Burgtec Offset Shock Hardware 7066

TheBurgtec Offset Shock Hardwareallows the head angle to be easily manipulated simply by shortening or lengthening the effective eye to eye of the shock. The Burgtec hardware allows between 1 and 1.5 degrees of angle alteration depending on the shock bolt size of your frame. 6mm frames will naturally get the greatest amount of alteration with the 8mm frames getting 1 degree. In recent times as the trend leans towards steeper and faster tracks the bushes have been used to relax the head angle. This makes the bike feel more stable at speed and even more planted on steep sections by throwing the front wheel further forward. The bushes can be used in the opposite way to steepen the head angle to improve the bikes geometry for sprinting if the track is more pedalling orientated. This pitches the rider more to the front of the cockpit and more on top of the bars which is better for sprinting. The hardware is made from grade 5 Titanium. Which is significantly lighter than its steel hardware counterpart but still maintaining the same excellent wear rating when compared to OE Aluminum ones; Approximately 3 times. The hardware comes supplied with a proprietary o-ring seal to keep out as much of the elements as possible. As well as DU bushes.