Konnwei Bottom Suction Pump Ultra Quiet Energy Saving Dry Burning Protection Bottom Suction Fountain Pump

Feature: 1. [Dry Burning Protection] The water pump is equipped with a thermal protector. When the motor overheats due to abnormal operation, the submersible pump will automatically stop and stop working, and restart after the temperature drops. 2. [Filter Design] The bottom suction filter design of the submersible pump, the water inlet is close to the bottom of the container, the water is pumped down to 0.5 inches, and the water is surrounded by 360 degrees. 3. [Water Pump Material] The water pump aquarium is made of environmentally friendly ABS material, which is resistant to high temperature and wear and can effectively prevent leakage. 4. [Pure Copper Material] The motor is made of pure copper material, which is more durable, more stable, more energy saving, safe and ultra quiet, providing you with a quiet environment. 5. [High Performance] The power of the fish tank water pump is 100W, the rated voltage is 110?120V/60HZ, the maximum flux is 4500L/H, and the head is 4.5m, which can be widely used in circulating water. Specification: Item Type: Aquarium Bottom Suction Submersible Pump Model: YQ-4500 Material: ABS US Plug 110-120V Parameter: Power: 100W Rated Voltage: 110-120V/60Hz Maximum Flux: 4500L/H Head: Approx. 4.5m/14.8ft. Package List: 1 x Submersible Pump1 x Manual3 x Water Outlet4 x Fixed Suction Cup Note: 1. Make sure that the mains voltage and frequency used are the same as those indicated on the pump nameplate.2. Please use a hand when moving the water pump. Do not lift the water pump with a hand?held cable, so as not to cause the water pump to be disconnected and unable to be powered on.3. The idling of the pump without water will cause the motor to become hot, affect the service life of the pump, or even burn out the motor and the pump cannot be used.4. In case of failure, it is necessary to cut off the power supply before overhauling.5. If the operating environment is harsh, pay attention to regularly cleaning the shaft core and the water filter cover.6. When disassembling, due to the strong magnetism of the magnetic rotor, pay attention to safety when installing it, and wear gloves to prevent it from getting on your fingers.7. When it shuts down automatically, we d better cut off the power and check, which can increase its lifespan.