Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110
 | from £4,471.00 Buy!  Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110Quzo.co.ukDelivery: to United Kingdom Report |
 |
Close
Buy Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110
When you make a purchase through links on our site, we may receive a affiliate commission.
Bose PowerMatch PM8500N 8.0 channels Performance/stage Black 343546-4110 | £4,471.00 | | |||
PowerMatch PM8500N Configurable Amplifier
The Bose? PowerMatch PM8500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration control and monitoring and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance efficiency and ease of installation—all in a reliable proprietary design.
• QuadBridge™ Technology – Allows each 4-channel loudspeaker block to be configured as Mono V-Bridge I-Share or Quad modes allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
• Bose? ControlSpace? Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
Auto-Standby/Auto-Wake function – When enabled this function automatically enters/exits Standby Mode allowing the system to consume less power.
• Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance the amplifier consistently delivers the widest possible dynamic range frequency response and lowest possible distortion.
• PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
• Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
- Features
- Type Amplifier
The Bose? PowerMatch PM8500N configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-based networking enables configuration control and monitoring and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance efficiency and ease of installation—all in a reliable proprietary design.
• QuadBridge™ Technology – Allows each 4-channel loudspeaker block to be configured as Mono V-Bridge I-Share or Quad modes allowing the total available power of the amplifier block to be allocated to one or more output channels. The amplifier is capable of driving both low impedance and 70/100V loudspeaker loads directly.
• Bose? ControlSpace? Designer™ software – PowerMatch amplifiers can be fully configured using ControlSpace Designer software via the front panel USB connection or the rear panel Ethernet connection. Using ControlSpace Designer software you can access additional features including: Parametric EQ stages load sweep of each output channel and auto standby. ControlSpace Designer software is also used to integrate network model PowerMatch amplifiers into larger control and monitoring systems comprised of Bose ESP processors and CC control centers.
Auto-Standby/Auto-Wake function – When enabled this function automatically enters/exits Standby Mode allowing the system to consume less power.
• Dual voltage and current feedback loop – Proprietary design combines Class-D efficiency with a unique current and voltage feedback loop circuit that continuously monitors and controls both the current and voltage delivered to the loudspeaker load. Independent of power level and load impedance the amplifier consistently delivers the widest possible dynamic range frequency response and lowest possible distortion.
• PeakBank™ power supply – Regenerative 4-quadrant power supply enables higher power density while allowing the re-use of energy from reactive loads that is normally wasted in conventional Class-D designs. This highly efficient amplifier design delivers sustainable and repeatable low frequency response.
• Fast-tracking power factor correction (PFC) – Efficiently manages the current drawn from the AC mains allowing the amplifier to drive loudspeakers to maximum output longer without power fluctuation. PFC provides superior transient response and functions at peak burst power much longer than conventional Class-D amplifier designs to satisfy the requirements of even the most demanding program material.
- Features
- Type Amplifier
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
DAC for Hi-Fi audio: what is it and how to choose the right one?What is a DAC, why is it needed and what characteristics should be taken into account when choosing a device
All About Headphone Noise Canceling Technology: ANC, Talk Through, Ambient Aware and Adaptive Noise CancelingUnderstanding the intricacies of active noise cancellation in headphones
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
We recommendCompare using chart →
portable, DAC: Cirrus Logic, 384 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 300 мВт at 32 Ohm, 20 – 45000 Hz, signal/noise 108 dB
portable, DAC: ESS ES9069Q (2 pcs), 768 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 20 – 50000 Hz, signal/noise 126 dB
portable, DAC: Asahi Kasei AK4490, 382 kHz, 32 bit, headphone output: 8 – 300 Ohm, Jack 6.35 mm, 500 мВт at 32 Ohm, 20 – 20000 Hz, signal/noise 112 dB
Bluetooth-amplifier, portable, DAC: Burr-Brown DSD1793, 768 kHz, 32 bit, headphone output: 32 — 600 Ohm, mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 320 мВт at 32 Ohm, 40 мВт at 300 Ohm, signal/noise 116 dB
portable, DAC: CS43131, 384 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, 20 – 50000 Hz, signal/noise 122 dB
Bluetooth-amplifier, portable, DAC: AK4191EQ+AK4499EX, 768 kHz, 32 bit, headphone output: 8 — 350 Ohm, mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 1250 мВт at 32 Ohm, 170 мВт at 300 Ohm, 20 — 80000 Hz, signal/noise 123 dB
stationary, DAC: AK4493S, 384 kHz, 32 bit, headphone output: 16 – 300 Ohm, Jack 6.35 mm, Pentaconn 4.4 mm, 2440 мВт at 32 Ohm, 280 мВт at 300 Ohm, 20 – 20000 Hz, signal/noise 120 dB
Bluetooth-amplifier, portable, DAC: Cirrus Logic CS43131, 96 kHz, 24 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 165 мВт at 32 Ohm, 20 – 45000 Hz, signal/noise 117 dB
Bluetooth-amplifier, portable, DAC: 96 kHz, 24 bit, headphone output: 16 – 150 Ohm, mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB C, 220 мВт at 32 Ohm, 55 мВт at 300 Ohm, 20 – 40000 Hz, signal/noise 128 dB
Bluetooth-amplifier, stationary, DAC: ES9038PRO, 384 kHz, 32 bit, headphone output: 16 – 600 Ohm, Jack 6.35 mm, Pentaconn 4.4 mm, XLR, 2200 мВт at 32 Ohm, 281 мВт at 300 Ohm, 20 – 50000 Hz, signal/noise 129 dB
