to traditional methods.The 30° angle of the guides allows for precise and controlled removal of grout.Large guide windows offer excellent grout line visibility to ensure accuracy and safety.13mm depth adjustment to ensure a good result with different types of grout lines.Contents:1 grout removal guide and 1 grout removal accessory (569).Working length:19.0:mm.Length:5:cm.Width:5.5:cm.Depth:7.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to purchase (online distributor):Remove grout safely and effectively using your Dremel multi-tool and reduce the risk of damaging tiles compared to t…

The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is taken by wrapping around the desired internal or external corner. The central metal tab automatically bisects the angle taken for fast setting without any measurements or additional tools. This anglefix is ideal for setting mitre angles for skirting, architrave, dado rails, picture frames, moulding and more. It makes setting angles simplified, speeding up mitre work for trade and hobbyists alike.

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge routers. Cutters above and including 9.5mm have TCT plunge Centre tip

Milling Accessories

This comprehensive pack of router bits is for kitchen fitters to get perfect trims on bench tops, laminate worktops, cupboards and shelving to give your kitchen a professional look.TCT tipped ensures strength and durability, these router pieces can also be sharpened.These range in size's with 1/2" shank and the flush trim bit comes with a lubricated ball bearing guide.kitchen fitters and DIY enthusiasts alike will love this kit. Features: One Straight Bit 63 x 12.7mm with 1/2" shank Two Straight Bits 50 x 12.7 with 1/2" shank One Flush Trim Bit 25.4 x 12.7 mm with 1/4" shank Stored in blow molded storage box with a tilt for easy access Specifications: Dimensions: H:9.0 x W:6.0 x D:15.0 cm Colour: …

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

A bearing guided tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods, and plywood. 1/4in Shank Radius: 3.2mm Diameter: 22mmAdditional Information:• Shank: 1/4in• Radius: 3.2mm• Cut Diameter: 22.0mm