Routers & Trimmers

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16

Electronic variable speed with soft start. Adjustable 0 - 50mm plunge depth with fine adjuster. 7 stage turret stop. Parallel, roller and circle guides. Includes 1/2, 1/4 and 8mm and 12mm collets. Combined circular and flat sided base. Base diameter 170mm. No load speed 6000 - 26,000rpm. Includes guide bush and measurement bar.

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 34mm • Shank Diameter: 32mm • Length of Cut: 35mm • Overall Length: 119mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Two flutes • Multidirectional

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1/8in radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/8in imperial radius for matched replication. Leaves perfect fine round over detail for a contemporary eased edge profile on straight and curved edges. Two bearings supplied for round over or quirked Ovolo moulding for additional detailing options. 1/4in shank for smaller routers and easy control for hand held use. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 59

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 7.5mm • Shank Diameter: 10mm • Length of Cut: 34mm • Overall Length: 79.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 60 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 3

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Dia Imperial: 55/64 • Cut Length Metric: 19 • Overall Length Metric: 50

HM flush cutter.
490565 HM/KLS D22/8-OKF.
s 8 mm. D 22 mm. NL 8 mm
HM flush cutter.
490565 HM/KLS D22/8-OKF.
s 8 mm. D 22 mm. NL 8 mm
s 8 mm. D 22 mm. NL 8 mm