LED Strips 2.1 – 3 m

.container a:link { color: blue; } .container a:visited { color: purple; } .container a:hover { color: red; } .container a:active { color: green; } Zexum Tumble Dryer Flexible Vent Hose Duct 4 more→Inch / 100mm x 3m This 4 x 3m vent hose from Zexum is a quality replacement part for your tumble dryer. Tumble dryer vents can tear with age and considerably lower the performance of your machine. This product is ideal for boosting the performance of an old machine, or as a replacement part for a known hose fault. This product can fit tumble dryers sold by many different manufacturers and brands, and is the standard diameter for most machines, however, please see your machine for more …

Self-adhesive magnetic strip sticks to flat or curved surfaces. For lightweight applications.

MaxLED LED strip extension IP20, light color daylight With this strip, an already existing MaxLED LED strip base set can be expanded and extended as desired. Due to the self-adhesive bottom side, the more→strip is easy to install, moreover, the strip can be shortened to the required length. - for the extension of a MaxLED 250 basic set - self-adhesive - uncomplicated connection of the strip thanks to 5-pin connector

MaxLED 250 Strip extension, warm white, for indoors - LEDs per meter - visible each 16,7 cm / 5 LEDs - r extension of basic set - sy connection thanks to 5-pin connector system - th adhesive tape on the back

Practical, self-adhesive MaxLED Invisible Connector with 5-pin plug The MaxLED Invisible Connector is designed for the MaxLED Stripes and offers a practical, invisible connection possibility for sever more→al Stripes. This turns the design into a true experience and offers flexible variations. The connector is self-adhesive, making installation very easy. It can be laid behind the wallpaper or easily painted over. It is therefore no longer visible. The length can be shortened to the optimum length at any point with scissors. The LED strips are connected via a simple plug-in system using 5-pin plugs.

Self-adhesive LED strip to expand the MaxLED 250 basic set, IP44 This splash-proof extension strip serves as an extension to an existing MaxLED 250 LED. It is self-adhesive on the back and can be easi more→ly connected to the existing strip via a plug connection. - for the extension of a MaxLED 250 basic set - self-adhesive - easy mounting and connection of the strips thanks to 5-pin connector

MaxLED 250 Strip extension, Tunable White, for indoors - 30 LEDs per meter - divisible each 16,7 cm / 5 LEDs - for extension of basic set - easy connection thanks to 5-pin connector system - with adhe more→sive tape on the back

MaxLED 250 Strip extension, warm white, suitable for damp locations - 30 LEDs per meter - thanks to coating "Protecting Cover" with splash water protection (IP44); usable in bathroom etc. - divisible more→each 16.7 cm / 5 LEDs - for extension of basic set - easy connection thanks to 5-pin connector system - with adhesive tape on the back

MaxLED 250 strip set 3 m, warm white, for indoors - Delivery includes supply line and plug transformer - 30 LEDs per meter - divisible each 16,7 cm / 5 LEDs - easy to extend thanks to 5-pin plug-in sy more→stem - dimmable via separately available remote control (see accessories) - with adhesive tape on the back

MaxLED 250 LED strip basic set, daylight, for indoors This LED strip is supplied as a basic set including a plug-in power supply unit; this enables uncomplicated power supply via the socket. Due to th more→e self-adhesive underside and flexibility, the strip can be mounted on numerous flat as well as curved surfaces - be it on furniture, walls or ledges. An extension or shortening of the strip is also possible without any problems, corresponding extension strips are available as accessories. - Delivery includes supply line and plug-in transformer - can be shortened - uncomplicated expandable thanks to 5-pin plug-in system - dimmable via separately available remote control (not included) - with adhesive …

MaxLED 250 Strip extension, coloured and warm white, for indoor use - LEDs per meter - visible each 16,7 cm / 5 LEDs - r extension of basic set - sy connection thanks to 5-pin connector system - th ad more→hesive tape on the back

MaxLED 250 Strip extension, Tunable White, suitable for damp locations - 30 LEDs per meter - thanks to coating "Protecting Cover" with splash water protection (IP44); usable in bathroom etc. - divisib more→le each 16.7 cm / 5 LEDs - for extension of basic set - easy connection thanks to 5-pin connector system - with adhesive tape on the back

LED strip MaxLED 500 COB as an extension of the basic sets This 2.5 m long extension strip can be used to extend the basic sets of the MaxLED 500 COB series - quickly and easily using the 5-pin adapte more→r. The strip cannot be used individually. - self-adhesive on the back for easy mounting

Wattage per metre: 15WLumens per metre: 1750 lmsSpotless lighting effect with COB (Chip On Board) designCut points: 50mmColour temperature: Extra Warm White 2700KIP Rating: IP20 - no resistance to wat more→erLength: 3MInput Cable: 1M

Wattage per metre: 15WLumens per metre: 1750 lmsSpotless lighting effect with COB (Chip On Board) designCut points: 50mmColour temperature: Warm white 3000KIP Rating: IP20 - no resistance to waterLeng more→th: 3MInput Cable: 1M

Wattage per metre: 15WLumens per metre: 2000 lmsSpotless lighting effect with COB (Chip On Board) designCut points: 50mmColour temperature: Cool white 4000KIP Rating: IP20 - no resistance to waterLeng more→th: 3MInput Cable: 1M

MaxLED 250 strip set, warm white, suitable for damp locations - livery includes supply line and plug-in transformer - anks to coating "Protecting Cover" with splash water protection (IP44); usable in more→bathrooms etc. - LEDs per meter - visible each 16,7 cm / 5 LEDs - sy to extend thanks to 5-pin plug-in system - mmable via separately available remote control (see accessories) - th adhesive tape on the back

MaxLED LED Strip Extension IP44 RGBW This strip can be used to expand and extend an existing MaxLED RGBW LED strip base set. Due to the self-adhesive bottom side, the strip is easy to install, moreove more→r, the strip can be shortened to the required length. - Protection class: IP44 - for the extension of a MaxLED 250 RGBW basic set - self-adhesive - uncomplicated connection of the strips thanks to 5-pin connector

MaxLED 250 strip set, daylight white, suitable for damp locations - Delivery includes supply line and plug-in transformer - thanks to coating "Protecting Cover" with splash water protection (IP44); us more→able in bathroom etc. - 30 LEDs per meter - divisible each 16,7 cm / 5 LEDs - easy to extend thanks to 5-pin plug-in system - dimmable via separately available remote control (see accessories) - with adhesive tape on the back

LED strip MaxLED 1000 COB extension 250 cm, 2,700 K The LED strip MaxLED 1000 COB with warm white light color is suitable for extending a basic set. - self-adhesive on the back for easy mounting - lig more→hts without visible light spots

MaxLED 250 Strip Set 3 m, Tunable White, for indoor use - Delivery includes remote control, distributor and supply line with plug transformer - 30 LEDs per meter - divisible each 16,7 cm / 5 LEDs - ea more→sy to extend thanks to 5-pin plug-in system - with adhesive tape on the back

MaxLED 500 LED strip for expanding the MaxLED 500 basic strip This 2.5 m long LED strip can be used exclusively in conjunction with the MaxLED 500 basic strip of the series. It is equipped with powerf more→ul LEDs, which allow the strip to be used not only as a decorative, but also as the main lighting. In doing so, the strip can be shortened every 41.5 cm and thus adapted to the room conditions. The special coating that protects the LEDs from dust and splashing water also makes the strip a light source that can be used in damp rooms and outdoors. The required transformer is not included (it is included in the basic set - see accessories). Installation is very easy thanks to the self-adhesive back.…