Buy Stanley 1-12-220 Number 220 Adjustable Block Plane
When you make a purchase through links on our site, we may earn an affiliate commission.
Stanley 1-12-220 No.200G Adjustable Block Plane 7"
Small block plane suitable mainly for model makers 25 cutter angle. 35mm cutter width. Block Planes Suitable for end grain wo... morerk or any application where single handed operation is required. The plane bodies are manufactured from fine grey iron ground and polished to a high quality finish. The cutter is set at a low angle this ensures vibration is kept to a minimum producing good results when used on plastic laminates and other man made materials. All have adjustable cutter alignment and depth of cut.
Stanley 1-12-220 Number 220 Adjustable Block Plane
The Stanley 1-12-220 Block Plane is suitable for one-handed operation The Stanley 1-12-220 is a small professional fine grey... moreiron. It is adjustable for the depth of cut and alignment for consistency each time. This model is designed to cut the end grain and is small enough to be used with one hand. Features:
- 40mm blade width
- Iron needs to be honed before use
- Adjustable for the depth of cut and alignment
- Cutter rests at a 21° angle, ideal for cross-grain planing
- Durable epoxy coating provides long-lasting protection
- Finger-rest in front of the plane adds comfort and control
- Grey, cast-iron base with precision-ground sides and bottom Specification:
- Length (mm): 178
- Iron width (mm): 40
This professional general-purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and ali... moregnment. A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45° to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other. A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane. Cutter Width: 40mm (1.5/8in).Length: 180mm (7in).Additional Information:• Number: No.220• Cutter Width: 40mm (1.5/8in)• Length: 180mm (7in)
This professional general-purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and ali... moregnment. A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45° to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other. A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane. Cutter Width: 40mm (1.5/8in).Length: 180mm (7in).Additional Information:• Number: No.220• Cutter Width: 40mm (1.5/8in)• Length: 180mm (7in)
The Stanley 1-12-220 Block Plane is suitable for one-handed operation The Stanley 1-12-220 is a small professional fine grey... moreiron. It is adjustable for the depth of cut and alignment for consistency each time. This model is designed to cut the end grain and is small enough to be used with one hand. Features: 40mm blade width Iron needs to be honed before use Adjustable for the depth of cut and alignment Cutter rests at a 21 angle, ideal for cross-grain planing Durable epoxy coating provides long-lasting protection Finger-rest in front of the plane adds comfort and control Grey, cast-iron base with precision-ground sides and bottom Specification: Length (mm): 178 Iron width (mm): 40
The Stanley 1-12-220 Block Plane is suitable for one-handed operation The Stanley 1-12-220 is a small professional fine grey iron. It is adjustable for the depth of cut and alignment for consistency each time. This model is designed to cut the end grain and is small enough to be used with one hand. Features:
- 40mm blade width
- Iron needs to be honed before use
- Adjustable for the depth of cut and alignment
- Cutter rests at a 21° angle, ideal for cross-grain planing
- Durable epoxy coating provides long-lasting protection
- Finger-rest in front of the plane adds comfort and control
- Grey, cast-iron base with precision-ground sides and bottom Specification:
- Length (mm): 178
- Iron width (mm): 40
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
