HDD 3.5 pockets

The S352BU33RER 2-Bay RAID enclosure lets you build an external RAID array with two 3.5 SATA hard drives and connect to your computer through USB 3.0 or eSATA.

For fast performance and efficient data transfers the enclosure supports SATA III transfer speeds -- up to 6 Gbps when connected through eSATA. The versatile RAID enclosure can also be connected through USB 3.0 with support for UASP performing up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.

The external RAID enclosure features a hardware RAID controller supporting JBOD Spanning RAID 0 and RAID 1 -- to achieve greater drive capacity …

Portable HDD Rack / Internal Interface SATA I / 3.5 Inch / Max Hard Drives 1

Turn A 2.5 Sata Hdd/Ssd Into A 3.5 Sata DriveThe 25Sat35hdd 2.5" To 3.5" Hard Drive Adapter Enclosure Turns A 2.5" Sata Hard Drive (Hdd) Or Solid State Drive (Ssd) Into A 3.5" Drive.The Adapter Enclosure Lets You Substitute A 3.5" Hard Drive For A 2.5" Ssd/Hdd In Any Application That Would Typically Require A 3.5" Drive Such As Desktop Chassis Backplane Or Docking Station. The Enclosure Has TheSame Dimensions As A Standard 3.5" Hard Drive Including Mounting Points And Sata Connector Locations.With Support For Drives Up To 12.5Mm In Height And High-Capacity Sata I/Ii/Iii Drives (Tested Up To 1Tb) This Hdd Adapter Ensures Compatibility With Virtually Any 2.5" Sata Hard Drive Or Solid State Drive.…

Conceptronic 3.5" Hard Disk Box

Mounting adapter allows a 2.5" SSD or HDD to fit into a 3.5" PC drive bay.

The 25SATSAS35 2.5-inch SATA/SAS to 3.5-inch SATA Hard Drive Converter converts a 2.5-inch SATA or SAS hard drive (HDD) or solid state drive (SSD) into a 3.5-inch form factor SATA Hard Drive. The converter provides a versatile solution for 2.5-inch drive installations, enabling you to install a 2.5-inch SATA/SAS drive in a 3.5-inch bay, drive drawer caddy/tray, or into a 3.5-inch drive enclosure. Suitable for drives with a height of up to 15mm, virtually any 2.5-inch SATA or SAS hard drive can be made to look and function like a 3.5-inch hard drive - complete with standard mounting points along the sides and bottom (including 3 points along the sides for compatibility with some Dell systems).…

CoreParts MS-CLONER-SATA2.5-3.5 storage drive docking station Black

QNAP TL-D800C HDD/SSD enclosure Black 2.5/3.5"

LogiLink UA0154 storage drive enclosure 3.5"