only cutting discsin all categories
only cutting discs
United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Cutting Discs

Cutting discs with 16 mm bore

 prices on 74 models  
16 mm
clear
Show
Bosch Expert Diamond Metal 105mm 2608900531
from £15.95
Compare prices5→
Lasts up to 50x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smel more→l of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to the store to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs, and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…
Bosch Professional Op Wo H 184x16-36 Circular Saw Blade 2608640818
from £20.95 up to £27.99 
Compare prices7→
The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally s more→table SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade´s expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held, mitre, sliding mitre and table saws. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth c…
Bosch Professional Op Wo H 184x16-48 Circular Saw Blade 2608641181
from £17.00 up to £25.99 
Compare prices7→
The Optiline Wood Circular Saw Blade delivers precise quality cuts in all types of wood. Its high-quality precision-ground carbide teeth enable clean cuts, while its base blade made of dimensionally s more→table SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade´s expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held, mitre, sliding mitre and table saws. Depending on the number of teeth, different results can be achieved with all Optiline Wood Circular Saw Blades, which feature ATB (Alternate Top Bevel) tooth geometry: when equipped with a high tooth c…
Bosch Professional Se Wo H 130x16-18 Circular Saw Blade 2608640775
from £16.95 up to £20.99 
Compare prices7→
The fast blade for cuts along and across all types of wood.Specifications:- Suitable for materials: Wood- Blade diameter: 13 cm- Thickness: 1,4 mm- Bore size: 1,6 cm- Number of teeth: 18- Cutting widt more→h: 2,2 mm- Cutting result: 2
Bosch Professional Se Wo H 160x16-18 Circular Saw Blade 2608640785
from £16.95 up to £21.99 
Compare prices7→
Fast cross and longitudinal cutting - The Speedline Wood circular saw blade offers fast cross and longitudinal cuts in all types of wood.Precisely milled, high-quality carbide teeth give the disc suff more→icient robustness for fast cutting, while the disc base, made of hardened SK5 steel (>40 HRC) with stable dimensions, guarantees precision.Additionally, the drive´s expansion slots reduce vibration during use, dampening noise and generating less heat.This saw blade is suitable for all types of wood and wood materials.It is compatible with portable and bench saws.The Speedline Wood circular saw blade offers fast cross and longitudinal cuts in all types of wood.The hole works with or without reducing r…
Bosch Professional Se Wo H 184x16-24 Circular Saw Blade 2608640795
from £19.95 up to £20.99 
Compare prices7→
Features:- Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slo more→ts lower vibration during use, which dampens noise and reduces heat development- Hand-held saws: blade with ATB/FT tooth geometry for quick cuts in wood. Equivalent blade for table saws has ATB teeth- Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood- It is compatible with hand-held and table saws.Specifications:- Outer diameter mm: 184- Bore size mm: 16- Width of cut (b1) mm / Base bl. thickness (b2) mm: 2.6/1.6- Number of teeth: 24- Tooth shape: ATB/FT- Max.…
Draper Metal , 100 x 1 x 16mm
from £1.00
Compare prices6→
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper DPC Metal , 100 x 2.5 x 16mm
from £1.00
Compare prices6→
Depressed Centre (DPC) cutting disc designed for cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, whi more→ch has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper DPC Metal Grinding Disc, 100 x 6 x 16mm
from £1.13 up to £1.49 
Compare prices6→
Depressed Centre (DPC) grinding disc designed for grinding on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, w more→hich has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Manufactured to EN12413 standards.
Draper Metal Cutting Disc, 100 x 2.5 x 16mm
from £1.00 up to £1.04 
Compare prices6→
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper Zirconium Oxide Flap Disc, 100 x 16mm, 40 Grit
from £1.36 up to £1.49 
Compare prices6→
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.
Draper Zirconium Oxide Flap Disc, 100 x 16mm, 60 Grit
from £1.36 up to £1.49 
Compare prices6→
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.
Draper Zirconium Oxide Flap Disc, 100 x 16mm, 80 Grit
from £1.36 up to £1.49 
Compare prices6→
These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.
Faithfull Metal Cut Off Disc 100mm 3.2mm 16mm FAI1003M
from £0.95
Compare prices3→
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
Faithfull Depressed Centre Metal Cut Off Disc 100mm 3.2mm 16mm FAI1003MDC
from £0.95
Compare prices3→
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
Faithfull Depressed Centre Metal Grinding Disc 100mm 5mm 16mm FAI1005MDG
from £1.49
Compare prices3→
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
Faithfull Depressed Centre Metal Grinding Disc 100mm 6.5mm 16mm FAI1006MDG
from £1.49
Compare prices3→
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
Faithfull Depressed Centre Stone 100mm 3.2mm 16mm FAI1003SDC
from £0.95
Compare prices3→
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
Faithfull Depressed Centre Stone Grinding Disc 100mm 6mm 16mm FAI1006SDG
from £1.49
Compare prices3→
Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in more→stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the …
Faithfull Porcelain Tile Diamond 105mm 16mm FAIDB105CRP
from £9.95
Compare prices3→
The Faithfull Porcelain Series Diamond Blades are ideal for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppress more→ion, but they can also be used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236.This Faithfull Porcelain Diamond Blade has the following specification: Disc Diameter: 105mmBore: 16mmMax. rpm: 14,500Additional Information:• Diameter (mm): 105• Bore Diameter (mm): 16
Faithfull Stone 100mm 3.2mm 16mm FAI1003S
from £0.95
Compare prices3→
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Cut Off Disc for Stone …
Makita Metal Cutting BandSaw Blade for LB1200F 2400mm 16mm 14tpi B-16695
from £83.95
Compare prices5→
Makita Metal Cutting BandSaw Blade For LB1200F. Specifications • Blade Type: High Carbon Steel • Teeth per Inch: 14 • Speed: L • Size: 2240x16mm • Material: Nonferrous Metal / more→Cu / Ni / Ms / Zn • Model: LB1200F • Pack Quantity: 3
Makita Wood Cutting BandSaw Blade for LB1200F 2400mm 16mm 4tpi B-16667
from £66.10 up to £83.95 
Compare prices5→
Makita Wood Cutting BandSaw Blade For LB1200F. Specifications • Blade Type: High Carbon Steel • Material Guage: 165mm • TPI: 4 • Speed: H • Size: 2240x16mm • Material: Wo more→od / Cross Cut • Model: LB1200F • Pack Quantity: 3
Sealey Pack of 100 Ø100 x 1.2mm Ø16mm Bore
from £57.95 up to £73.25 
Compare prices5→
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.• Pack of 100.Technical Specifica more→tionBore: ø16mmDisc Size: ø100 x 1.2mmNett Weight: 2kgPack Qty: 100Technical Specification:Bore: 16mm Disc Size: 100 x 1.2mm Pack Quantity: 100Dimensions: Length: 105mm x Height: 110mmWeight: 2.27KgWarranty: Consumable
24 more item(s)
Pages:
1 2 3 4
Filters
Price
from£ up to£ 
Brands
Suitable for
Cutting disc diameter
Bore
Cutting disc thickness
Number of teeth
Clear parameters
Got ideas or questions about filters? Click here!
Catalog
  /  
Cutting Discs
  /  
16 mm
E-Catalog — goods catalog & prices for appliances, computers, electronics, home & office goods. Our task is to help you choose and buy cutting discs at best price in online stores. Reprint of any materials is allowed only with written consent of editorial stuff.
About us
Other countries
Have you found an error on this page? Select it and click Ctrl+Enter.
Or use "Report an error in description" function below table with parameters of particular model.
Your Region
  • United Kingdom, en
  • United Kingdom
NO DESCR
© E-Catalog, 2001—2024
Dark mode