Cutting discs with 22 mm bore

Bosch Standard Metal 125mm 2.5mm 22mm 2608603166

The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 125Bore diameter mm: 22,23Thickness mm: 2,5Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal

Bosch Standard Stone 115mm 3mm 22mm 2608603177

from £1.24 up to £1.49

Compare prices₆→

The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is intended for work on stone. For u more→se with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.Straight• Reilable Performance in Stone• Standard for Stone cutting disc cuts reliably in stone• The silicon carbide and resin blade is specifically designed for work on stoneSpecifications:Specification: C 30 S BFDiameter mm: 115Bore diameter mm: 22,23Thickness mm: 3,0

Bosch Standard Stone 125mm 3mm 22mm 2608603178

from £1.49 up to £1.63

Compare prices₆→

The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is intended for work on stone. For u more→se with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.Straight• Reilable Performance in Stone• Standard for Stone cutting disc cuts reliably in stone• The silicon carbide and resin blade is specifically designed for work on stoneSpecifications:Specification: C 30 S BFDiameter mm: 125Bore diameter mm: 22,23Thickness mm: 3,0

Bosch Standard Depressed Centre Stone 115mm 2.5mm 22mm 260860

from £1.39 up to £1.49

Compare prices₅→

The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is intended for work on stone. For u more→se with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.With depressed centre• Reilable Performance in Stone• Standard for Stone cutting disc cuts reliably in stone• The silicon carbide and resin blade is specifically designed for work on stoneSpecifications:Specification: C 30 S BFDiameter mm: 115Bore diameter mm: 22,23Thickness mm: 2,5

Draper DPC Metal Grinding Disc, 115 x 6 x 22.23mm

from £1.37 up to £2.05

Compare prices₆→

Depressed Centre (DPC) grinding disc designed for grinding on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, w more→hich has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Manufactured to EN12413 standards.

Draper Flat Stone , 115 x 2.5 x 22.23mm

from £1.41 up to £2.06

Compare prices₆→

Flat cutting discs made from premium quality resin bonded silicon carbide. Reinforced with fibreglass to improve the strength and performance. Designed for fast straight cutting of stone.

Draper Multi-Purpose , 115 x 1.2 x 22.23mm

from £1.31 up to £1.74

Compare prices₆→

Flat cutting disc designed for fast straight cutting on various metal working applications including stainless-steel (inox), steel, structural steel and sheet metal. Also suitable for use on stone, ti more→les and PVC. Manufactured from premium quality aluminium oxide, which has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. Ultra-thin 1.2mm disc for rapid efficient cutting. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 115mm angle grinders with a 22.23mm bore. Manufactured to EN12413 standards.

Faithfull Depressed Centre Metal Cut Off Disc 125mm 3.2mm 22mm FAI1253MDC

from £1.49

Compare prices₃→

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Faithfull Metal Cut Off Disc 125mm 3.2mm 22mm FAI1253M

from £1.49

Compare prices₃→

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …

Faithfull Metal Cut Off Disc 180mm 3.2mm 22mm FAI1803M

from £1.49

Compare prices₃→

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …

Faithfull Depressed Centre Metal Cut Off Disc 115mm 3.2mm 22mm FAI1153MDC

from £1.49

Compare prices₃→

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Faithfull Depressed Centre Metal Grinding Disc 115mm 6.5mm 22mm FAI1156MDG

from £1.49

Compare prices₃→

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

Faithfull Depressed Centre Metal Grinding Disc 125mm 6.5mm 22mm FAI1256MDG

from £1.49

Compare prices₃→

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

Faithfull Depressed Centre Stone 115mm 3.2mm 22mm FAI1153SDC

from £1.49

Compare prices₃→

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …

Faithfull Depressed Centre Stone Grinding Disc 115mm 6mm 22mm FAI1156SDG

from £1.49

Compare prices₃→

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in more→stock removal applications on stone and concrete. By presenting the disc to the work piece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS ? Read the manufacturer's instructions carefully? Wear goggles to guard against flying chips or dust? Inspect the condition of the wheel frequently? Adjust the guard to deflect sparks and dust? Maintain the revs …

Faithfull Stone 125mm 3.2mm 22mm FAI1253S

from £1.49

Compare prices₃→

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …

Faithfull Stone 180mm 3.2mm 22mm FAI1803S

from £1.49

Compare prices₃→

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …

Faithfull Depressed Centre Metal Cutting Disc 180 X 3.2 X 22.23Mm

1.57Buy!
£

PowerToolsDirect.com

Delivery: in United Kingdom

Report

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut and to

Sealey Ø115 x 1.2mm Ø22mm Bore

from £1.46 up to £1.65

Compare prices₆→

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.• Pack of 50.General-purpose flat more→cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. Suitable for cutting stainless steel.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Suitable for cutting stainless steel. • Model No. PTC/115CETTechnical Specification:Bore: ø22mmDisc Size: ø115 x 1.2mmNett Weight: 0.02kgDimensions: Length: 115mmWeight: 0.024KgWarranty: Consumable

Draper 94775 Metal Cutting Disc 230 X 2 X 22.23Mm each 1

1.67Buy!
£

PowerToolsDirect.com

Delivery: in United Kingdom

Report

Flat cutting disc designed for fast straight cutting on various metal working applications including steel structural steel and sheet metal. Manufactured from premium quality aluminium oxide which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. Ultra-thin 2mm disc for rapid efficient cutting. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 230mm angle grinders with a 22.23mm bore. Manufactured to EN12413 standards.PTDDRPDIR94775

Sealey Ø115 x 1.6mm Ø22mm Bore

1.70Buy!
£

Electricalworld.com

Delivery: in United Kingdom

Report

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.General-purpose flat cutting disc more→recommended for use with Sealey and other leading makes of grinding and cutting power tools. Suitable for cutting stainless steel.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Suitable for cutting stainless steel. • Model No. PTC/115CTTechnical Specification:Bore: ø22mmDisc Size: ø115 x 1.6mmNett Weight: 0.03kgDimensions: Length: 115mm x Height: 3mmWeight: 0.034KgWarranty: Consumable

Sealey Ø115 x 3mm 22mm Bore

from £1.49 up to £1.72

Compare prices₆→

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-purpose flat cutting disc recommended for use with Sealey and ot more→her leading makes of grinding and cutting power tools.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Model No. PTC/115CTechnical Specification:Bore: ø22mmDisc Size: ø115 x 3mmNett Weight: 0.08kgDimensions: Length: 30mm x Height: 115mmWeight: 0.7KgWarranty: Consumable

KLINGSPOR Klingspor A 60 TZ 115 x 1 x 22,23 mm (202400)

1.79Buy!
£

Idealo.co.uk

Delivery: in United Kingdom

Report

Multi Purpose Cutting Disc / Universal / Quantity 25 Piece / Disc Diameter 115 mm / Disc Thickness 1 mm / Bore 22.23 mm

Draper Aluminium Oxide Flap Disc, 115 x 22.23mm, 40 Grit

from £1.43 up to £1.88

Compare prices₆→

These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-press more→ure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders with a 22.23mm bore.