only cutting discsin all categories
only cutting discs
United Kingdom
Catalog   /   Tools & Gardening   /   Power Tools   /   Cutting Discs

Cutting discs with 22 mm bore

 prices on 303 models  
22 mm
clear
Show
Faithfull Depressed Centre Stone Cutting Disc 115 X 3.2 X 22.23Mm
0.83Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect
Draper 94781 Flat Stone Cutting Disc 115 X 2.5 X 22.23Mm each 1
0.90Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
This flat cutting disc is made from premium quality resin bonded silicon carbide. It is reinforced with fibreglass to improve the strength and performance of the disc. Designed for fast straight cutti more→ng of stone. Compatible with 115mm grinders with a 22.23mm bore.PTDDRPDIR94781
Faithfull Inox Cutting Disc 115 X 1.2 X 22.23Mm
0.91Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
The Faithfull Inox Cutting Disc enables a quick very clean cut with minimal effort. Ideal for precise vibration-free metal cutting. Manufactured from aluminium oxide abrasive grit with fibreglass re more→inforcing resin bonded to provide both safety and optimum cutting performance. This construction enables higher cutting speed low material loss and low noise. Applications include: car bodywork tank construction steel cable thin-walled profile sections and pipes made from stainless steel non-ferrous metals and composite materials. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the
Bosch Standard Metal 115mm 2.5mm 22mm 2608603164
from £0.95
Compare prices5→
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 115Bore diameter mm: 22,23Thickness mm: 2,5Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal
Bosch Rapido Inox Flat Angle Grinder Fast 115mm 1mm 22mm 2608
from £1.00
Compare prices6→
The Standard for Inox Cutting Disc is a reliable choice for working on Inox. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, sulphurous and chlorina more→ted fillers. Use this disc for cutting Inox. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with Bosch angle grinders.StraightRapido, fast and clean cuts without burr formation or blue discolouration• Reliable Performance in Inox• The Standard for Inox Cutting Disc offers a reliable choice when working with Inox• An aluminium oxide disc specifically designed for use on Inox• Free of ferrous, sulphurous and chlorinated fillersSpecifications:Specification: …
Bosch Rapido Inox Flat Angle Grinder Fast 125mm 1mm 22mm 2608
from £0.95 up to £1.73 
Compare prices6→
The Standard for Inox Cutting Disc is a reliable choice for working on Inox. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, sulphurous and chlorina more→ted fillers. Use this disc for cutting Inox. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. It is compatible with Bosch angle grinders.StraightRapido, fast and clean cuts without burr formation or blue discolouration• Reliable Performance in Inox• The Standard for Inox Cutting Disc offers a reliable choice when working with Inox• An aluminium oxide disc specifically designed for use on Inox• Free of ferrous, sulphurous and chlorinated fillersSpecifications:Specification: …
Draper Metal , 115 x 1 x 22.23mm
from £0.95 up to £1.44 
Compare prices6→
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper Metal , 125 x 1 x 22.23mm
from £0.95 up to £1.48 
Compare prices6→
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper Metal , 115 x 2.5 x 22.23mm
from £0.95 up to £1.55 
Compare prices6→
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper DPC Metal , 115 x 2.5 x 22.23mm
from £0.95 up to £1.58 
Compare prices6→
Depressed Centre (DPC) cutting disc designed for cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, whi more→ch has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Draper Stainless-Steel/Inox Metal , 115 x 1 x 22.23mm
from £0.95 up to £1.48 
Compare prices6→
Flat cutting disc designed for fast straight cutting of stainless-steel (inox). Also suitable for use on other metal working applications including steel, structural steel and sheet metal. Manufacture more→d from premium quality aluminium oxide, which has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. Ultra-thin 1mm disc for rapid efficient cutting. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 115mm angle grinders with a 22.23mm bore. Manufactured to EN12413 standards.
Faithfull Metal Cut Off Disc 115mm 3.2mm 22mm FAI1153M
from £0.95
Compare prices3→
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
Faithfull Stone 115mm 3.2mm 22mm FAI1153S
from £0.95
Compare prices3→
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Stone Cut Off Disc …
Faithfull Depressed Centre Metal Cutting Disc 115 X 3.2 X 22.23Mm
0.98Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut and to
Makita Flat Metal 230mm 3.2mm 22mm D-18334
from £0.99
Compare prices4→
Features & Benefits:Cutting and grinding discs can be used on machines as diverse as angle grinders and petrol cutters to cut or grind metal or masonry, including concrete. A wide range of reinforced more→abrasives are available for most applications.Specifications:Diameter - 230mmDisc Thickness - 2.5mmBore Diameter - 22.23mmFlat Center - YesGrit - A30SApplication:CuttingSheet steelSteelwork
Faithfull Depressed Centre Metal Cutting Disc 125 X 3.2 X 22.23Mm
1.07Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut and to
Draper 94785 Dpc Metal Cutting Disc 230 X 2 X 22.23Mm each 1
1.25Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Depressed Centre (DPC) cutting disc designed for cutting on various metal working applications including steel structural steel and sheet metal. Manufactured from premium quality aluminium oxide whi more→ch has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. Ultra-thin 2mm disc for rapid efficient cutting. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 230mm angle grinders with a 22.23mm bore. Manufactured to EN12413 standards.PTDDRPDIR94785
Faithfull Inox Cutting Disc 125 X 1.2 X 22.23Mm
1.26Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
The Faithfull Inox Cutting Disc enables a quick very clean cut with minimal effort. Ideal for precise vibration-free metal cutting. Manufactured from aluminium oxide abrasive grit with fibreglass re more→inforcing resin bonded to provide both safety and optimum cutting performance. This construction enables higher cutting speed low material loss and low noise. Applications include: car bodywork tank construction steel cable thin-walled profile sections and pipes made from stainless steel non-ferrous metals and composite materials. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the
KLINGSPOR Klingspor A 60 TZ 115 x 1 x 22,23 mm (202400)
1.35Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Multi Purpose Cutting Disc / Universal / Quantity 25 Piece / Disc Diameter 115 mm / Disc Thickness 1 mm / Bore 22.23 mm
KLINGSPOR Klingspor A 60 TZ 125 x 1 x 22,23 mm (202401)
1.39Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Multi Purpose Cutting Disc / Universal / Quantity 25 Piece / Disc Diameter 125 mm / Disc Thickness 1 mm / Bore 22.23 mm
Makita A41 Flat Metal 125mm D-18677
from £1.49
Compare prices5→
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasingFeatures & Benefits• Flat centre cutting disc • Ideal for cutting steel
Bosch Standard Metal 125mm 2.5mm 22mm 2608603166
from £1.29 up to £1.49 
Compare prices5→
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.Straight• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecifications:Specification: A 30 S BFDiameter mm: 125Bore diameter mm: 22,23Thickness mm: 2,5Materials:Ferrous metalsMaterials in Detail:Steel/ferrous metal
Bosch Expert X Lock Depressed Centre for Metal 115mm 2.5mm 22
from £1.49
Compare prices5→
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. Use this disc for cutting metal. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. With depressed centre • Fast and Powerful Cutting in Metal • X-LOCK …
Bosch Expert X Lock Depressed Centre for Metal 125mm 2.5mm 22
from £1.49
Compare prices4→
The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with de more→manding applications while delivering good results. Moreover, the disc's precision-manufactured fibreglass net ensures high stability and safety when cutting. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. Use this disc for cutting metal. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. With depressed centre • Fast and Powerful Cutting in Metal • X-LOCK …
24 more item(s)
Pages:
1 2 3 4 5 ... 13
Filters
Price
from£ up to£ 
Brands
Suitable for
Cutting disc diameter
Bore
Cutting disc thickness
Number of teeth
Clear parameters
Got ideas or questions about filters? Click here!
Catalog
  /  
Cutting Discs
  /  
22 mm
E-Catalog — goods catalog & prices for appliances, computers, electronics, home & office goods. Our task is to help you choose and buy cutting discs at best price in online stores. Reprint of any materials is allowed only with written consent of editorial stuff.
About us
Other countries
Have you found an error on this page? Select it and click Ctrl+Enter.
Or use "Report an error in description" function below table with parameters of particular model.
Your Region
  • United Kingdom, en
  • United Kingdom
NO DESCR
© E-Catalog, 2001—2024
Dark mode