Cisco CP-PWR-CORD-CE=

EU Plug.The cisco unified ip phone power injector is a midspan power injector designed and tested for use with cisco unified ip phones.the cisco unified ip phone power injector sits between a switch port and the cisco unified ip phone, providing inline power capability to an unpowered switch port.it supports cisco midspan power, ieee 802.3af modes for supplying power to the attached phone, and 10/100/1000base-t ethernet connections.figure 2 shows the maximum distance of the cisco unified ip phone power injector between a cisco unified ip phone and an ethernet switch.Features:The Cisco Unified IP Phone Power Injector offers several features, including:- A desktop and desk-area single-port midspan injector with integrated power.- 802.3af/IEEE Power over Ethernet (PoE) support.- Gigabit Ethernet support.- Full enterprise-level compliance.- Designed and tested for use with Cisco Unified IP Phones.Specifications:- Dimensions (H x W x D):1.6 x 4.6 x 5.45 in.(4.1 x 11.8 x 13.8 cm).- Weight:66 lb (.30 kg).- Phone casing composition:Polycarbonate acrylonitrile butadiene styerene (ABS) plastic in textured dark gray color.- Power requirements:Power is integrated (see Table 5 for country-specific power cords used for connection to AC wall outlet).- Part number:CP-PWR-INJ Lan connection:- Maximum Ethernet cable length:100 m from switch to device.- Type:RJ-45.- Label:DATA -Network Device connection:- Maximum Ethernet cable length:100 m from switch to device.- Type:RJ-45.- Label:data and pwr -phone.- Leds:two-´´power´´ and ´´status´´.- Stackable:yes-two injectors can be stacked.- Wired pairs used:injects power into two unused pairs in the ethernet cable:4 and 5 (negative) and 7 and 8 (positive) Electrical:Input:- AC input voltage range:90 to 264 VAC.- AC input current:0.5A (RMS) 90 VAC at maximum load.- AC input frequency:47 to 63 Hz.- Maximum inrush current:20A 115 VAC, 60 Hz, Cold Start, 25°C 40A 230 VAC, 50 Hz, Cold Start, 25°C Output:- DC output voltage:48 VDC nominal.- Maximum output.Power:15.5W 48 VDC Performance efficiency:- 53% minimum at 30-49% of maximum load and 120 VAC, 60 Hz.- 75% minimum at 50-100% of maximum load and 120 VAC, 60 Hz Temperature:- Table 2 gives temperature ratings for the Cisco Unified IP Phone Power Injector.- Operating temperature:32 to 104°F (0 to 40°C).- Relative humidity:10 to 95% (noncondensing).- Storage temperature:14 to 140°F (-10 to 60°C) Certifications:- Table 3 gives certifications for the Cisco Unified IP Phone Power Injector.- Certification Description:Regulatory compliance:- CE marking Safety:- Underwriters Laboratories (UL) 60950.- Canadian Standards Association (CSA) C22.2 No.60950.- IEC 60950.- EN 60950.- AS/NZS 60950 Electromagnetic compatibility (EMC):- Federal Communications Commission (FCC) Part 15 (CFR 47) Class B.- ICES-003 Class B.- EN55022 Class B.- CISPR22 Class B.- AS/NZ 3548 Class B.- VCCI Class B.- EN55024.- EN 50082-1.- EN 61000-3-2.- EN 61000-3-3.- CISPR24.- EN61000-6-1.