Drill Bits Footprint

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain. 1 x Footprint 590 Cold Chisel 457 x 25mm

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering. Manufactured to British standard.1 x Footprint 578 Scutch Comb Holder 1.1/2inAdditional Information:• Type: Holder• Size: 38mm

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK. The Footprint 1236 Brick Bolster has additional ribs spreading down the sides and the centre of the blade for added strength and a longer life. Width 114mm (4.1/2in).

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering. Manufactured to British standard.Footprint 578 Scutch Comb Holder 1inAdditional Information:• Type: Holder• Size: 25mm

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK. 1 x Footprint 11220 Brick Bolster 100mm (4in)

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width 16mm. Chisel Length 265mm. The Footprint 1861 Grooved Plugging Chisel is supplied with a British made high visibility, high quality protective plastic moulded grip.

Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK. 1 x Footprint Brick Bolster 75mm (3in)

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain. 1 x Footprint 590 Cold Chisel 300 x 25mm

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain. 1 x Footprint 590 Cold Chisel 250 x 25mm

This Footprint Flooring Chisel is a traditional tool for lifting floor boards, chasing plaster etc. The chisel is made from carbon steel with a hardened and tempered blade. It is forged with a domed, anti-mushroom head. Not suitable for use on concrete or stone. Size 230 x 15 x 57mm (9 x 5/8 x 2.1/4in).

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width 16mm. Chisel Length 265mm. 1 x Footprint 1860 Grooved Plugging Chisel