When you make a purchase through links on our site, we may receive a affiliate commission.
D-Link DPE-301GI 1-port Gigabit 30W PoE Injector White (DPE-301GI)
The D-Link DPE-301GI 1-port Gigabit 30W PoE injector is a compact, lightweight networking device designed to supply power and... moredata over a single Ethernet cable to non-PoE compatible hardware such as IP cameras, wireless access points, and VoIP phones.&.nbsp.Operating as a midspan PSE, it supports IEEE 802.1af and 802.11at standards to deliver up to 30W of power, making it ideal for high-power devices like PTZ IP cameras and 802.11ac access points without requiring a multi-port PoE switch or nearby electrical outlets.&.nbsp.Featuring two 10/100/1000 Mbps RJ-45 ports for LAN input and PoE output, the injector maintains standard network transmission distances up to 100 metres and includes integrated wall-mounting slots for straightforward plug-and-play installation.&.nbsp.Measuring 62.2 mm in width, 109.8 mm in depth, and 24.5 mm in height with a lightweight design of 70 g, the white unit operates in temperatures ranging from -10 to 50 °.C and is fully certified with CE, FCC,...
10,100,1000 Mbit/s. Power over Ethernet (PoE) IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u. White. - Fac... moreilitates deployment of PoE devices where power outlets are not available. - Reduces installation and network equipment costs by eliminating the need for electrical wiring. - Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones. - Lightweight, compact and easy to install. - Supports 802.3af / 802.3at. - 10/100/1000 interface provides flexibility for all types of connections. D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.. The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.. The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.. Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router.. Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.. Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.. PoE Injector and PoE Splitter Tandem. Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a
D-Link 1-Port Gigabit 30W PoE Injector - Facilitates deployment of PoE devices where power outlets are not available- Reduces... moreinstallation and network equipment costs by eliminating the need for electrical wiring- Provides power over existing network cabling to PoE devices such as access points. IP cameras. and IP phones- Lightweight. compact and easy to install- Supports 802.3af / 802.3at- 10/100/1000 interface provides flexibility for all types of connectionsD-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE). even when other devices in the network do not support it. With PoE technology. low voltage DC power and Ethernet data signals are combined on a single network cable. which facilitates powering of end devices like IP Cameras. wireless Access Points (APs). and VoIP Phones. This reduces cable clutter. eliminates the need for dedicated electrical outlets on the wall. ceiling. or other unreachable places. reduces installation time. and lowers costs.The DPE-301GI device supports Gigabit speeds. and can connect to 10Mbps. 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards. which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact. the DPE-301GI is lightweight. has integrated mounting slots. and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building. such as on ceilings or near entryways. and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal. allowing a single Ethernet cable to carry both data and power to a device.Also known as a “midspan PSE”. the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN. which is the network connection.typically connected to a non-PoE switch or router. The other port isfor PoE OUT. which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link. although it’s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W. such as high power 802.11ac APs and IP cameras with PTZ motors. heaters and blowers.PoE Injector and PoE Splitter TandemBoth the DPE-301GI (injector) and DPE-301GS (splitter) can be used together. as a complete PoE transport system. This is especially useful when a PoE switch is not available. and the end device is not PoE capable. but the Network Administrator still
- Facilitates deployment of PoE devices where power outlets are not available- Reduces installation and network equipment cos... morets by eliminating the need for electrical wiring- Provides power over existing network cabling to PoE devices such as access points. IP cameras. and IP phones- Lightweight. compact and easy to install- Supports 802.3af / 802.3at- 10/100/1000 interface provides flexibility for all types of connectionsD-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE). even when other devices in the network do not support it. With PoE technology. low voltage DC power and Ethernet data signals are combined on a single network cable. which facilitates powering of end devices like IP Cameras. wireless Access Points (APs). and VoIP Phones. This reduces cable clutter. eliminates the need for dedicated electrical outlets on the wall. ceiling. or other unreachable places. reduces installation time. and lowers costs.The DPE-301GI device supports Gigabit speeds. and can connect to 10Mbps. 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards. which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact. the DPE-301GI is lightweight. has integrated mounting slots. and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building. such as on ceilings or near entryways. and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal. allowing a single Ethernet cable to carry both data and power to a device.Also known as a “midspan PSE”. the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN. which is the network connection.typically connected to a non-PoE switch or router. The other port isfor PoE OUT. which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link. although it’s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W. such as high power 802.11ac APs and IP cameras with PTZ motors. heaters and blowers.PoE Injector and PoE Splitter TandemBoth the DPE-301GI (injector) and DPE-301GS (splitter) can be used together. as a complete PoE transport system. This is especially useful when a PoE switch is not available. and the end device is not PoE capable. but the Network Administrator still prefers the benefits of PoE. Simply
D-Link 1-Port Gigabit 30W PoE Injector Fast Ethernet Gigabit Ethernet 101001000 Mbit/s 10/100/1000 IEEE 802.3 IEEE 802.3ab I
- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment c... moreosts by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points IP cameras and IP phones
- Lightweight compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections
D-Links DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE) even when other devices in the network do not support it. With PoE technology low voltage DC power and Ethernet data signals are combined on a single network cable which facilitates powering of end devices like IP Cameras wireless Access Points (APs) and VoIP Phones. This reduces cable clutter eliminates the need for dedicated electrical outlets on the wall ceiling or other unreachable places reduces installation time and lowers costs.
The DPE-301GI device supports Gigabit speeds and can connect to 10Mbps 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact the DPE-301GI is lightweight has integrated mounting slots and is easy to install.
The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building such as on ceilings or near entryways and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal allowing a single Ethernet cable to carry both data and power to a device.
Also known as a midspan PSE the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN which is the network connectiontypically connected to a non-PoE switch or router. The other port isfor PoE OUT which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link although its typically placed near the switch/router.
Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.
Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W such as high power 802.11ac APs and IP cameras with PTZ motors heaters and blowers.
PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together as a complete PoE transport system. This is especially useful when a PoE switch is not available and the end device is not PoE capable but the Network Administrator still prefers the benefits of PoE. Simply install
D-Link DPE-301GI Gigabit 802.3af/at 30W RJ-45 100m PoE+ Injector
Powers More Devices The DPE-301GI, offers a ready-to-use PoE solution by offering up to 30 watts of output power. It is co... morempliant with the IEEE 802.3at/af standard, and is designed to be deployed in situations where high bandwidth is demanded. Adding more power-hungry PoE devices or access points is now easier than ever. Cost Efficient Flexibility Deploying the DPE-301GI saves both installation costs and equipment costs, allowing a single RJ-45 Ethernet cable to carry both power and data to each device. This PoE solution frees network devices from the restrictions of power availability by removing the need for a local power source. This reduces cable clutter, eliminates the need for dedicated electrical outlets in inconvenient places, and cuts down the time required for deployment. Reliable Connectivity The DPE-301GI 1 Port Gigabit PoE Injector intelligently communicates with a Powered Device (PD) about the maximum current that is available. This protection feature keeps the device safe from damage by preventing it from powering on in case there is not enough current. This safety feature can also automatically disable the port in the event of an electrical short, or if the current is over 350 mA for IEEE802.3af or 600 mA for IEEE802.3at.
Features:- Facilitates deployment of PoE devices where power outlets are not available.- Reduces installation and network equ... moreipment costs by eliminating the need for electrical wiring.- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones.- Lightweight, compact and easy to install.- Supports 802.3af / 802.3at.- 10/100/1000 interface provides flexibility for all types of connections D-Link´s DPE-301GI 1-Port PoE Injector is used to provide I.T.Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it.With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones.This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface.This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices.Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable.It allows I.T.Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies.The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.Also known as a midspan PSE´´, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible.It has two 10/100/1000 RJ-45 ports.One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router.The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD).The DPE-301GI can be located anywhere on the Ethernet link, although it´s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.PoE Injector and PoE Splitter Tandem Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system.This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE.Simply install
Features:- Facilitates deployment of PoE devices where power outlets are not available.- Reduces installation and network equipment costs by eliminating the need for electrical wiring.- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones.- Lightweight, compact and easy to install.- Supports 802.3af / 802.3at.- 10/100/1000 interface provides flexibility for all types of connections D-Link´s DPE-301GI 1-Port PoE Injector is used to provide I.T.Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it.With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones.This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface.This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices.Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.The DPE-301GI provides a power and data connection to a PoE device over a single network cable.It allows I.T.Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies.The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.Also known as a midspan PSE´´, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible.It has two 10/100/1000 RJ-45 ports.One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router.The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD).The DPE-301GI can be located anywhere on the Ethernet link, although it´s typically placed near the switch/router.Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.PoE Injector and PoE Splitter Tandem Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system.This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE.Simply install
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
