Stages Cycling G3 Power L Carbon SRAM GXP Road Crank Arm STAGXRLEG

##Stages Cycling G3 Power L Carbon SRAM GXP Road Crank Arm The Stages Cycling G3 Power L Carbon Road Crank Arm can be swapped out with the left arm of your SRAM GXP crankset for more tailored training. Train accurately, track your fitness and monitor your recovery by training with power. Knowing your power numbers will give you that edge over your competitors and this unit is extremely lightweight, adding only 20 grams to your base crank arm. With a market-leading accuracy of ± 1.5%, Active Temperature Compensation to eliminate the effects of rises and falls in temperature, and IPX7 water resistance, you can be sure of reliable results no matter the conditions. Power training is particularly useful for carrying out effective interval sessions and with a cadence range of 20 - 220 rpm and reading power of up to 2500 watts, the fastest and most powerful legs will be catered for. Data is transferred to a compatible head unit via Bluetooth or ANT+ and updated radio transmission and a consequent six times increased signal strength ensures excellent reliability. The CR2032 battery lasts for around 200 hours of riding time and an LED on the start-up will give you an indication of when it's time to replace it. When the time comes, this is a simple, tool-free task. Wireless firmware upgrades will keep your unit up-to-date with the latest software and the power meter can be synced to third-party apps such as Strava and Training Peaks. ##Compatibility * Compatible with SRAM GXP road cranksets * Device compatibility: ANT+, Bluetooth Smart ready * Software compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others ##In the box * Non-drive-side power meter * CR2032 coin cell battery * Lifetime access to Stages Link for power meter management and firmware upgrade * Product Identification Card with Serial Number and ANT+ I.D. Number * User guide ##Is my bike compatible with Stages Power Meters? To help find your current crank model, check the inside of the crank arm for the model and length. The next step is to check the power meter's compatibility with your frame; if the space between your crank arm and seat stay fits a 10mm Allen key wrench between 5cm and 12cm from the centre of your bottom bracket, this should be compatible. Still unsure? See this illustration for a guide of where to measure.