Wolf Tooth Bag Pump

This low-profile Pump Bag is named for the 12-inch pump it can carry comfortably but that's just the beginning. The bag is large enough for a pair of 29er tubes or lightweight jacket, wallet and even a cell phone. The Pump Bag has four mounting grommets that mate with the B-RAD 3 or 4 base, frame water cage bosses, or top tube fuel tank bosses. It can also be strapped to most frame tubes using the included silicone-backed hook & loop straps.Specifications:- Weight: 114g- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm) (1.9 liter capacity) Silicone-backed straps fit tubes up to 2.5 inches in diameter- Material: PVC backed 420D ripstop Nylon for added protection against the elements, water resistant YKK zipper, silicone-backed straps- Included: Mounting hardware- Tools Needed: T25 Torx- Torque: 3-4 NmCompatibility:- Can be mounted directly anywhere there are bottle cage mounts.- For the most secure and adjustable mounting, use a B-RAD 3 or 4 Base- If mounting directly to frame bottle cage mounts, be sure to use protective tape where the metal grommets (holes) might rub- Can be mounted to most any tube on the frame with the included silicon backed straps- Holds pumps up to 12 inches or 30cm long with room to spare for tubes, phones, tools, clothing and other ride essentials.- Note: always check for appropriate clearance under all riding conditions including under full compression on a dual suspension.- Hardware included is T25 Torx headRecommendations:- When mounted on the underside of downtube check clearances before riding- Choose 2 of 4 grommets spaced at 64 mm (they are the same pitch as bottle cage mounts)