OneUp EDC Lite Tool Green 1C0701GRN

The OneUp EDC Lite Tool contains a 9 function Multi-Tool featuring your most used essentials and has been designed to live inside your stem/steerer tube. Never get stuck without a Multi-Tool on a ride ever again!The OneUp EDC Lite Tool includes: Hex: 2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx & Flat Head Screwdriver.OneUp EDC Lite Tool FeaturesLightweight (Adds just 75g to your bike)VERY easy to install in less than 5 mins.Available in 6 colours (Black, Red, Blue, Green, Orange, Purple, Turq)No need to remove your star nut or thread your steerer tube.Colour matched to One Up Composite Pedals, Grips and Handlebar Decals.Run a single Multi-Tool on all your bikes (extra carriers sold seperately)ENSURE YOUR FORK IS COMPATIBLE - VERY IMPORTANTIncompatible forks: Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon SteerersSTEERER TUBE INNER DIAMETERThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If fitting unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.STEERER TUBE LENGTH Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.Fox except Fox 38 = 190mm (7.5") minFox 38 = 210mm (8.25") minRockShox Forks = 210mm (8.25") minMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.