Pig Ovulation Detector Estrus Detector Analyzer Digital Display Estrus Tester for Livestock

Feature: 1. Convenient cleaning, waterproof setting, safety guarantee, scientific breeding, high litter rate. 2. Animal estrus and ovulation tester, grasp the accurate breeding timing, and improve economic benefits. 3. Large screen automatically displays the numbers, the data is accurate, and the numbers are intuitive. 4. The arc probe is smooth, and the size is customized according to the characteristics of the animal, reducing the interference to the animal during pregnancy. 5. Waterproof switch button is protected by a rubber sleeve and is easy to use. It is located under the handle. Removable battery, hanging hole design, user?friendly. Specification: Item Type: Estrus Detector Product Size: Approx. 30.5x10.5x7.5cm / 12.0x4.1x3.0in Panel Width: Approx. 7cm / 2.8in Material: Polyethylene Weight: Approx. 743g / 26.2oz Working Temperature: 0-50 celsius Maximum Humidity: 85percent Measuring Range: 10-1990 Test Method: fully automatic one-time test Test Speed: within 3 seconds Display: LCD screen Purpose: pig breeding equipment Product Use: Detect the time of estrus and mating of pigs, waterproof the whole body, and increase litter size Battery: 1 x 9V high-performance carbon battery, 6F22 model (battery not included) Note: Another function of the LCD screen is to read the remaining power of the battery. When Lobat appears on the screen, it means that the instrument is out of power and the battery needs to be replaced. Battery Replacement Method: 1. Unscrew the screw at the bottom of the handle; 2.Remove the battery from the handle and release the battery from the battery clamp 3. Replace with a new battery and put it back in the handle; 4. Fasten the battery cover and tighten the screws. Cleaning: 1. Clean the analyzer before and after use. 2. Careful and thorough cleaning can ensure the correct use of the instrument. It is recommended that you take a cotton cloth or towel and wet it with detergent, wipe the probe and probe repeatedly, and then rinse with clean water. Do not wipe dry after rinsing, because water The beads will not affect the test results, but the probe will cause a second contamination during the drying process. In addition, it must be re-cleaned using the manual cleaning method at that time, otherwise it will affect the data and the service life of the equipment. 3. Before measuring each female animal, you must repeat the above operations to clean the instrument, not only to get the best and accurate data, but also to avoid cross-infection between the mothers. 4. After each use, please clean the ovulation meter and put it back in the carton. Data Judgment: 1. The number of pigs that are not in heat is above 450. 2. After the estrus, the value begins to decrease, the lowest value drops to about 250-, and it will last for about 20 hours at the low value, and then rises. When the data rises about 400, the first time is matched, and the second time is 6-8 hours apart. (At this time, the data is above 450). 3. The data will