Dark mode
United Kingdom
Catalog   /   Sports & Outdoor   /   Cycling & Accessories   /   Bike Parts   /   Transmission & Shifters   /   Chainrings

Wolf Tooth 5b 130 Bcd

Photos - Chainring Wolf Tooth 5b 130 Bcd
Wolf Tooth 5b 130 Bcd Chainring
from £73.00 up to £76.00 

Buy Wolf Tooth 5b 130 Bcd

When you make a purchase through links on our site, we may receive a affiliate commission.

Wolf Tooth 130 BCD Flat Top Gravel / CX / Road Chainring Drop Stop B 38T WT13038FT

Wolf Tooth 130 BCD Flat Top Gravel / CX / Road Chainring Drop Stop B 38TThe Wolf Tooth 130 BCD Cyclocross Flattop Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satis... morefy your inner tweaker.Bred from ice-cold Minneapolis winters and designed to work perfectly with SRAM 12-speed Flattop chains the Wolf Tooth 130 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation reliability and durability this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud dirt and excess precipitation more efficiently. For additional security in extreme conditions this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up this is the only way to go.Key features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chainsPerfect for 1x setupsMachined in-house at Wolf Tooth’s HQ in Minnesota USABeautiful anodised finishCompatibilityThese rings are for use with 130 BCD 5 arm cranksetsDoes not fit on the cranksets for Shimano DA 9000/Ultegra 6800Not compatible with Campagnolo CX10/11Chain Compatibility10 11 & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chainIf using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retentionSram Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found onlineCan be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position38T important note: The chain may contact the spider arm slightly when using the 38T chainringWe recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring
rarewaves.com
Delivery: in United Kingdom
Report
£73.44

Wolf Tooth 5b 130 Bcd Chainring

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets- Drop-... moreStop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.- Alternating wide/narrow tooth pattern prevents chain derailmentCompatibility:- These rings are for use with 130 BCD 5 arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800- Not compatible with Campy CX10/11.- SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images).- We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring.- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.- This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup.- Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring´s mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.Specifications:- Weight: 38t: 52g - Material: 7075-T6 aluminum
Bikeinn
Delivery: in United Kingdom
Report
£76.99
Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets- Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.- Alternating wide/narrow tooth pattern prevents chain derailmentCompatibility:- These rings are for use with 130 BCD 5 arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800- Not compatible with Campy CX10/11.- SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images).- We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring.- Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting.- This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup.- Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring´s mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.Specifications:- Weight: 38t: 52g - Material: 7075-T6 aluminum
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.

How to place an order?How to add store?
Remember that the online store is responsible for the accuracy of information regarding price, warranty, and delivery!