Jovno Diamond Precision Carbide Hobby Electroplated Plastic Model Polishing of Hard Soft Thin Edge Surface Gate Processing F

[Knife-shaped file with 9 replacement blades] Triangular diamond blades with a taper of 23° and a taper of 45° have one count each of #200, #400, and #600. Each of the two types of round files has a #400 count. In addition, one design knife blade is included, totaling 9 pieces. With a wide variety of file types, it can easily be used in a variety of situations. 【Professional Specification】Compared with traditional deburring tools, this file adopts professional electroplating technology, which provides uniform abrasive grain, good wear resistance, and long-lasting cutting power. Since you can sharpen at the tip of the blade, you can easily perform detailed polishing work in deep places that are difficult to reach with sandpaper. [Easy to use] The file has the same shape as the design knife that you are used to using, so it is easy to use and can be used for polishing in narrow and deep places. Even beginners can easily perform polishing work. 1 file holder, collet size for 2.35mm shaft (approximate): 2.1~2.5mm shaft. [Product Features] 1. The blade is ultra-thin carbide with a thickness of 0.4 mm, allowing it to smoothly penetrate into the crevices of fine molded products that are difficult to reach. 2. Since there is no file pattern (polishing direction), you can move it freely like sandpaper when polishing. 3. There are abrasive grains on both sides of the blade, so you can use it without worrying about the front and back sides! 4. The blade is sharp and can cut just at the very edge. [Product use] This design knife-shaped file is a tool that can easily file the creases and gaps that are difficult to use with traditional files. It can also be used for delicate texture processing, groove correction after streaks, finishing surface treatment, and detailed polishing of models and figures. It is also easy to correct curved surfaces and grooved parts. It also supports deburring and chamfering of hard plastics, aluminum, brass, copper, etc. Product Name: Design Knife-shaped Diamond File Product Features  1. Ultra-thin 0.4mm thick, micro-knife-shaped electrodeposited diamond file  2. No file marks (fixed polishing direction) and can be polished freely in any direction Yes 3. Three types of thread count: #200, #400, and #600, which can be used depending on the purpose 4. Fine-grained diamond abrasive grains provide a uniform cutting surface 5.Professional electrodeposition technology reduces shedding and provides a long-lasting cutting feel 6.Can be used on both the front and back of the file.Applications: Models, etc. Figure detail processing, modeling, plastic processing, precision processing, detail finishing, etc. Package contents:  File body holder *1 9 blades (9 types of replacement blades included)  Case (to store the blades) *1 Cap *1 Design knife blade *1 2.35mm shaft collet*1