D-Link DPE-301GS 1 Port Gigabit 30W PoE Splitter
Buy D-Link DPE-301GS 1 Port Gigabit 30W PoE Splitter
When you make a purchase through links on our site, we may earn an affiliate commission.
|
| D-Link DPE-301GS 1 Port Gigabit 30W PoE SplitterThe Dpe-301Gs Poe Splitter Is Used With End Devices Such As Wireless Access Points Ip Cameras And Voip Phones That Dont Nativ... moreely Support Poe But Rather Require Dc Power Input Of 5V 9V Or 12V. It Receives Poe Power On A Network Cable From A Poe Switch Or Midspan Injector And Splits The Ethernet And Dc Power Into Two Separate Cables. One Cable Provides The Dc Power And The Other Cable Provides The Ethernet Signal. Users Can Select From 5Vdc 9Vdc And 12Vdc Power For Their Device Using A Selectable Dip Switch On The Device.The Dpe-301Gs Poe Splitter Is Typically Located Near The End Device. It Has Two 10/100/1000 Rj-45 Ports. One Port Is For Poe In Which Is The Network Connection And Is Usually Connected To A Remote Poe Switch Or Injector. The Other Port Is For Lan Out Which Is The Connection That Provides The Ethernet Signal To The End Device. The Dpe-301Gs Also Has A 5.5Mm Dc Out Port. Two Adapter Cables Are Supplied; Either One May Be Connected To This Port Depending On Whether 5.5Mm Or 3.8Mm Interface Is Required For The End Device. Quzo.netDelivery: to United Kingdom Report | £34.07 | | |
|
| D-link DPE-301GSThe DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't nat... moreively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.Features:2-in-1 PoE Injector and Splitter:- Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.- Supports IEEE 802.3at/af PoE Standard- Supports existing non-PoE devices and add new devices even where there are no outlets- Transforms incoming AC power to low-voltage DC power (5 V, 9 V, or 12 V)- Lightweight, compact and easy to install with no additional software required- Connects your devices at Gigabit speeds, receives power up to 100 m away (328 ft)- 10/100/1000 interface provides flexibility for all types of connections Tradeinn.comDelivery: in United Kingdom Report | £35.99 | | |
|
| D-Link D-Link PoE Splitter (DPE-301GS)PoE Splitter / External / Connector Type RJ45 Idealo.co.ukDelivery: in United Kingdom Report | £35.99 | | |
|
| DPE-301GS - Fast Ethernet - Gigabit Ethernet - 10,100,1000 DPE-301GS | £37.20 | | |
|
| D-Link DPE-301GS - Gigabit PoE Splitter up to 30W power output and 100m coverage WhiteBring the benefits of more powerful IEEE 802.3at PoE+ to non-PoE devices with this compact and cost-effective PoE solution
I... morenstall non-PoE devices in locations where there are no outlets without using extension cords or installing electrical infrastructure
Install devices easily by simply setting the correct output voltage (5 V, 9 V, or 12 V) and plugging in Ethernet cables. no additional software is required
Receives PoE power up to 100 metres distance with Gigabit connection speeds
Compact design for unobtrusive placement Amazon.co.ukDelivery: to United Kingdom Report | £43.00 | | |
The Dpe-301Gs Poe Splitter Is Used With End Devices Such As Wireless Access Points Ip Cameras And Voip Phones That Dont Natively Support Poe But Rather Require Dc Power Input Of 5V 9V Or 12V. It Receives Poe Power On A Network Cable From A Poe Switch Or Midspan Injector And Splits The Ethernet And Dc Power Into Two Separate Cables. One Cable Provides The Dc Power And The Other Cable Provides The Ethernet Signal. Users Can Select From 5Vdc 9Vdc And 12Vdc Power For Their Device Using A Selectable Dip Switch On The Device.The Dpe-301Gs Poe Splitter Is Typically Located Near The End Device. It Has Two 10/100/1000 Rj-45 Ports. One Port Is For Poe In Which Is The Network Connection And Is Usually Connected To A Remote Poe Switch Or Injector. The Other Port Is For Lan Out Which Is The Connection That Provides The Ethernet Signal To The End Device. The Dpe-301Gs Also Has A 5.5Mm Dc Out Port. Two Adapter Cables Are Supplied; Either One May Be Connected To This Port Depending On Whether 5.5Mm Or 3.8Mm Interface Is Required For The End Device.
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
How to place an order?How to add store?Remember that online store is responsible for accuracy of information about price, warranty and delivery!