LED Strips 2.1 – 3 m

Self-adhesive magnetic strip sticks to flat or curved surfaces. For lightweight applications.

Practical, self-adhesive MaxLED Invisible Connector with 5-pin plug The MaxLED Invisible Connector is designed for the MaxLED Stripes and offers a practical, invisible connection possibility for several Stripes. This turns the design into a true experience and offers flexible variations. The connector is self-adhesive, making installation very easy. It can be laid behind the wallpaper or easily painted over. It is therefore no longer visible. The length can be shortened to the optimum length at any point with scissors. The LED strips are connected via a simple plug-in system using 5-pin plugs.

MaxLED Flow basic set with RGB colour change and radio remote control for special lighting effects Whether in the hallway, in living rooms or even in the wellness area - with the MaxLED Flow basic set, unique and very individual light effects are created on the wall. The MaxLED Strip can be shortened as desired and can be installed in straight lines as well as in curved lines. It is cast in such a way that the profile is still very flexible and a large beam angle is guaranteed for optimum illumination. In addition, the set is equipped with IP67 protection so that it can also be used in bathrooms and other damp areas. In addition to the Strip and the Power Supply, the set contents also include …

LED strip MaxLED 1000 COB extension 250 cm, 2,700 K The LED strip MaxLED 1000 COB with warm white light color is suitable for extending a basic set. - self-adhesive on the back for easy mounting - lights without visible light spots

MaxLED 500 LED strip for expanding the MaxLED 500 basic strip This 2.5 m long LED strip can be used exclusively in conjunction with the MaxLED 500 basic strip of the series. It is equipped with powerful LEDs, which allow the strip to be used not only as a decorative, but also as the main lighting. In doing so, the strip can be shortened every 41.5 cm and thus adapted to the room conditions. The special coating that protects the LEDs from dust and splashing water also makes the strip a light source that can be used in damp rooms and outdoors. The required transformer is not included (it is included in the basic set - see accessories). Installation is very easy thanks to the self-adhesive back.…

LED strip MaxLED 500 for extension of the MaxLED 500 basic strip This 2.5 m long LED strip can be used exclusively in conjunction with the MaxLED 500 basic strip of the series. It is equipped with powerful LEDs, which allow the strip to be used not only as a decorative, but also as the main lighting. In doing so, the strip can be shortened every 41.5 cm and thus adapted to the room conditions. The special coating that protects the LEDs from dust and splashing water also makes the strip a light source that can be used in damp rooms and outdoors. The required transformer is not included (it is included in the basic set - see accessories). Installation is very easy thanks to the self-adhesive back.…

MaxLED 500 LED strip for expanding the MaxLED 500 basic strip This 2.5 m long LED strip can be used exclusively in conjunction with the MaxLED 500 basic strip of the series. It is equipped with powerful LEDs, which allow the strip to be used not only as a decorative, but also as the main lighting. In doing so, the strip can be shortened every 41.5 cm and thus adapted to the room conditions. The special coating that protects the LEDs from dust and splashing water also makes the strip a light source that can be used in damp rooms and outdoors. The required transformer is not included (it is included in the basic set - see accessories). Installation is very easy thanks to the self-adhesive back.…

Warm white light MaxLED LED strip extension, IP20 This warm white LED strip is used to extend a MaxLED 500 strip base set and enables an extension as needed. Due to the self-adhesive underside, the strip can be fixed on numerous flat as well as curved surfaces, so that a versatile use is possible. - for the extension of a MaxLED 500 basic set - self-adhesive - uncomplicated connection of the strips thanks to 5-pin connector

Extension for MaxLED LED strip IP20 - daylight This MaxLED LED single strip allows an extension of an already existing MaxLED basic set 500 in the light color daylight as needed. The flexibility and self-adhesive underside facilitate installation on flat as well as curved surfaces. Designed for use in dry indoor areas. - Can be shortened if required - for extension of a MaxLED 500 basic set - self-adhesive - uncomplicated connection of the strips thanks to 5-pin connector

MaxLED 500 LED strip for extending the MaxLED 500 basic strip This 2.5 m long LED strip can only be used in conjunction with the MaxLED 500 basic strip of the series. It is equipped with powerful LEDs that make it possible to use the strip not only as decorative lighting but also as main lighting. The strip can be shortened every 41.5 cm and thus adapted to the room conditions. The special coating that protects the LEDs from dust and splash water also makes the strip a light source that can be used in damp rooms and outdoors. The required transformer is not included (it is included in the basic set - see accessories). Installation is child's play thanks to the self-adhesive back. A flexible …

LED strip MaxLED 500 COB as an extension of the basic sets This 2.5 m long extension strip can be used to extend the basic sets of the MaxLED 500 COB series - quickly and easily using the 5-pin adapter. The strip cannot be used individually. - self-adhesive on the back for easy mounting

LED strip MaxLED 500 COB as basic set with homogeneous light Thanks to the COB LEDs, the LED strip Max LED 500 COB provides a homogeneous working light without visible light points. Like all MaxLED strips, it is equipped with a 5-pin adapter for convenient connection and can be extended by 2.5 m and shortened every 5 cm. The strip is still characterized by a high light output. - self-adhesive on the back for easy mounting - connection to all MaxLED accessories and control components via 5-pin adapter

Coated LED strip MaxLED 500, 3 m long including ballast The installation of the LED strip MaxLED 500 is very uncomplicated, because with the self-adhesive back it can be easily attached to the desired location. The strip emits a warm white light and is protected from splashing water and dust by a transparent coating. In combination with a suitable heat shrink tubing, the strip can also be used in damp rooms. The dimensions can be changed as desired, because the strip can be shortened or extended up to a length of 5.5 m.

Coated LED strip MaxLED 500: basic set - extendable to max. 6.5 meters The MaxLED 500 LED strip is coated and thus protected against the penetration of dust and splash water. The basic set is supplied including transformer. Expandable with additional strips, connectors and control units with remote control. If the strip is combined with a heat shrink tube, it can also be used for lighting damp rooms. The strip can also be shortened - if necessary. - Easy to assemble plug-in system - adhesive on the back for easy mounting - easy to mount on smooth and uneven surfaces - dimmable with MaxLED dimming/switching controller (not included) - incl. 5-pin connector for easy connection of the strips

MaxLED 500 LED strip basic set incl. LED transformer, daylight white With the MaxLED 500 LED strip basic set, numerous room illuminations can be realized, because the powerful strip enables a light pattern on different surfaces as required. This is possible on the one hand due to the self-adhesive underside and on the other hand due to the flexibility of the strip. The basic set includes a suitable ballast, and the set can also be extended with extension strips (see accessories). A suitable remote control for switching or dimming the strip is also available separately. - shortenable - easy mounting due to self-adhesive back - material flexible for mounting on flat or curved surfaces - easy mounting …

Basic set LED Strip Max LED: expandable up to 500 cm The basic set Max LED contains one LED strip of 300 cm length. The installation is very simple. The strip is simply glued on. It is equipped with a coating that protects against splashing water and dust. Thanks to "Tunable White" - the intelligent white light control - the strip's LED lighting, which has a total power of 20 watts, can be completely adjusted to personal needs: from daylight white work light with 6,000 Kelvin to cozy mood light with 2,700 Kelvin. The ballast and the control unit including infrared remote control are already included in the scope of delivery. - shortenable

MaxLED 250 Strip extension, Tunable White, suitable for damp locations - 30 LEDs per meter - thanks to coating "Protecting Cover" with splash water protection (IP44); usable in bathroom etc. - divisible each 16.7 cm / 5 LEDs - for extension of basic set - easy connection thanks to 5-pin connector system - with adhesive tape on the back

Self-adhesive LED strip to expand the MaxLED 250 basic set, IP44 This splash-proof extension strip serves as an extension to an existing MaxLED 250 LED. It is self-adhesive on the back and can be easily connected to the existing strip via a plug connection. - for the extension of a MaxLED 250 basic set - self-adhesive - easy mounting and connection of the strips thanks to 5-pin connector

MaxLED 250 Strip extension, Tunable White, for indoors - 30 LEDs per meter - divisible each 16,7 cm / 5 LEDs - for extension of basic set - easy connection thanks to 5-pin connector system - with adhesive tape on the back

MaxLED LED strip extension IP20, light color daylight With this strip, an already existing MaxLED LED strip base set can be expanded and extended as desired. Due to the self-adhesive bottom side, the strip is easy to install, moreover, the strip can be shortened to the required length. - for the extension of a MaxLED 250 basic set - self-adhesive - uncomplicated connection of the strip thanks to 5-pin connector

MaxLED 250 Strip extension, warm white, suitable for damp locations - 30 LEDs per meter - thanks to coating "Protecting Cover" with splash water protection (IP44); usable in bathroom etc. - divisible each 16.7 cm / 5 LEDs - for extension of basic set - easy connection thanks to 5-pin connector system - with adhesive tape on the back

MaxLED LED Strip Extension IP44 RGBW This strip can be used to expand and extend an existing MaxLED RGBW LED strip base set. Due to the self-adhesive bottom side, the strip is easy to install, moreover, the strip can be shortened to the required length. - Protection class: IP44 - for the extension of a MaxLED 250 RGBW basic set - self-adhesive - uncomplicated connection of the strips thanks to 5-pin connector

MaxLED 250 Strip extension, coloured and warm white, for indoor use - LEDs per meter - visible each 16,7 cm / 5 LEDs - r extension of basic set - sy connection thanks to 5-pin connector system - th adhesive tape on the back