Crown Amplifier 600 Watt NCDI4X600-U-UK
 | Compare prices 3 → When you make a purchase through links on our site, we may receive a affiliate commission.
|
Buy Crown Amplifier 600 Watt NCDI4X600-U-UK
When you make a purchase through links on our site, we may receive a affiliate commission.
CROWN CDi4600 | £2,566.08 |  | |||
Amplifier 600 Watt NCDI4X600-U-UK | £2,603.92 |  | |||
CROWN CDi4600 NCDI4X600-U-UK | £2,617.40 |  | |||
Crown Extended Warranty to 6 Years
The CDi DriveCore Series is an evolution in amplification providing an impressive mix of high-performance; rich feature set and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series) the CDi DriveCore 4600 offers streamlined functionality to work in almost any medium sized installation such as cinema houses of worship bars lounges and more. Designed for ease-of-use in a variety of applications the 4600 is a 4-channel amp that includes network control/monitoring high-level DSP front-panel interface and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
DriveCore™ Technology
Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier reducing the variability of component values increasing reliability resulting in
incredible audio fidelity from an efficient design.
Network Control and Monitoring
Through HARMAN’s HiQnet Audio Architect software the CDi DriveCore can be controlled configured and monitored through standard TCP/IQ network.
BLU link (BL models only)
Both receive and send channels over HARMAN’s 256 channel fault-tolerant audio BUS BLU link.
Direct Drive 70/100Vrms Output
Each output channel is capable of providing either 70V or 100V for high impedance applications.
Front-Panel Interface
Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port
Recall presets mute channels monitor faults power on/off the amplifier and more through a combined GPIO/AUX Port.
Pre-loaded Speaker Tunings
For quicker and easier setup and installation
DSP
On-board Digital Signal Processor in each amplifier allows for custom configuration and includes these integrated features:
• Input Router
• Input Delay - Up to 1000ms
• Input Parametric EQ - 8 band
• Crossover
• Output Parametric EQ - 8 band
• Output Delay - Up to 100ms
• LevelMAX™ Limiter
- Features
- Single/ Pair Single
- Power Output 600
- Weight 7.39 Kg
- Warranty 6 years warranty
The CDi DriveCore Series is an evolution in amplification providing an impressive mix of high-performance; rich feature set and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series) the CDi DriveCore 4600 offers streamlined functionality to work in almost any medium sized installation such as cinema houses of worship bars lounges and more. Designed for ease-of-use in a variety of applications the 4600 is a 4-channel amp that includes network control/monitoring high-level DSP front-panel interface and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
DriveCore™ Technology
Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier reducing the variability of component values increasing reliability resulting in
incredible audio fidelity from an efficient design.
Network Control and Monitoring
Through HARMAN’s HiQnet Audio Architect software the CDi DriveCore can be controlled configured and monitored through standard TCP/IQ network.
BLU link (BL models only)
Both receive and send channels over HARMAN’s 256 channel fault-tolerant audio BUS BLU link.
Direct Drive 70/100Vrms Output
Each output channel is capable of providing either 70V or 100V for high impedance applications.
Front-Panel Interface
Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port
Recall presets mute channels monitor faults power on/off the amplifier and more through a combined GPIO/AUX Port.
Pre-loaded Speaker Tunings
For quicker and easier setup and installation
DSP
On-board Digital Signal Processor in each amplifier allows for custom configuration and includes these integrated features:
• Input Router
• Input Delay - Up to 1000ms
• Input Parametric EQ - 8 band
• Crossover
• Output Parametric EQ - 8 band
• Output Delay - Up to 100ms
• LevelMAX™ Limiter
- Features
- Single/ Pair Single
- Power Output 600
- Weight 7.39 Kg
- Warranty 6 years warranty
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
Best Closed-Back On-Ear Headphones with Hybrid ConnectivityFull-size Bluetooth headphones with good noise isolation and wired connection.
Best Wired Over-Ear Headphones for AudiophilesHigh-quality over-ear headphones for home listening.
How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!
We recommendCompare using chart →
portable, DAC: ESS ES9069Q (2 pcs.), 768 kHz, 32 bit, headphone output: 8 – 300 Ohm, mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 1300 мВт at 32 Ohm, 250 мВт at 300 Ohm, 20 – 80000 Hz, signal/noise 126 dB
portable, DAC: Burr-Brown, 384 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 280 мВт at 32 Ohm, 20 – 45000 Hz
stationary, headphone output: mini-Jack 3.5 mm, Jack 6.35 mm, 20 – 20000 Hz, signal/noise 90 dB
Bluetooth-amplifier, portable, DAC: AKM AK4493SEQ (2 pcs), 768 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 840 мВт at 32 Ohm, 20 – 40000 Hz, signal/noise 118 dB
portable, DAC: ESS ES9069Q, 768 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 626 мВт at 32 Ohm, 20 – 40000 Hz, signal/noise 128 dB
portable, DAC: CS43131, 384 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, 20 – 50000 Hz, signal/noise 122 dB
portable, DAC: 768 kHz, 32 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 180 мВт at 32 Ohm, 20 – 40000 Hz, signal/noise 126 dB
portable, DAC: ESS Sabre ES9219, 384 kHz, 32 bit, headphone output: 32 – 300 Ohm, mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 100 мВт at 32 Ohm, 10 – 80000 Hz, signal/noise 125 dB
stationary, DAC: AK4493S, 384 kHz, 32 bit, headphone output: 16 – 300 Ohm, Jack 6.35 mm, Pentaconn 4.4 mm, 2440 мВт at 32 Ohm, 280 мВт at 300 Ohm, 20 – 20000 Hz, signal/noise 120 dB
Bluetooth-amplifier, portable, DAC: Cirrus Logic CS43131, 96 kHz, 24 bit, headphone output: mini-Jack 3.5 mm, Pentaconn 4.4 mm, input USB-C, 165 мВт at 32 Ohm, 20 – 45000 Hz, signal/noise 117 dB