United Kingdom

EKWB EK Water Blocks EK Water Blocks EK-XTOP Revo Dual D5 PWM Serial - (incl. 2

Photos - Cooling Systems Accessory EKWB EK Water Blocks EK Water Blocks EK-XTOP Revo Dual D5 PWM Serial - (incl. 2
EKWB EK Water Blocks EK Water Blocks EK-XTOP Revo Dual D5 PWM Serial - (incl. 2
from £210.00 

Buy EKWB EK Water Blocks EK Water Blocks EK-XTOP Revo Dual D5 PWM Serial - (incl. 2

When you make a purchase through links on our site, we may earn an affiliate commission.

EK Water Blocks EK Water Blocks EK-XTOP Revo Dual D5 PWM Serial - (incl. 2

EK-XTOP Dual D5 PWM Serial is a fourth generation high-performance aftermarket DUAL pump top (volute) for D5 type water pumps. The EK-XTOP Revo Dual D5 PWM Serial comes pre-installed with two (2) EK-D5 PWM water pumps operating in series.Using two water pumps in series provides almost twice the head pressure of a single water pump and also guarante... morees top safety measure - in the case of one pump fails the remaining one will provide sufficient liquid flow to prevent any hardware damage due to overheating. Additionally, there is no downtime until next scheduled maintenance. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!The main body (top) is nested between two special rubber shock absorbers that were previously designed from the ground up and are one of the main features of the Revo series of products. This system features a fully rounded design, thus offering greater usability, allowing installation at any angle within 360° of rotation. Furthermore, these rubber shock absorbers are used to de-couple the main pump body from the mounting clip for silent operation, free of vibration induced noise.This product features three G1/4 threaded ports which allow for installation of virtually any G1/4 thread fitting / barb. EK recommends EK-ACF series Compression fittings / adapters. The top is made of quality POM Acetal material, while the tightening nuts are made from CNC machined aluminum. Mounting clamps are made from injection molded ABS. Mounting mechanism with two mounting plates for installing the unit on a 120mm or 140mm fan and easy-to-follow installation guide are enclosed.Specifications:- Motor: Electronically commuted spherical motor- Rated voltage: 12V DC- Power consumption: 2 x 23W- Maximum pressure head: 7m- Maximum flow: 1500L/h- Maximum system temperature: 60°C- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal- Power connector: 2 x Sata Power - and 2 x 4-Pin PWM FAN connectorContents:- EK-XTOP Revo Dual D5 PWM Serial (incl. 2x pump)- Two mounting clips with rubber insert- Two self-adhesive mounting hole pattern sticker- Mounting mechanism and two mounting plates (incl. required Allen keys)- Installation manualMade in Slovenia - EU!Pump motor made in Hungary - EU!
Overclockers.co.uk
Delivery: to United Kingdom
Report
£209.99

EK-XTOP Revo Dual Water Cooling D5 Serial Pump - with PWM (incl. 2x pu

Scan.co.uk
Delivery: to United Kingdom
Report
£215.99
EK-XTOP Dual D5 PWM Serial is a fourth generation high-performance aftermarket DUAL pump top (volute) for D5 type water pumps. The EK-XTOP Revo Dual D5 PWM Serial comes pre-installed with two (2) EK-D5 PWM water pumps operating in series.Using two water pumps in series provides almost twice the head pressure of a single water pump and also guarantees top safety measure - in the case of one pump fails the remaining one will provide sufficient liquid flow to prevent any hardware damage due to overheating. Additionally, there is no downtime until next scheduled maintenance. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!The main body (top) is nested between two special rubber shock absorbers that were previously designed from the ground up and are one of the main features of the Revo series of products. This system features a fully rounded design, thus offering greater usability, allowing installation at any angle within 360° of rotation. Furthermore, these rubber shock absorbers are used to de-couple the main pump body from the mounting clip for silent operation, free of vibration induced noise.This product features three G1/4 threaded ports which allow for installation of virtually any G1/4 thread fitting / barb. EK recommends EK-ACF series Compression fittings / adapters. The top is made of quality POM Acetal material, while the tightening nuts are made from CNC machined aluminum. Mounting clamps are made from injection molded ABS. Mounting mechanism with two mounting plates for installing the unit on a 120mm or 140mm fan and easy-to-follow installation guide are enclosed.Specifications:- Motor: Electronically commuted spherical motor- Rated voltage: 12V DC- Power consumption: 2 x 23W- Maximum pressure head: 7m- Maximum flow: 1500L/h- Maximum system temperature: 60°C- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal- Power connector: 2 x Sata Power - and 2 x 4-Pin PWM FAN connectorContents:- EK-XTOP Revo Dual D5 PWM Serial (incl. 2x pump)- Two mounting clips with rubber insert- Two self-adhesive mounting hole pattern sticker- Mounting mechanism and two mounting plates (incl. required Allen keys)- Installation manualMade in Slovenia - EU!Pump motor made in Hungary - EU!
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters