Electro-Harmonix Effector Overdrive Hot Tubes nano [Domestic regular product]

[Product Infomation] Brand : ELECTRO-HARMONIX Materials : Alminium, Steel [Product Description] ・Hot Tube with CMOS specifications from the 1970s, but the circuit has been downsized as it was back then. - Choose from gentle and gentle sounds to punchy monster sounds. ・It is also possible to turn off the tone circuit ・True bypass Product introduction ■Product description The CMOS specification Hot Tube from the 1970s has been revived with the circuit still downsized. Volume and overdrive controls let you go from gentle and gentle to punchy and monster. You can shape your sound with the tone control and even turn off the tone circuit. ■Specifications ・Tone ON/OFF Switch ・True Bypass ・Dimensions: 72mm(W) x 110mm(D) x 50mm(H) ・Weight: 240g ・Power source: 9V battery or 9V DC center negative adapter JP9.6DC-200 (sold separately) *When using an adapter, be sure to use the genuine adapter JP9.6DC-200 (sold separately). Please note that if damage or malfunction occurs due to the use of an adapter made by another company, the product may not be covered by the warranty even if it is within the warranty period. This product is a product from a distributor in Japan. Please note that parallel import products cannot be guaranteed by an agency. Attention (Disclaimer) > Please read carefully When using an adapter, be sure to use the genuine adapter JP9.6DC-200 (sold separately). Please note that if damage or malfunction occurs due to the use of an adapter made by another company, the product may not be covered by the warranty even if it is within the warranty period. [Important Note - For Overseas Customers] Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas. 1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country. 2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions. [Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary. [Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product. [About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer. 3. Language and manual Product instructions and displays may only be in Japanese. The English version of