Automatic G3/4 Female Thread Programmable LCD Display Digital Irrigation Water Timer

Feature: 1. Programmable: Watering timer can be set to be on for a maximum of 599 minutes at intervals of 1 to 30 days. And 8 timing control programs can be set. Support smart on, with unlimited duration of temporary on function. 2. Large Display And Waterproof: The automatic watering timer adopts a large LCD display, which is convenient to view the set data. The battery compartment has a waterproof gasket design, plus a switch buckle to fix the battery compartment for reinforcement. 3. Filter And Rain Sensor Design: The threaded connector to the faucet has a filter design, which is easy to use without clogging and makes the controller last longer. When the rain sensor is triggered, it automatically stops the current task, easy to use. 4. Two Kinds of Thread Interface: This watering controller itself G3/4 female thread is also equipped with G1/2 adapter, easy to connect the use of two thread caliber faucets. 5. Easy To Install: No tools required, just install the irrigation water timer on the faucet, easy to use and simple to operate. No need to worry about your plants, lawn, garden or farmland when you are on a business trip, weekend vacation or visiting friends or relatives. Specification: Item Type: Watering Timer Material: ABS Product Size: Approx. 150 x 92 x 47mm / 5.9 x 3.6 x 1.9in Gross Weight: Approx. 318g/11.2oz Controller Thread: Female G3/4 Adapter Thread: G3/4 Male Thread to G1/2 Female Thread Use: Cooling, watering, landscaping. This product is suitable for courtyard, balcony, home green wall, three dimensional greening micro sprinkler, drip pipe, seepage irrigation automatic control products. 1. Battery (without battery delivery): Use 2 AA alkaline dry batteries. 2. 8 timer control programs can be set. 3. Can set the maximum opening time 599 minutes, interval 1 to 30 days. 4. Use large LCD display. 5. With unlimited duration of the temporary open function. Remarks: Suitable for water pressure 1-8kg, flow rate 500-1700L/H, suitable for water temperature 1-50 celsius . Setting Steps: 1. For initial setup, press the Menu Off key to enter the Current Time setting. Use the UP or DOWN key to set the hour, press OK, then use the UP or DOWN key to set the minutes. Press OK again to confirm and finish setting. 2. Automatically enter the Watering Start setting. Use the UP or DOWN key to set the hour, press OK Set, then use the UP or DOWN key to set the minutes. Press OK Set again to confirm and finish setting. 3. Automatically enter the Watering Duration setting. Set the watering time from 1 second to 599 minutes (maximum 9 hours 59 minutes) using the UP or DOWN key. Press OK to confirm the setting. 4. Automatically enter the Interval Days setting. Set the watering frequency from 1 day to 30 days using the UP or DOWN key. Press OK to confirm the setting. 5. For manual watering, press Manual, then use the UP or DOWN key to set the watering duration. Press OK to confirm. To stop manual watering, press Menu Off to switch back to automatic mode.