When you make a purchase through links on our site, we may earn an affiliate commission.
StarTechcom 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - Dual Po
IMPROVE STORAGE CAPACITY: This 2-Port PCIe SATA and eSATA Controller Card enables support of two internal SATA or external (e... moreSATA) drives through PCI Express. A cost-effective solution to increase your system's storage capacity
ASM1061 CONTROLLER: This SATA and eSATA controller card features a dedicated chipset to enable two switchable SATA and eSATA 6Gbps ports via a single x1 PCIe slot. Supports FIS-based Port Multiplier, Command-based switching, NCQ, and ATA/ ATAPI commands
WIDE COMPATIBILITY: Supports Windows and standard SATA and eSATA SSDs (solid-state drives) and HDDs (hard drives). Supports SATA III (6 Gbps) and earlier revisions. Compliant with PCI Express 2.0
CONVENIENT SETUP: This 2-port SATA/eSATA controller card installs in a full or low-profile PCIe slot. Compatible with PCIe x1, x4, x8, or x16 slots. Includes full-profile (pre-installed) & low-profile brackets, and 7-pin SATA cable
THE IT PRO'S CHOICE: Designed and built for IT professionals, this 2-Port SATA and eSATA Controller Card is backed for 2 years, including free lifetime 24/5 multi-lingual technical assistance
StarTech.com 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - PEXESA
The PEXESAT322I PCI Express SATA III Controller Card (6 Gbps) gives you the option to add 2 internal or external SATA ports t... moreo your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed. The SATA III card features Port Multiplier (PM) support on each port, which allows multiple drives to be connected over a single cable when necessary to maximize the number of SATA device connections while reducing the amount of cabling required. The card is fully compliant with the SATA revision 3.0 specification (up to 6Gbps of data bandwidth), enabling you to utilize the speeds of high performance hard drives and Solid State Drives (SSD), as well as SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray). The PEXESAT322I SATA III Controller card is backed by our 2-year manufacturer warranty and free lifetime technical support. This PCIe SATA controller card has two SATA channels that can be independently switched between the internal or external (eSATA) ports as needed. This versatile add-in card offers SATA III connectivity (6Gbps), while remaining backward compatible with SATA I (1.5Gbps) and II (3Gbps) device connections, which helps eliminate the expense of having to upgrade drives. Includes both a full and low profile/half-height bracket for installation into any size of desktop computer. Upgrade an older PCIe-based system with SATA 6Gbps connectivity, to better utilize faster SATA drives. Add more internal SATA ports to a computer system, for connecting additional storage drives and/or optical drives. Add internal and/or external SATA III ports to a computer through a single PCI Express slot, with the option to change the available connections to external/internal, as needed based on updated system requirements or applications.
StarTech.com 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - 2 Int/
Add 2 external or internal SATA 6 Gbps ports to a computer, through a PCI Express slot. The PEXESAT322I PCI Express SATA III... moreController Card (6 Gbps) gives you the option to add 2 internal or external SATA ports to your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed. The SATA III card features Port Multiplier (PM) support on each port, which allows multiple drives to be connected over a single cable when necessary to maximize the number of SATA device connections while reducing the amount of cabling required. The card is fully compliant with the SATA revision 3.0 specification (up to 6 Gbps of data bandwidth), enabling you to utilize the speeds of high performance hard drives and Solid State Drives (SSD), as well as SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray).
Add 2 external or internal SATA 6 Gbps ports to a computer, through a PCI Express slot. The PEXESAT322I PCI Express SATA III... moreController Card (6 Gbps) gives you the option to add 2 internal or external SATA ports to your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed. The SATA III card features Port Multiplier (PM) support on each port, which allows multiple drives to be connected over a single cable when necessary to maximize the number of SATA device connections while reducing the amount of cabling required. The card is fully compliant with the SATA revision 3.0 specification (up to 6 Gbps of data bandwidth), enabling you to utilize the speeds of high performance hard drives and Solid State Drives (SSD), as well as SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray).
The PEXESAT322I PCI Express SATA III Controller Card (6 Gbps) gives you the option to add 2 internal or external SATA ports t... moreo your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed.- The SATA III card features Port Multiplier (PM) support on each port, which allows multiple drives to be connected over a single cable when necessary to maximize the number of SATA device connections while reducing the amount of cabling required.- The card is fully compliant with the SATA revision 3.0 specification (up to 6Gbps of data bandwidth), enabling you to utilize the speeds of high performance hard drives and Solid State Drives (SSD), as well as SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray).Features:- Two internal/external switchable SATA ports- Compliant with SATA revision 3.0, which can support up to 6Gbps of bandwidth- Support for SATA-based optical drives (CD/DVD/BD)- Uses existing SATA I/II cabling- Supports Native Command Queuing (NCQ) and ATA/ ATAPI commands- Port Multiplier FIS-based and Command-based switching supported- Compliant with PCI Express 2.0 standards- Includes Low Profile/Half-Height installation bracketApplications:- Upgrade an older PCIe-based system with SATA 6Gbps connectivity, to better utilize faster SATA drives- Add more internal SATA ports to a computer system, for connecting additional storage drives and/or optical drives- Add internal and/or external SATA III ports to a computer through a single PCI Express slot, with the option to change the available connections to external/internal, as needed based on updated system requirements or applications- This PCIe SATA controller card has two SATA channels that can be independently switched between the internal or external (eSATA) ports as needed.- This versatile add-in card offers SATA III connectivity (6Gbps), while remaining backward compatible with SATA I (1.5Gbps) and II (3Gbps) device connections, which helps eliminate the expense of having to upgrade drives- Includes both a full and low profile/half-height bracket for installation into any size of desktop computerSpecifications:- Height: 1.2 in [30 mm]- Length: 5.7 in [14.4 cm]- Weight: 5.4 oz [152 g]- Width: 6.8 in [17.3 cm]Connector(s):- 1 - Connector Type(s): PCI Express x1- 2 - Internal Ports: SATA (7 pin, Data)- 2 - External Ports: eSATA (7 pin, Data)Environmental:- Operating Temperature: 0°C to 50°C (32°F to 122°F)- Storage Temperature: -20°C to 60°C (-4°F to 140°F)- Humidity: 5% ~ 85% RHHardware:- Ports: 2- Interface: eSATA & SATA- Bus Type: PCI Express- Card Type: Standard Profile (LP bracket incl.)- Port Style: Integrated on Card- Chipset ID:ASMedia - ASM1061Performance:- Type and Rate: SATA III (6 Gbps)- Port Multiplier: Yes- Number of Ports That Support Port Multiplier: 2 (can use 2 PM at a time)- Number of Drives Supported Through Port
StarTech.com 2 Port PCI Express SATA 6 Gbps eSATA Controller Card - Dual P
Add 2 External Or Internal Sata 6 Gbps Ports To A Computer Through A Pci Express SlotThe Pexesat322i Pci Express Sata Iii Con... moretroller Card (6 Gbps) Gives You The Option To Add 2 Internal Or External Sata Ports To Your Computer Through A Single Pci Express (X1) Card Slot. The Card Features On Board Jumper Selection Which Enables You To Configure The Card To Provide 2 Internal Or External Sata Iii Ports Or One Of Each As Needed.The Sata Iii Card Features Port Multiplier (Pm) Support On Each Port Which Allows Multiple Drives To Be Connected Over A Single Cable When Necessary To Maximize The Number Of Sata Device Connections While Reducing The Amount Of Cabling Required.The Card Is Fully Compliant With The Sata Revision 3.0 Specification (Up To 6Gbps Of Data Bandwidth) Enabling You To Utilize The Speeds Of High Performance Hard Drives And Solid State Drives (Ssd) As Well As Sata-Based Optical Drives (Cd-Rom Dvd-Rom Blu-Ray).The Pexesat322i Sata Iii Controller Card Is Backed By Our 2-Year Manufacturer Warranty And Free Lifetime Technical Support.The Startech.Com Advantage- This Pcie Sata Controller Card Has Two Sata Channels That Can Be Independently Switched Between The Internal Or External (Esata) Ports As Needed- This Versatile Add-In Card Offers Sata Iii Connectivity (6Gbps) While Remaining Backward Compatible With Sata I (1.5Gbps) And Ii (3Gbps) Device Connections Which Helps Eliminate The Expense Of Having To Upgrade Drives- Includes Both A Full And Low Profile/Half-Height Bracket For Installation Into Any Size Of Desktop Computer
Add 2 external or internal SATA 6 Gbps ports to a computer, through a PCI Express slot. The PEXESAT322I PCI Express SATA III... moreController Card (6 Gbps) gives you the option to add 2 internal or external SATA ports to your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed.
The PEXESAT322I PCI Express SATA III Controller Card (6 Gbps) gives you the option to add 2 internal or external SATA ports to your computer, through a single PCI Express (x1) card slot. The card features on board jumper selection, which enables you to configure the card to provide 2 internal or external SATA III ports, or one of each, as needed.- The SATA III card features Port Multiplier (PM) support on each port, which allows multiple drives to be connected over a single cable when necessary to maximize the number of SATA device connections while reducing the amount of cabling required.- The card is fully compliant with the SATA revision 3.0 specification (up to 6Gbps of data bandwidth), enabling you to utilize the speeds of high performance hard drives and Solid State Drives (SSD), as well as SATA-based optical drives (CD-ROM, DVD-ROM, Blu-Ray).Features:- Two internal/external switchable SATA ports- Compliant with SATA revision 3.0, which can support up to 6Gbps of bandwidth- Support for SATA-based optical drives (CD/DVD/BD)- Uses existing SATA I/II cabling- Supports Native Command Queuing (NCQ) and ATA/ ATAPI commands- Port Multiplier FIS-based and Command-based switching supported- Compliant with PCI Express 2.0 standards- Includes Low Profile/Half-Height installation bracketApplications:- Upgrade an older PCIe-based system with SATA 6Gbps connectivity, to better utilize faster SATA drives- Add more internal SATA ports to a computer system, for connecting additional storage drives and/or optical drives- Add internal and/or external SATA III ports to a computer through a single PCI Express slot, with the option to change the available connections to external/internal, as needed based on updated system requirements or applications- This PCIe SATA controller card has two SATA channels that can be independently switched between the internal or external (eSATA) ports as needed.- This versatile add-in card offers SATA III connectivity (6Gbps), while remaining backward compatible with SATA I (1.5Gbps) and II (3Gbps) device connections, which helps eliminate the expense of having to upgrade drives- Includes both a full and low profile/half-height bracket for installation into any size of desktop computerSpecifications:- Height: 1.2 in [30 mm]- Length: 5.7 in [14.4 cm]- Weight: 5.4 oz [152 g]- Width: 6.8 in [17.3 cm]Connector(s):- 1 - Connector Type(s): PCI Express x1- 2 - Internal Ports: SATA (7 pin, Data)- 2 - External Ports: eSATA (7 pin, Data)Environmental:- Operating Temperature: 0°C to 50°C (32°F to 122°F)- Storage Temperature: -20°C to 60°C (-4°F to 140°F)- Humidity: 5% ~ 85% RHHardware:- Ports: 2- Interface: eSATA & SATA- Bus Type: PCI Express- Card Type: Standard Profile (LP bracket incl.)- Port Style: Integrated on Card- Chipset ID:ASMedia - ASM1061Performance:- Type and Rate: SATA III (6 Gbps)- Port Multiplier: Yes- Number of Ports That Support Port Multiplier: 2 (can use 2 PM at a time)- Number of Drives Supported Through Port
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
