When you make a purchase through links on our site, we may receive a affiliate commission.
APC NetShelter Rack Automatic Transfer Rack-mountable Managed Switch AP4423A
. APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches off... moreering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability agility and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI SNMP CLI and are fully compatible with EcoStruxure IT..
APC NetShelter Rack Automatic Transfer Rack-mountable Managed Switch Black AP4423A
. APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches off... moreering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability agility and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI SNMP CLI and are fully compatible with EcoStruxure IT..
APC Automatic Transfer Switch AP4423A - (8x) C13 + (1x) C19. 3680W. Ra
APC Automatic Transfer Switch AP4423A - (8x) C13 + (1x) C19. 3680W. Rack mountable. 1U Increase availabilityAn APC Rack Autom... moreatic Transfer Switch makes it possible to connect single-powered hardware to two different power sources. in order to increase the availability of this connected hardware and prevent costly downtime. Because an APC Rack ATS uses two input power cords (not included). it can be connected to two different power sources at the same time. By then connecting single-powered hardware to the Rack ATS. this hardware can have access to 2 separate power sources. If one source fails. the Rack ATS immediately switches to the second feed. without the connected hardware being affected.Easy to useYou can read the status of the APC Rack ATS at a glance via the front panel interface. but you can also manage it remotely thanks to its built-in network management functionality.ConvenienceBecause this Rack ATS is equipped with multiple outputs. multiple single-powered devices can be connected to the ATS at the same time. so that all benefit from the security of two feeds.SafetyThe built-in intelligent interface allows this APC rack ATS to monitor both input power sources. detect deviations in voltage or frequency and then take a user-defined action. such as sending an alarm or switching.AccessoriesConnect the APC ATS using 2x the AP9875. (C19-Schuko). AP9876 (C19-IEC309 16A) or AP9877 (C19-C20) and provide the ATS with a temperature and humidity sensor (AP9335TH). You can prevent loose power cords with a retention bracket the AP7769.Warranty extensionThe factory warranty of this APC Rackmount Automatic Transfer Switch is 2 years and can be extended to 3 years using WBEXTWAR1YR-AC-03.FeaturesAPC Rack Automatic Transfer Switch AP4423AInput: 230V. input connection type: C20 (2x)Output 230V. output connection type: C13 (8x) + C19 (1x)Max power: 3680WattIncludes: Rack mounting brackets. Serial Communication cable - RJ12 to female DB-9APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability. agility. and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current. 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13. 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing. environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI. SNMP. CLI and are fully compatible with EcoStruxure IT.
Increase availabilityAn APC Rack Automatic Transfer Switch makes it possible to connect single-powered hardware to two differ... moreent power sources. in order to increase the availability of this connected hardware and prevent costly downtime. Because an APC Rack ATS uses two input power cords (not included). it can be connected to two different power sources at the same time. By then connecting single-powered hardware to the Rack ATS. this hardware can have access to 2 separate power sources. If one source fails. the Rack ATS immediately switches to the second feed. without the connected hardware being affected.Easy to useYou can read the status of the APC Rack ATS at a glance via the front panel interface. but you can also manage it remotely thanks to its built-in network management functionality.ConvenienceBecause this Rack ATS is equipped with multiple outputs. multiple single-powered devices can be connected to the ATS at the same time. so that all benefit from the security of two feeds.SafetyThe built-in intelligent interface allows this APC rack ATS to monitor both input power sources. detect deviations in voltage or frequency and then take a user-defined action. such as sending an alarm or switching.AccessoriesConnect the APC ATS using 2x the AP9875. (C19-Schuko). AP9876 (C19-IEC309 16A) or AP9877 (C19-C20) and provide the ATS with a temperature and humidity sensor (AP9335TH). You can prevent loose power cords with a retention bracket the AP7769.Warranty extensionThe factory warranty of this APC Rackmount Automatic Transfer Switch is 2 years and can be extended to 3 years using WBEXTWAR1YR-AC-03.FeaturesAPC Rack Automatic Transfer Switch AP4423AInput: 230V. input connection type: C20 (2x)Output 230V. output connection type: C13 (8x) + C19 (1x)Max power: 3680WattIncludes: Rack mounting brackets. Serial Communication cable - RJ12 to female DB-9APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability. agility. and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current. 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13. 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing. environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI. SNMP. CLI and are fully compatible with EcoStruxure IT. APC Automatic Transfer Switch AP4423A - (8x) C13 + (1x) C19. 3680W. Rack mountable. 1U
Increase availability
An APC Rack Automatic Transfer Switch makes it possible to connect single-powered hardware to two diff... moreerent power sources in order to increase the availability of this connected hardware and prevent costly downtime. Because an APC Rack ATS uses two input power cords (not included) it can be connected to two different power sources at the same time. By then connecting single-powered hardware to the Rack ATS this hardware can have access to 2 separate power sources. If one source fails the Rack ATS immediately switches to the second feed without the connected hardware being affected.
Easy to use
You can read the status of the APC Rack ATS at a glance via the front panel interface but you can also manage it remotely thanks to its built-in network management functionality.
Convenience
Because this Rack ATS is equipped with multiple outputs multiple single-powered devices can be connected to the ATS at the same time so that all benefit from the security of two feeds.
Safety
The built-in intelligent interface allows this APC rack ATS to monitor both input power sources detect deviations in voltage or frequency and then take a user-defined action such as sending an alarm or switching.
Accessories
Connect the APC ATS using 2x the AP9875 (C19-Schuko) AP9876 (C19-IEC309 16A) or AP9877 (C19-C20) and provide the ATS with a temperature and humidity sensor (AP9335TH). You can prevent loose power cords with a retention bracket the AP7769.
Warranty extension
The factory warranty of this APC Rackmount Automatic Transfer Switch is 2 years and can be extended to 3 years using WBEXTWAR1YR-AC-03.
Features
APC Rack Automatic Transfer Switch AP4423A
Input: 230V input connection type: C20 (2x)
Output 230V output connection type: C13 (8x) + C19 (1x)
Max power: 3680Watt
Includes: Rack mounting brackets Serial Communication cable - RJ12 to female DB-9
APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability agility and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI SNMP CLI and are fully compatible with EcoStruxure IT.
APC Rack ATS AP4423A | 16A 230V Redundant Power for ServersEnsure maximum uptime and business continuity for your critical se... morerver and networking equipment with the APC Rack Automatic Transfer Switch (ATS) AP4423A. Designed for high-availability IT environments, this intelligent 1U rack-mountable power strip delivers reliable, redundant power to single-corded devices. By providing a seamless and automatic transfer of power from a primary source to a secondary one in the event of a failure, the AP4423A safeguards your operations against unexpected downtime, making it an essential component for any modern data center, server room, or network closet.This Rack ATS is engineered to draw power from two independent sources. If the primary source becomes unavailable or falls out of the selected range, the unit will instantaneously switch to the secondary power source without interrupting the connected loads. This failover is completely transparent to the equipment, ensuring continuous operation for your most vital systems. Its robust design and advanced feature set offer peace of mind and simplified power management for demanding IT infrastructure.EU Plug.If you´re passionate about.IT and electronics.like being up to date on technology and don´t miss even the slightest details, buy.Wall-mounted Rack Cabinet APC AP4423A.at an unbeatable price.Type:Tower.C13.Colour:Black.Connections:AC x 9.Chassis assembly:1U.Key Benefits* Enhanced Reliability and Availability: Delivers power redundancy to single-corded IT equipment. By connecting to two independent power sources, it ensures your servers, switches, and storage devices remain operational even if one power feed fails, dramatically increasing system uptime.* Seamless Power Transfer: The automatic transfer from one source to another is instantaneous (typically 8-12ms), which is well within the industry-standard hold-up time for most IT equipment, guaranteeing no interruption to the connected loads.* Comprehensive Network Management: Equipped with a built-in network interface, the Rack ATS allows for remote management via Web, SNMP, and Telnet. This enables IT administrators to monitor power consumption, configure alerts for potential issues, and manage the device from anywhere, reducing the need for physical intervention.* Clear Status Indication: On-device LEDs and a digital display provide a clear, at-a-glance view of the power status, including which source is active and the current load, allowing for quick diagnostics and simplified troubleshooting directly at the rack.Main Features* Provides redundant rack-mount power to single-corded equipment* Dual Input Power Sources for A/B feed redundancy* Automatic and seamless transfer of load from primary to secondary source* Built-in network connectivity for remote management (Web, SNMP, Telnet)* Current monitoring and alarms for proactive load management* Firmware upgradeable via network connection* Informative LCD display for status updates and metering* Slim,
APC Rack ATS AP4423A | 16A 230V Redundant Power for ServersEnsure maximum uptime and business continuity for your critical server and networking equipment with the APC Rack Automatic Transfer Switch (ATS) AP4423A. Designed for high-availability IT environments, this intelligent 1U rack-mountable power strip delivers reliable, redundant power to single-corded devices. By providing a seamless and automatic transfer of power from a primary source to a secondary one in the event of a failure, the AP4423A safeguards your operations against unexpected downtime, making it an essential component for any modern data center, server room, or network closet.This Rack ATS is engineered to draw power from two independent sources. If the primary source becomes unavailable or falls out of the selected range, the unit will instantaneously switch to the secondary power source without interrupting the connected loads. This failover is completely transparent to the equipment, ensuring continuous operation for your most vital systems. Its robust design and advanced feature set offer peace of mind and simplified power management for demanding IT infrastructure.EU Plug.If you´re passionate about.IT and electronics.like being up to date on technology and don´t miss even the slightest details, buy.Wall-mounted Rack Cabinet APC AP4423A.at an unbeatable price.Type:Tower.C13.Colour:Black.Connections:AC x 9.Chassis assembly:1U.Key Benefits* Enhanced Reliability and Availability: Delivers power redundancy to single-corded IT equipment. By connecting to two independent power sources, it ensures your servers, switches, and storage devices remain operational even if one power feed fails, dramatically increasing system uptime.* Seamless Power Transfer: The automatic transfer from one source to another is instantaneous (typically 8-12ms), which is well within the industry-standard hold-up time for most IT equipment, guaranteeing no interruption to the connected loads.* Comprehensive Network Management: Equipped with a built-in network interface, the Rack ATS allows for remote management via Web, SNMP, and Telnet. This enables IT administrators to monitor power consumption, configure alerts for potential issues, and manage the device from anywhere, reducing the need for physical intervention.* Clear Status Indication: On-device LEDs and a digital display provide a clear, at-a-glance view of the power status, including which source is active and the current load, allowing for quick diagnostics and simplified troubleshooting directly at the rack.Main Features* Provides redundant rack-mount power to single-corded equipment* Dual Input Power Sources for A/B feed redundancy* Automatic and seamless transfer of load from primary to secondary source* Built-in network connectivity for remote management (Web, SNMP, Telnet)* Current monitoring and alarms for proactive load management* Firmware upgradeable via network connection* Informative LCD display for status updates and metering* Slim,
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
