Wind Speed Sensor Professional High Accuracy 3 Cups Wind Speed Sensor Anemometer for Industry

Feature: 1. PREMIUM MATERIAL: The wind cup of 3 cups wind speed sensor anemometer is made of ABS material, high strength, small startup wind speed, excellent anti erosion performance. 2. ANTI INTERFERENCE: Wind speed meter sensor has strong lightning interference ability, suitable for a variety of harsh environments, strong wind resistance. 3. LIGHTWEIGHT AND PORTABLE, EXTENSION CABLE: The wind speed sensor anemometer is small and lightweight, easy to carry and assemble. Equipped with an extension cable, the length of the extension cable at the connection is 0.8 meters. 4. TWO WIRE OUTPUT METHODS: The professional wind speed sensor anemometer is compatible with two wire outlet methods, bottom outlet and side outlet. 5. APPLICATIONS: Wind speed sensor can be used for wind speed measurement in greenhouse, environmental guard, weather observatory, ships, wharf, aquaculture, advertising gates, meteorology, ocean, environment, airport, harbor, laboratory, industry, agriculture and transportation environment. Specification: Item Type: Wind Speed Sensor Material: ABS Size: Approx. 158x180x70mm / 6.22x7.09x2.76in Weight: Approx. 272g/9.6oz Power Supply Voltage: DC9-30V Telecommunication Type: for RS485 (Default for Modbus Protocol) Measuring Range: 0~70m/s (Pulse, 485, 232 Output) Extension Line Length at Connection: Approx. 0.8m/2.6ft Accuracy: +/- (0.5 + 0.02V) m / s (V Represents the Real Time Wind Speed Value) Resolution: 0.1m/s Starting Wind Speed: less than 0.8m/s Maximum Power Consumption: 0.48W Load Capacity: DC12V Power Supply, Current Type Output Impedance less than 350 Ohm DC24V Power Supply, Current Type Output Impedance less than 900 Ohm , Voltage Type Output Impedance more than 1K Ohm Operating Environment: Temperature -35 celsius ~60 celsius , Humidity less than 100 Percent RH Without Condensation Protection Grade: IP64 Widely Used In: Greenhouse, Eco Friendly, Weather observatory, Ships, Docks, Breeding, Advertising Gates, Meteorology, Marine, Environment, Airports, Ports, Laboratories, Agriculture and Transportation and Other Environments of the Wind Speed Measurement. About the sensor telecommunication protocol description : First, if you are using a single sensor connected to the computer to read data directly, it is recommended to use the company s private protocol (see page 3), you can visualize the data in ASCII code (hex send, non hex receive); Second, if you are a multi sensor interconnection with PLC, configuration or programmable collector, it is recommended to use the standard for ModBus RTU protocol. Third, If there is no special requirement, the default device address in the sensor parameters is 1, baud rate = 9600, protocol for ModBus RTU. Standard for ModBus RTU telecommunication protocols :) Serial Format Data bit 8 bits, stop bit 1 bit, parity bit None, default baud rate 9600bps, serial debugging software set to hex send and receive, two telecommunication intervals of at least 500ms or more, CRC in the manual