LED Strips

Kosnic NIVA III 6FT Multi Wattage CCT LED Batten

Collingwood Emergency Twin Spot 400lm Self Test

Collingwood Halo CCT Anthracite 12W Wall Light Standard

Ovia 100W LED Floodlight IP65 4000K Black

Kosnic Trent Multi Wattage CCT 4FT Non-Corrosive Light Emergency

Kosnic Maly Retail LED Downlight Module 40W 4000K 20 Degree Beam Angle

Kosnic Maly Retail LED Downlight Module 40W 4000K 40 Degree Beam Angle

Kosnic Maly Retail LED Downlight Module 40W 5000K 20 Degree Beam Angle

Kosnic Maly Retail LED Downlight Module 40W 5000K 40 Degree Beam Angle

Kosnic Kennet II Surface Mount Multi Wattage CCT 4FT LED Batten

Kosnic Kennet Surface Mount Slim Multi Wattage CCT LED Batten 30W 4FT

Ovia Colour Switchable Linear 17W Single LED Batten 4FT

Wattage per metre: 15WLumens per metre: 1750 lmsSpotless lighting effect with COB (Chip On Board) designCut points: 50mmColour temperature: Extra Warm White 2700KIP Rating: IP65 - water & dust resista more→nceLength: 6MInput Cable: 1M

Wattage per metre: 15WLumens per metre: 1750 lmsSpotless lighting effect with COB (Chip On Board) designCut points: 50mmColour temperature: Warm white 3000KIP Rating: IP65 - water & dust resistanceLen more→gth: 6MInput Cable: 1M

Wattage per metre: 15WLumens per metre: 2000 lmsSpotless lighting effect with COB (Chip On Board) designCut points: 50mmColour temperature: Cool white 4000KIP Rating: IP65 - water & dust resistanceLen more→gth: 6MInput Cable: 1M

Coated LED strip MaxLED 500: basic set - extendable to max. 6.5 meters The MaxLED 500 LED strip is coated and thus protected against the penetration of dust and splash water. The basic set is supplied more→including transformer. Expandable with additional strips, connectors and control units with remote control. If the strip is combined with a heat shrink tube, it can also be used for lighting damp rooms. The strip can also be shortened - if necessary. - Easy to assemble plug-in system - adhesive on the back for easy mounting - easy to mount on smooth and uneven surfaces - dimmable with MaxLED dimming/switching controller (not included) - incl. 5-pin connector for easy connection of the strips

Coated LED strip MaxLED 500, 3 m long including ballast The installation of the LED strip MaxLED 500 is very uncomplicated, because with the self-adhesive back it can be easily attached to the desired more→location. The strip emits a warm white light and is protected from splashing water and dust by a transparent coating. In combination with a suitable heat shrink tubing, the strip can also be used in damp rooms. The dimensions can be changed as desired, because the strip can be shortened or extended up to a length of 5.5 m.

Kosnic Avon III 34-60W 4000K 5FT Twin Non-Corrosive Light Emergency

LED strip MaxLED 500 for extension of the MaxLED 500 basic strip This 2.5 m long LED strip can be used exclusively in conjunction with the MaxLED 500 basic strip of the series. It is equipped with pow more→erful LEDs, which allow the strip to be used not only as a decorative, but also as the main lighting. In doing so, the strip can be shortened every 41.5 cm and thus adapted to the room conditions. The special coating that protects the LEDs from dust and splashing water also makes the strip a light source that can be used in damp rooms and outdoors. The required transformer is not included (it is included in the basic set - see accessories). Installation is very easy thanks to the self-adhesive back.…

Kosnic Congo CCT Non-Corrosive Light 5FT Twin 62W

Kosnic Trent II Multi Wattage CCT 6FT Non-Corrosive Light Microwave Sensor

Kosnic Avon III 10-18W 4000K 4FT Single Non-Corrosive Light Emergency & Microwave Sensor