Routers & Trimmers

This Lumberjack roundover beading router bit set features tungsten carbide tips that stay sharper and last longer than regular steel tips. The router bits also have an anti-kickback design to reduce splintering and kickback, an anti-stick coating to reduce friction, a high grade pilot bearing to ensure smooth cuts and an attractive wooden display case for storage. Features: Controlled depth of cut minimizes kickback Precision ground cutting edges stay sharper Fully heat treated shanks and bodies for durability TCT for long life and excellent cut quality Specifications: Dimensions: H:9.0 x W:5.5 x D:15.0 cm Colour: Silver Material: Metal Model Number: BRS4PS14

Trend Craft Pro 1/4in shank Intumescent strip cutter - 15mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. 1/4in shank, ideal for easy control with smaller routers. Position of groove can be altered with the router plunge for correct setting for 45 minutes fire and smoke protection. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: …

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18.2 • Cut Length Metric: 50 • Overall Length Metric: 103 • Bearing Dia Metric: 18.2

Faithful Blue Poly Rope meets the needs of most trades and is suitable for a variety of applications in the home and workplace.

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 22mm • Shank Diameter: 25mm • Length of Cut: 25.5mm • Overall Length: 100mm • Square End Helix Angle: 30°

Trend Craft Pro 1/4in shank straight router cutter - 6.3mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 6.3mm wide X 25.4mm cutting depth with bottom cut feature for increased diversity including light morticing. Matched 1/4in imperial diameter, ideal for use with fittings and sheet materials in imperial dimensions for precise fitting, deep cutting profile for small furniture work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: …

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 28 • Overall Length Metric: 59

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 11mm • Shank Diameter: 12mm • Length of Cut: 41.5mm • Overall Length: 89mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Bearing guided for straight or curved work. For portable and stationary routers. Supplied as standard with Ref. BR/191 fitted. A variety of alloy bearing rings are available to give various rebate sizes. Rings are secured between the two bearings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 22.5 • Overall Length Metric: 78 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 63 • Overall Length Metric: 105