Soda Maker Machine Homemade Soda Fizzy Water Machine Manual Sparkling Water Machine L

Feature: 1. Homemade Carbonated Beverages: Using this sparkling water machine, you can make various flavors of carbonated beverages, which are free to match and more healthy and save money. 2. Multifunctional Design: In addition to making fizzy drinks, it can also make a variety of drinks such as juice, beverages, iced tea and coffee. 3. Convenience: Easy to make by simply putting the right amount of CO2 in the water, eliminating the need to buy bottled drinks. 4. Environmental Protection and Energy Saving: The use of carbon dioxide instead of bottled drinks has environmental protection and energy saving effects and reduces packaging waste. 5. Easy to Clean: Disassembled design, easy to clean, built in washable bottle and filter is more convenient and hygienic to use. Specification: Item Type: Soda Maker Weight: 496g / 17.50oz Product Material: PET Product Size: Approx. 38x8.5cm / 15.0x3.3in How to Use: 1. For the first time use, please follow the cleaning instructions to do the basic cleaning. Add cold water to the bottle the full water line marked. 2. Put the bubble nozzle tube into the bottle and bolt it firmly until it is completely tight. 3. Insert the CO? filling cylinder into the slot of the starter body, making sure that the CO? filling cylinder is firmly embedded in place. 4. Place the starter body over the bubble nozzle tube, and start the body and bubble nozzle tube in clockwise direction. Nozzle tube tightly, and place the bottle on a vertical and stable plane. 5. Continue to tighten the starter body and bubble nozzle tube in a clockwise direction until the CO? filled cylinder is punctured. Gas release into the bottle can be seen and a hissing sound can be heard as well as a small amount of excess CO? released through the safety relief valve of the bubble nozzle tube, which is a normal phenomenon in the bubbling process. It takes at least 30 seconds to complete the bubbling process. 6. Shake the bottle for 5 seconds until the bubbling process is completed at the bottom of the street. 7. Slowly twist open the main body of the starter, press the item end of the cast button, you can exit the cylinder. 8. Slowly twist open the bubble nozzle tube, and then you can enjoy the sparkling water. Once the bottle is opened, the bottle must be sealed with the original cap. If you repeat making sparkling water in a short time, please rinse the nozzle tube under warm water for at least 30 seconds. 9. It is recommended to add series flavored syrup to your sparkling water, so that it will be more refreshing, better taste and better flavor. 10. It is recommended to use the cap provided by the original manufacturer and bolt it tightly on the dry bottle. It can maintain the pressure inside the bottle and avoid the loss of bubbles in the liquid.. Package List: 1 x Soda Maker1 x Gasket1 x Lid Note: Products without cylinders, cylinders need to buy their own.