85 mm cutting discs

Bosch Professional X-lock Expert Hard Ceramic 85x1.4x7 Mm Diamond Cut Disc

The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics.The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features:- Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designed Continuous Rim.- Efficient Thin Blade Cuts Smoothly And Stays Cool.- Reinforced …

Channellock Fencing Tool 250mm CHAL85

59.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

The Channellock Fencing Tool combines 6 features in 1 reliable tool for fencing installation, repair, and maintece. Laser heat-treating technology has been used to harden two wire shears so you can cu more→t high tensile wire with ease and confidence. Other features include a hammer and starter for staple install as well, a claw plus puller for staple removal and wire stretching and a precision-machined crimping nest and wire splicer. Made in the USA and forged from high-carbon U.S. Steel.

DeWALT DT20592 Abrasive 75mm x 1.6mm x 9.5mm DT2 (Pack of 3)

from £4.00 up to £4.20

Compare prices₆→

Dewalt DT20592 Bonded Abrasive Cutting Discs 75mm x 1.6mm x 9.5mm (Pack of 3) The Dewalt DT20592 is a Pack of 3 General Purpose Metal Cutting Wheels with a 75mm diameter. They are 1.6mm thick and have more→a 9.5mm bore. They are designed to fit the Dewalt DCS438 Cordless 18V Cut Off Saw. Features:
- Professional aluminium oxide grain designed for cordless tools to maximise life and performance
- For cutting, grinding, and finishing inox and metal Specification:
- Bore: 9.5mm
- Diameter: 76mm
- Thickness: 1.6mm
- Depth of cut: 22mm
- Max. Speed: 24,400rpm

DeWALT Metal 115x1 Mm 50 Units 84588

from £26.99 up to £48.02

Compare prices₂→

Cutting Disc Ø115mm X 1mm 50 Units.Specifications:- Weight: 1,439 kg- Guy: Flat cutting disc- Extent: ø 115 x 1 x 22.23 mm- Ideal for: Steel / Stainless Steel- Maximum rotation speed: 12,250 rpm- Cont more→ent: 50 discs

DeWALT Metal 125x1 Mm 50 Units 84589

from £36.99 up to £55.28

Compare prices₂→

Cutting Disc Ø125mm X 1mm 50 Units.Specifications:- Weight: 1,719 kg- Guy: Flat cutting disc- Extent: ø 125 x 1 x 22.23 mm- Ideal for: Steel / Stainless Steel- Maximum rotation speed: 12,250 rpm- Cont more→ent: 50 discs

DeWALT Diamond Multi Material Disc for DCS438 76mm DT20590

from £11.95

Compare prices₅→

The DeWalt Diamond Multi Material Disc for DCS438 is suitable for cutting a wide range of materials including Drywall, Cement Board, PVC/Plastic, Fibre Glass, Metal. Specifications • DeWalt Produ more→ct Code: DT20590-QZ • Diameter: 75mm

DeWALT DT20591-QZ 76mm Diamond Continous Tile Blade (Fits DCS438)

from £6.95 up to £10.99

Compare prices₅→

Dewalt DT20591 Diamond Wheel Continuous Tile Blade 76mm The Dewalt DT20591 is a Continuous Tile Blade Cutting Wheel with a 75mm diameter and a 10mm bore. Designed to fit the Dewalt DCS438 Cordless 18V more→Cut Off Saw. Features: Incorporates a fine diamond grit for a precise chip-free finish For cutting ceramic tile, porcelain, granite, marble and stone Specification: Bore: 10mm Diameter: 76mm / 3 inches Max. Speed: 20,300rpm

Draper TCT Circular Saw Blade for Wood, 250 x 30mm, 80T

from £14.36 up to £24.88

Compare prices₆→

Carbon steel hardened, tempered and chrome plated. Cabinet pattern handles. Display packed.

Draper TCT Circular Saw Blade for Wood, 255 x 30mm, 80T

from £17.82 up to £25.24

Compare prices₆→

Carbon steel hardened, tempered and chrome plated. Cabinet pattern handles. Display packed.

Draper TCT Triple Chip Grind Circular Saw Blade, 255 x 30mm, 80T

from £17.47 up to £30.39

Compare prices₆→

This triple chip grind Tungsten Carbide-Tipped (TCT) circular saw blade cuts a groove with slanting sides. This design combines a balanced cutting force, low tooth drag and free chip flow, eliminating more→chipping in brittle materials such as laminates and chipboards. The high-quality precision-ground carbide teeth make the blade robust. The anti-kickback design prevents the blade feeding too quickly. Designed for use on all woods, aluminium, non-ferrous metals, laminates and plastics. Compatible with most 255mm circular saws with a 30mm bore including Stock No. 90170 and 79899. EN847-1 Standard. 1 x TCT Triple Chip Grind Circular Saw Blade, 255 x 30mm, 80T

Draper 50 x 9.6 x 4.0mm Depressed Centre Metal Grinding Wheel Grade A80-Q

from £2.95 up to £5.68

Compare prices₅→

Resinoid bonded aluminium oxide, maximum working speed 50m/sec. For use with Compact Air Angle Grinders and other manufacturers' similar machines.

Draper Metal , 75 x 1 x 10mm

from £1.00

Compare prices₆→

Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

Draper Metal , 50 x 1.5 x 10mm (Pack of 10)

from £7.54 up to £10.76

Compare prices₆→

Flat cutting discs designed for fast straight cutting in various metalworking applications, including steel, structural steel and sheet metal. Manufactured from premium-quality aluminium oxide that ha more→s been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 50mm grinders and cut-off tools with a 10mm bore.

Draper DPC Metal Grinding Disc, 50 x 4 x 10mm

from £2.42 up to £3.49

Compare prices₆→

Depressed Centre (DPC) grinding disc designed for grinding on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, w more→hich has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Manufactured to EN12413 standards.

Draper Expert Ceramic Flap Disc, 115mm, M14, 80 Grit

from £4.95 up to £5.25

Compare prices₅→

This premium-quality ceramic alumina provides the ultimate performance with the longest life and fastest cutting rate across all abrasives. It has a self-sharpening feature which increases high stock more→removal and durability. The strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock …

Draper Expert Zirconium Oxide Flap Disc, 115mm, M14, 80 Grit

from £3.95 up to £4.14

Compare prices₅→

This premium-quality resin bonded zirconium oxide flap disc offers enhanced cutting performance and efficiency. It has a self-sharpening feature which increases high stock removal and durability. The more→strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock No. 56488.

Draper Aluminium Oxide Flap Disc, 115 x 22.23mm, 80 Grit

from £1.41 up to £1.52

Compare prices₆→

These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-press more→ure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders with a 22.23mm bore.

Draper Aluminium Oxide Flap Discs, 115 x 22.23mm, 80 Grit (Pack of 10)

from £10.70 up to £15.08

Compare prices₆→

These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-press more→ure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders with a 22.23mm bore.

Draper Zirconium Oxide Flap Disc, 100mm, 80 Grit

from £1.95 up to £2.79

Compare prices₆→

Expert Quality, Zirconium Oxide tapered flap discs, ideal for grinding and finishing ferrous or non-ferrous metals. Manufactured from fibre backed abrasive sheet, which is securely fixed to a reinforc more→ed backing disc with a chrome plated metal centre with a 22.2mm bore. Achieves a longer life when compared to resin fibre discs.

Draper Zirconium Oxide Flap Disc, 100 x 16mm, 80 Grit

from £1.36 up to £1.49

Compare prices₆→

These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.

Draper Zirconium Oxide Flap Disc, 115 x 22.23mm, 80 Grit

from £2.00

Compare prices₆→

These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders with a 22.23mm bore.

Draper Zirconium Oxide Flap Disc, 125mm, 80 Grit

from £2.49 up to £3.83

Compare prices₆→

Expert Quality, Zirconium Oxide tapered flap discs, ideal for grinding and finishing ferrous or non-ferrous metals. Manufactured from fibre backed abrasive sheet, which is securely fixed to a reinforc more→ed backing disc with a chrome plated metal centre with a 22.2mm bore. Achieves a longer life when compared to resin fibre discs.

Draper Zirconium Oxide Flap Discs, 115 x 22.23mm, 80 Grit (Pack of 10)

from £12.40 up to £17.46

Compare prices₆→

These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders with a 22.23mm bore.

Faithfull Aluminium Oxide Abrasive Flap Disc 115mm 80g Pack of 1 FAIFD115A

from £1.95

Compare prices₃→

The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasive discs, with less vibration and reduced glazing. Benefitting from a longer life (30 x longer than fibre discs) and self-sharpening flaps, resulting in fewer disc changes. The slightly conical shape is ideal for grinding at 15-25 degree angles on contoured surfaces. For use with angle grinders.This Faithfull …