Routers & Trimmers

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 29mm • Shank Diameter: 25mm • Length of Cut: 30mm • Overall Length: 93.5mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Two flutes • Multidirectional

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 3/8 • Dia Metric: 26 • Cut Length Metric: 25.4 • Overall Length Metric: 75 • Bearing Dia Metric: 26

The Advanced tools from Bosch – Powerful for the highest demands and biggest projects
Compactness and power: AdvancedTrimRouter 18V-8 combines both and is ideal for milling edges, slots and creative motifs
Highest power and significantly longer lifetime: Thanks to the Brushless motor
Intelligent energy consumption: Demand for an optimal performance and endurance is fulfilled with the Syneon Technology
Lightweight: Its design and 1.1 kg (w/o battery) weight allows effortless DIY milling

Safely and effectively remove grout using your Dremel multi-tool and reduce the risk of damaging tiles compared to traditional methods.The 30° angle of the guides allows for precise and controlled removal of grout.Large guide windows offer excellent grout line visibility to ensure accuracy and safety.13mm depth adjustment to ensure a good result with different types of grout lines.Contents:1 grout removal guide and 1 grout removal accessory (569).Working length:19.0:mm.Length:5:cm.Width:5.5:cm.Depth:7.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to purchase (online distributor):Remove grout safely and effectively using your Dremel multi-tool and reduce the risk of damaging tiles compared to t…

This versatile double-ended bit removes damaged screws, machine screws and broken bolts from wood, metal and plastic. It can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8. Removes cleanly from wood, metal or plastic. Made from High Speed Steel. Removes screws made of any alloy including soft brass. Removes free spinning screws. Winslow tip for self centring. Double-ended (burnisher & tapered thread). Serrated extracting end of tool results in greater torque for hard to remove screws. Hex shoulder to aid removal of jammed screw or bolt. Set of two bits, sizes No.2 and No.3.Specifications:• Screw sizes=No.6 to No.14• Screws sizes=3.5 mm to 5 mm• Bolt sizes=M4 …

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 8 mm • Dia Metric: 5 • Cut Length Metric: 14 • Overall Length Metric: 120 • Type or Grade: Up-cut

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 61

Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight Flutes BS 122/4. Specifications • Milling Diameter: 16mm • Shank Diameter: 16mm • Length of Cut: 26.5mm • Overall Length: 80mm • Square End Helix Angle: 30°Features & Benefits• Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.3 • Dia Imperial: 7/8 • Dia2 Metric: 20 • Cut Length Metric: 14 • Cut Length Imperial: 35/64 • Overall Length Metric: 65.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 3.2

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 20 • Overall Length Metric: 52