Crown Amplifier 300 Watt NCDI4X300-U-UK
 |
Buy Crown Amplifier 300 Watt NCDI4X300-U-UK
When you make a purchase through links on our site, we may receive a affiliate commission.
Amplifier 300 Watt NCDI4X300-U-UK | £1,905.80 |  | |||
Crown Extended Warranty to 6 Years
The CDi DriveCore Series is an evolution in amplification providing an impressive mix of high-performance; rich feature set and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series) the CDi DriveCore 4300BL offers streamlined functionality to work in almost any small/medium sized installation such as restaurants retail stores and more. Designed for ease-of-use in a variety of applications the 4300BL is a 4-channel amp that includes network control/monitoring high-level DSP front-panel interface and support for driving up to 100Vrms speaker loads without requiring a transformer. The 4300BL also comes with BLU link adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier reducing the variability of component values increasing reliability resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software the CDi DriveCore can be controlled configured and monitored through standard TCP/IQ network.
DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
• Input Router
• Input Delay – Up to 1000ms
• Input Parametric EQ – 8 band
• Crossover
• Output Parametric EQ – 8 band
• Output Delay – Up to 100ms
• LevelMAX™ Limiter
BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel fault-tolerant audio BUS BLU link
Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port – Recall presets mute channels monitor faults power on/off the amplifier and more through a combined GPIO/AUX Port.
- Features
- Power Output 300
- Weight 7.31 Kg
- Warranty 3 Years
The CDi DriveCore Series is an evolution in amplification providing an impressive mix of high-performance; rich feature set and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series) the CDi DriveCore 4300BL offers streamlined functionality to work in almost any small/medium sized installation such as restaurants retail stores and more. Designed for ease-of-use in a variety of applications the 4300BL is a 4-channel amp that includes network control/monitoring high-level DSP front-panel interface and support for driving up to 100Vrms speaker loads without requiring a transformer. The 4300BL also comes with BLU link adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier reducing the variability of component values increasing reliability resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software the CDi DriveCore can be controlled configured and monitored through standard TCP/IQ network.
DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
• Input Router
• Input Delay – Up to 1000ms
• Input Parametric EQ – 8 band
• Crossover
• Output Parametric EQ – 8 band
• Output Delay – Up to 100ms
• LevelMAX™ Limiter
BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel fault-tolerant audio BUS BLU link
Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port – Recall presets mute channels monitor faults power on/off the amplifier and more through a combined GPIO/AUX Port.
- Features
- Power Output 300
- Weight 7.31 Kg
- Warranty 3 Years
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
Best Inverter UPS Systems Up to 1000WOptimal UPS systems for backup and safe power supply of boilers, computers, and other sensitive equipment.
Best 16 GB DDR4 RAM KitsRAM kits for multitasking and gaming performance in previous-generation builds.
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
You may be interested in