Bosch 2608585849 HSS-Co Metal Drill Bit 4.5mm x 47mm x 80mm
Bosch 2608585849 HSS-Co Metal Drill Bit 4.5mm x 47mm x 80mm (Single)
The Bosch 2608585849 single drill bit has a 4.5mm diame... moreter, a working depth of 47mm and an overall length of 80mm. The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip. Suitable for the following materials: Steel/Ferrous Metal, Stainless Steel/Inox, Alloyed/Non-Alloyed Steel, Gray Iron and Hard Plastic.Features:
- HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel
- Cobalt alloy and fully ground HSS provide wear resistance and heat protection
- Two cutters and two flutes remove chips quickly to make the bits last even longer
- Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8Specification:
- Diameter: 4.5mm
- Working length: 47mm
- Total length: 80mm
- Pack Qty: 1
The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime result... mores from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. Pack of 1 • Long Lifetime when Drilling Stainless Steel • HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel • Cobalt alloy and fully ground HSS provide wear resistance and heat protection • Two cutters and two flutes remove chips quickly to make the bits last even longer • Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8 Specifications: Diameter (D) mm: 4,50 Working length (L1) mm: 47 Total length (L2) mm: 80 Materials: Ferrous metals Synthetic material Materials in Detail: Steel/ferrous metal Stainless steel/inox Alloyed/non-alloyed steel Gray iron Hard plastic
The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime result... mores from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. Pack of 1 • Long Lifetime when Drilling Stainless Steel • HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel • Cobalt alloy and fully ground HSS provide wear resistance and heat protection • Two cutters and two flutes remove chips quickly to make the bits last even longer • Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8 Specifications: Diameter (D) mm: 4,50 Working length (L1) mm: 47 Total length (L2) mm: 80 Materials: Ferrous metals Synthetic material Materials in Detail: Steel/ferrous metal Stainless steel/inox Alloyed/non-alloyed steel Gray iron Hard plastic
Bosch 2608585849 TopLine Metal Drill Bit 4, 5 x 47 x 80
Bosch 2608585849 HSS-Co Metal Drill Bit 4.5mm x 47mm x 80mm (Single) The Bosch 2608585849 single drill bit has a 4.5mm diamet... moreer, a working depth of 47mm and an overall length of 80mm. The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip. Suitable for the following materials: Steel/Ferrous Metal, Stainless Steel/Inox, Alloyed/Non-Alloyed Steel, Gray Iron and Hard Plastic. Features: HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel Cobalt alloy and fully ground HSS provide wear resistance and heat protection Two cutters and two flutes remove chips quickly to make the bits last even longer Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8 Specification: Diameter: 4.5mm Working length: 47mm Total length: 80mm Pack Qty: 1
Bosch 2608585849 HSS-Co Metal Drill Bit 4.5mm x 47mm x 80mm (Single)
The Bosch 2608585849 single drill bit has a 4.5mm diameter, a working depth of 47mm and an overall length of 80mm. The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring without wandering are achieved by the pointed split-point tip. Suitable for the following materials: Steel/Ferrous Metal, Stainless Steel/Inox, Alloyed/Non-Alloyed Steel, Gray Iron and Hard Plastic.Features:
- HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel
- Cobalt alloy and fully ground HSS provide wear resistance and heat protection
- Two cutters and two flutes remove chips quickly to make the bits last even longer
- Manufactured to DIN 338, drill bit Type N (flute angle) with a 135-degree tip, diameter tolerance h8Specification:
- Diameter: 4.5mm
- Working length: 47mm
- Total length: 80mm
- Pack Qty: 1
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
