Fiend Cab Front Hub Guards Black 34100

Replacement press fit plastic hub guards for Fiend cab front hub cone spacers. Sold as a pair.

Expansion tank with 230 milliliter capacity from aqua computer. The reservoir comes with a D5-NEXT pump and is made of resistant borosilicate glass. With the universal mounting bracket, the reservoir can be mounted vertically and horizontally.The features of the ULTITUBE D5 100 PRO reservoir with D5-NEXT pump at a glance:- Expansion tank from aqua... morecomputer with 230 ml capacity- D5-NEXT pump included- Made of resistant borosilicate glass and acetal- Removable stainless steel filter in the base- Integrated pressure compensation membrane in the lid- RGB LED lighting through RGBpx ring- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 100 PRO reservoir with D5-NEXT pump in detailThe ULTITUBE D5 100 PRO reservoir from aqua computer is equipped with a tube made of borosilicate glass . In contrast to commonly used plexiglass, borosilicate glass has a very high hardness and scratch resistance . In addition, it has excellent chemical and thermal resistance and expands very little when exposed to heat.Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum , which do not come into contact with the cooling medium. Thanks to the clever design, there is no need for inner struts or additional pipes. The lid and the base of the ULTITUBE 100 D5 are made of resistant acetal and are screwed to the aluminum rings and the tube.The glass tube has a wall thickness of 5 mm and an outer diameter of 65 mm. A filter made of stainless steel wire mesh is integrated in the base of the AGB . The filter retains particles and eliminates annoying air bubbles. The filter element is easily removable and can be cleaned under running water.A digitally addressable RGB LED lighting is includedincluded in the form of an LED ring with 13 RGB LEDs. The RGBpx ring can be easily slid over the container and illuminates the terms and conditions and the coolant. The silicone manufacturing diffusely breaks the LED light and minimizes unsightly LED spots. The RGBpx ring has an input and an output, which means that several LED rings can be connected to form a chain.The seal in the lid of the expansion tank is designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. In addition, an almost invisible pressure compensation membrane is integrated in the cover , which continuously compensates for pressure fluctuations caused by temperature changes without coolant being able to escape.An aqua computer D5-NEXT pump is already installed on the bottom of the ULTITUBE D5 100 PRO . The pump has an OLED display and numerous control and setting functions. The pump is attached to the bottom of the expansion tank via an aluminum ring. The terms and conditions can be mounted on a side or rear wall, as well as standing. Appropriate brackets and matching fastening material as well as four soft rubber decouplers are included in the scope of delivery. Attention: It is